The water flowing from the taps is not the most best quality. Scale on the walls not only gives an unpleasant aftertaste to brewed drinks, but also increases the heating time of the device, reducing its thermal conductivity.

The same applies to regular enamelled metal teapots. The resulting plaque requires a longer stay of dishes on the stove. As a result, electricity or gas is consumed. Therefore, the question of how to clean the kettle from scale at home remains relevant for many.

It doesn't matter which kettle you use Everyday life- electric or metal. Scale can appear on each of the appliances. And no filters or even boiling artesian water High Quality will not help to avoid this trouble.

For scale - a more terrible threat, since the product can not only begin to fulfill its purpose worse, but also completely fail. And simple appliances can also be so "overgrown" with lime on the inner surface that the use of the strongest cleansers will not help get rid of it.

Therefore, any care must be timely. No need to delay this, postponing the process for later. Otherwise, you risk being left without the device.

For the process of scale formation on each of the kettles, several points are characteristic.

All scale is formed from tap water containing many different salts that settle during boiling on the walls of containers.

Therefore, the question of how to clean the kettle inside from scale worries us much more, because it is much easier and faster.

The rate of scale formation depends on the concentration of salts in tap water and increases in proportion to their number. All newfangled filters can, of course, soften water, but they will not be a panacea for scale.

But not only teapots suffer from scale. It can also harm our body. And, above all, the organs of the urinary system and kidneys.

Citric acid is one of the most effective means in the fight against scale. Its use will not cause difficulties, but it will help to quickly clean the kettle.

Pros - accessibility this tool and its effectiveness. But how to clean the kettle with citric acid? The process is carried out in several successive steps.

• Calculation of the required amount of "lemon". It is related to the degree of contamination of the device. The more scale, the correspondingly large quantity lemon powder should be taken. The best option will use two or three packs per unit.
• Fill with water, about 2/3 of the volume of the dish. If the localization of scale falls on the upper walls, then pour water to such an extent that it covers it.
• Pour the acid into the water and stir until all the crystals are dissolved.
• If the scale is fresh, then there will be no need to boil the "lemon". You can simply prepare the solution in the above way and leave for several hours. After that, rinse the dishes and boil it clean water.
• If the case is more complicated, then the prepared solution should be boiled in a kettle for 10-15 minutes, then pour it out, rinse the product with clean water and boil again.
• It is better to repeat the procedure for fixing the result a couple of times.

Vinegar is another tool that helps to descale the kettle at home.

To do this, water is poured into the device in the same volume as in the previous method, and vinegar is added at the rate of half a glass of vinegar per 1 liter of water. If there is no vinegar, then vinegar essence will do.

In this case, its amount should be reduced (take 3 teaspoons of essence per liter of water). Boil water for 3-5 minutes, let it cool completely, drain and rinse the kettle with water. Repeat boiling only with clean liquid at least two times.

If the old plaque does not go away the first time, then the process can be repeated. Also, softened plaque is removed by rubbing it with a sponge.

However, vinegar should not be used to clean kettles powered by electricity.

Soda is suitable for enameled and electric kettles. It is affordable, but at the same time a universal tool, very effective in the fight against lime deposits on the walls of teapots.

However, you need to be careful with it, because hard grains can ruin surfaces by scratching them.

Most likely, cleaning the kettle with soda will have to be repeated. Because she's enough soft remedy, one application for a heavily damaged surface will not be enough.

You need to fill the kettle halfway with water and pour two teaspoons of soda into it. Bring the water to a boil, then, reducing the flame, boil for 25-35 minutes. Drain and rinse inner surface kettle.

If the kettle is electric with an auto-off mode, then simply leave the water with soda in it until it cools completely after the appliance has boiled.

other methods

It will also help to solve the question of how to descale an electric kettle, ordinary soda. To prevent the inner surface of the appliance from becoming dark color, it is better to use colorless drinks. Sprite is perfect. It must be poured into the kettle and let the product boil. The scale will evaporate after such a process without a trace. The same method will work for a regular metal teapot.

Before you start using soda, you need to let all the air bubbles out of it. You can leave the bottle open or pour the liquid into a spacious dish.

Another effective method removal limescale will be peeling potatoes, pears or apples. They need to be washed, put in a kettle, pour water. Then boil for 5-10 minutes.

In addition to limescale inside the kettle, another unpleasant phenomenon is the appearance of rust. It is associated with an excess of iron contained in tap water and its hardness.

Get rid of rusty plaque it is necessary in a timely manner, because in addition to giving an unpleasant taste to tea or coffee, it can be harmful to health.

Citric acid and vinegar, which were mentioned above, will help not only to remove scale from the walls of the appliance, but also to remove rust. You need to do the same with them as when removing scale from the inner surface of the kettle.

Get rid of rust will help other available and original means and ways.

• Washing powder and potatoes. Sprinkle the powder on a moistened surface and rub these places with half a potato. Rinse thoroughly with water.
• "Coca Cola". Pour the drink into the teapot and leave overnight. In the morning the device will be ready for use.
• Cucumber pickle. Pour it into the kettle and boil for 5-10 minutes. Drain and rinse the dishes with water until the smell is gone.
• Spoiled milk. It is also boiled in a kettle.

Prevention measures

To prevent the appearance of scale and rust, it will not be superfluous to observe a few points.

• After use, leave kettles dry by pouring out all the water. Its residues produce calcium. It is converted into scale and affects the walls of products.
• Clean kettles at least monthly. The more often the procedure is performed, the less effort will have to be expended in the future. In addition, it will help to maintain the performance of the product for a long time.
• Boil in the kettle only distilled water or filtered water.
• Rinse the kettle with a sponge after each use. So it will turn out to remove scale at its initial stage.

There are many tools and methods to help clean the kettle from scale. But their effectiveness will depend on how quickly you get to work.

The longer the kettle will accumulate scale, the more time you will have to spend on washing it. In any case, use the best proven methods, otherwise the risk of damaging the device increases.

Even if you use filtered or bottled water, pouring it into a kettle with a cleaning system, sooner or later you will have to face such a problem as scale in the kettle. In this article, we have collected the most effective ways combat it, as fast and harmless to technology as possible.

What is scale and why it must be removed

Sometimes on the Internet you can find the opinion that it is not necessary to remove scale - it carries a purely visual defect, which plays a role only in glass teapots. Such a statement is fundamentally wrong.

First of all, you need to figure out how scale appears. Most often, ordinary running water is used for boiling, which contains a lot of impurities. However, they are in both bottled and filtered water - though in smaller quantities.

Most of them are various salts, which, when heated, are separated into carbon dioxide and a solid sodium precipitate, which remains on the walls of the dishes. At the same time, it is not washed off with ordinary water and tends to accumulate.

The problem of scale is not only in unaesthetic appearance

Such a coating harms your kettle: it worsens the thermal conductivity, which means that it will take more time to heat up. Because of this, in ordinary teapots, the layer gradually becomes thinner. ceramic coating, if it is, and in electric heating elements fail faster.

However, this factor can be considered rather secondary. The main reason you should fight limescale is the potential health hazard. Since plaque consists of salt deposits, insoluble metals and a variety of harmful impurities, including chlorine, the sediment that enters the body can contribute to the development of various diseases. The mixture can provoke arthritis, gout, osteochondrosis, kidney stones or toxicological poisoning.

That is why you need to clean the kettle from plaque regularly. In the following sections, we'll show you how to do it right.

How often should the kettle be descaled?

The answer to this question depends on two factors - the type of heater and the quality of the water you use.

Glass teapots need to be cleaned almost every week: any coating, even the thinnest, is noticeable on a transparent surface. But metal or ceramic can be cleaned of plaque about once a month - as it gets dirty.

In addition, kettles with an open heating coil need cleaning more than those in which the heating element is closed. Otherwise, the device will fail faster.

As for the quality of water, then see for yourself. Bottled or well-filtered water pollutes the kettle less, but it is not a panacea - only distilled water absolutely does not precipitate, but we do not recommend anyone to drink it - it is too unhealthy.

The quality of tap water depends on the water service, its source, and even the condition of the pipes in your home. Sometimes it is enough to clean the kettle every couple of months, and sometimes after a week a thick layer of scale forms in the tank.

Therefore, it is up to you to decide on the frequency of cleaning your kettle - it is impossible to give an exact answer remotely.

How to prevent scale formation

You will hardly be able to completely avoid the appearance of precipitation - unless you really use crystal clear water, with a minimum of heavy impurities. However, reducing the amount of scale is quite realistic.

• First of all, if the water quality in your home leaves much to be desired, purchase good filter for water. What it will be, cassette or streaming, you decide. Personally, we recommend the faucet attachment, which is by far the most efficient and cost-effective option.
• Do not leave water in the kettle. After drinking tea, part of the water is not used? Pour it out. This will greatly facilitate the care of the kettle in the future.
• Try to clean the kettle regularly with a soft sponge dipped in soapy water. If there is no old plaque on the surface, you will be able to remove particles that have not yet adhered, which will eventually turn into a persistent sediment.

Advice: Even if you do not have the opportunity to purchase a filter, try to defend the water before boiling. A day will be enough.

If it was not possible to completely avoid the appearance of scale or you need to clean the old kettle, we recommend using our recommendations.

Method 1: Clean the kettle with citric acid

Banal food remedy worth a couple of rubles, which can be found in any kitchen, easily copes with scale of mild and moderate severity. The procedure is not particularly complicated: fill the kettle two-thirds with water and add citric acid. The powder should be poured at the rate of one tablespoon for every liter of water.

Citric acid is one of the most available ways clean the kettle

Then turn on the kettle and wait for the water to cool. Drain the water when it has cooled to room temperature. Then wipe the teapot with a soft sponge. If necessary, the procedure can be repeated two or three times in a row until the scale is completely gone. After that, boil the kettle again with clean water and wash it thoroughly.

The method is effective, but it will not cope with the old scale that has eaten into the surface. In addition, it is not suitable for enameled teapots- the surface of the latter may fade from aggressive exposure citric acid. But it can be used for both conventional and electric kettles.

conclusions: Effective, budget and very simple method.

Method 2: Clean the kettle with lemon

For those who prefer to use the most natural products in the kitchen, citric acid can be replaced with lemon. As with the previous method, don't experiment with enameled teapots unless you want the enamel to discolor or crack.

Cut the lemon into thin slices and place in a teapot filled with cold water by two thirds. Then boil it. Further, the procedure is different for conventional and electric kettles.

The most environmentally friendly way to clean your kettle

In the first case, you must wait until the water boils, and then keep the kettle on low heat for 20-30 minutes.

For an electric kettle, you need to boil it several times, after the water has cooled down a bit - on average, reviews recommend three boils with an interval of 10 minutes.

After the water has completely cooled, drain it, and wipe the kettle with a soft sponge to remove any remaining plaque. Most often, a second procedure is not required, but if necessary, you can boil the lemon again. Bonus - pleasant aroma that will spread throughout your kitchen.

Method 3: Clean the kettle with vinegar

First of all, it should be noted that this technique is not suitable for electric kettles: vinegar can only be used for ordinary metal ones. However, for them, this method is very effective and convenient.

As in previous cases, you need to fill the kettle by two thirds. Add vinegar, about half a cup per liter. If you are using a concentrated essence, you will need one and a half tablespoons for the same amount of liquid.

Measure the amount of vinegar carefully

Boil water and leave to cool for one hour. Then just drain. Wipe stubborn stains with a soft sponge - they will go away. After cleaning, it is necessary to boil the kettle with plain water two or three times.

Important: Please note that when heated, vinegar emits a very pungent aroma, so the procedure should be carried out only with open windows or a powerful hood turned on.

Method 4: Clean the kettle with baking soda

An inexpensive and safe way to get rid of even the oldest and toughest scale is to use baking soda. It is suitable for all types of teapots, including enamel ones.

It is important not to overexpose the soda in the kettle

However, baking soda should be used with care - it can scratch the surface, so do not try to just wipe off the plaque with it. In addition, in order to get rid of the old layer of scale, you will have to repeat the procedure at least three times.

In half a kettle of water, add one tablespoon of baking soda (no more!). For ordinary teapot Boil water for half an hour. For electric, it is necessary to turn on the boiling mode several times. Forum users claim that three or four times is enough.

Method 5: A mixture of vinegar and baking soda for cleaning kettles

As everyone knows, when soda is added to vinegar, a chemical reaction occurs. You can use it to clean the scale from the kettle, but you should be careful - you can’t just fill the kettle with vinegar and pour soda. Such an aggressive impact will damage the container.

Soda and vinegar, when mixed, give an active chemical reaction.

You need to fill the kettle two thirds and add one tablespoon of baking soda to a liter of water. Then pour half a glass of vinegar into the tank or add three tablespoons of vinegar essence.

Bring the water to a boil and keep the kettle on low heat for half an hour. Then wipe off any dirt with a soft cloth. This method is not suitable for electric kettles, but it perfectly cleans old scale from ordinary ones.

Method 6: Remove old scale with soda, vinegar and citric acid

This method cannot be called gentle: it acts very aggressively on the surface, so it is permissible to use it only if the kettle has not been cleaned for several months and a thick layer of scale has formed inside.

This method is only suitable for the oldest scale

In order to clean the kettle, you will need to boil water in it three times for 30 minutes. The first time - with a tablespoon of soda, the second time - with a tablespoon of citric acid, the third time - with a half glass of vinegar. For each case, water should fill the dishes by two-thirds.

After the last boil, carefully wipe the kettle with a sponge, and then boil it several times with clean water. It is very important to ventilate the room well during the cleaning process, as vinegar emits extremely bad smell when heated.

Method 7: How to clean the kettle with Cola, Sprite or Fanta?

Oddly enough, however, this method has a right to exist.

First of all, a few rules:

• Don't use this method on electric kettles with an open heating coil - the sugar in drinks will do more damage to the coil than scale.
• For enameled surfaces, choose drinks without dyes, otherwise the shade of the container may change in a completely unpredictable direction.
• If there are scratches inside the kettle, the method should also be abandoned - dyes can eat into the damaged surface.

The cleaning process itself is quite simple. Fill the kettle half way with drink and turn it on. Leave it for 20 minutes after the liquid boils. Drain it and rinse it with clean water.

Cola is not only a drink, but also an excellent cleaning agent.

It sounds incredible, but even old scale can be cleaned in this way. However, another question arises here - how safe is it to drink such drinks if they remove something that aggressive detergents do not always cope with.

Method 8: How to clean the kettle with apple peels.

Another method from the category of "Unbelievable, but true." It does not always work: if the scale is old, it will not work in this way to get rid of it. But with a newly appeared plaque, the method works perfectly. In addition, it is considered one of the most gentle. It can be used for glass teapots - it's both eco-friendly and will help give them a shine.

The method is suitable for fans of savings: no waste!

Simply boil two handfuls of apple peel in half a kettle of water for 20 minutes. For electric kettles, you can turn on the boil mode 2-3 times. Then leave the device for two hours. After that, you can drain the liquid and wipe the kettle from the inside with a soft cloth. Rinse it well - a clean kettle is ready to use!

Method 9: Use brine to clean kettles

Frankly, this method is not for everybody. It is difficult to imagine a person who likes the smell of boiling brine. However, if you are not sensitive to aromas and the naturalness of the product is important to you, you can experiment.

It is necessary to pour the brine into the kettle, boil and leave for half an hour. Then drain the brine and rinse the kettle with clean water.

Boiling brine will not appeal to everyone.

True, not every brine is suitable - only one that contains vinegar or citric acid. It is through their action that the effect is achieved. But here the question arises: why boil the brine, if you can just use acid or vinegar?

Method 10: Chemical Descalers

If a quick result is important to you and you don't want to experiment with your own kettle, you can just go to the hardware store and get a descaling agent.

Antinakipin, Cinderella, Glitter ... There are many options, for every taste and budget. We recommend that you carefully study the composition: some drugs should not be used, as they can have an aggressive effect on the coating of the kettle or harm your health.

If you do not want to experiment on the teapot.

On the other hand, most safe means contain as an active ingredient all the same citric acid or soda. So is it worth paying more?

In any case, you can use any of the methods we have given - depending on the type of kettle you have, of course.

Scale builds up over time in any kettle, electric or metal. It accumulates most quickly from hard water, abundant in magnesium and calcium salts. In this case, it is recommended to clean the water-boiling utensils weekly. Today, the editors of the site decided to draw the attention of their readers to this problem. In this publication, we will talk about the seven best and proven ways to descale the kettle in folk ways, as well as using chemicals.

Read in the article

Dangers of scale formation in the kettle

If you do not use a purchased drinking water for boiling, the problem of scale will sooner or later become an edge. After all, any tap water, even purified by a filter, contains a certain amount of metals and salts. When heated, the substances react and precipitate, which settles in the form white coating on the walls.

Comment

Design studio "Uyutny Dom"

Ask a Question

« If she blue tint, then there is a lot of copper or brass salt in it. If red, closer to red, - iron, and if brown, then your water is replete with manganese.

There are three main dangers that a person may face if he neglects the rule of regularly cleaning the kettle:

1. Breaking household appliance. Frequent failure of the heating element in the kettle or the walls and bottom of metal dishes for heating.
2. Long heating. It is known that every millimeter of scale increases the energy consumption of the kettle by 10%. Boiling water comes into contact not with metal, but with a layer of rust and grease. AT electrical appliance overheating of the heating element and plastic occurs, in metal - the walls heat up unevenly, when boiling, rust particles fall into the water.
3. Accumulation of salts in the body. Plaque forms a kind of film, under which bacteria develop, they destroy the metal. Small particles of rust and perekal enter the body along with water, gradually accumulate inside. In the future, this may affect the functioning of the kidneys and urinary system.

How to clean the kettle from scale

Agree, before buying strong chemical compounds that abound in the market, each of us wants to try something that is effective, but also cheap and cheerful. Folk methods of dealing with scale just meet all these requirements. And let's start, perhaps, with the most popular method - cleaning the kettle from scale with citric acid. Probably, among the readers of our online magazine there is not one who has not heard about this tool. However, hearing does not mean using. That is why we have prepared simple step-by-step instructions that will make this process as fast and efficient as possible.

Method 1. How to clean the kettle from scale with citric acid

This method is most often used to clean an electric kettle, since vinegar (another grandmother's remedy) can simply corrode the plastic. This method perfectly helps with light pollution and, if necessary, “refresh” the plastic on the kettle body.

For the cleaning process we need:

1. A couple of tablespoons of citric acid (or the juice of half a lemon).
2. 500 ml cold water.

The cleaning process is very simple. First you need to boil water. After the kettle boils, pour out the citric acid (the water will hiss). Leave the kettle in this state for a couple of hours until the water cools down.

Important! Make sure that at the time of cleansing, no one in the household drinks water from a kettle with acid. Despite the fact that the tool itself is safe, however, rust and plaque that has moved away from the walls and the heating device can be dangerous for internal organs.

Actually, procedures with citric acid can be preventive. It is not necessary to wait for the appearance of sediment or plaque, you can simply periodically pour warm water into the kettle and pour a spoonful of citric acid into it. The exposure time is the same, but boiling is not required. Such simple actions will help keep your kettle in excellent condition for several years.

Method 2. How to get rid of scale in the kettle with vinegar

Vinegar is one of the most aggressive non-chemical methods for cleaning the boiler, suitable only for metal utensils. However, it is the fastest and most efficient.

In this case, you must first prepare a solution in the ratio of 50 ml of vinegar to 500 ml of water. The solution is poured into our kettle, which must be put on fire. In the process of boiling, the vinegar will gradually begin to corrode the plaque. If boiling is not enough, you need to wait for the appliance to cool completely, then rinse the kettle with a hard sponge with baby soap to remove the remaining vinegar.

Method 3. How to remove the scale in the kettle with soda

We will separately consider the sequence of actions for electric and enameled kettles. For aluminum or any other metal utensils, the following recipe is suitable: dissolve one tablespoon of soda in a kettle of water. We boil over high heat, and then reduce it and spend another half an hour simmering our mixture. This is often enough to remove plaque from the walls and bottom of the dishes.

For electric kettles, the procedure should also not cause difficulties. The procedure is the same as in the case of cleaning the kettle from scale with citric acid. The cooling process alone takes more than 2 hours. You can not boil the kettle, but dissolve the soda in warm water and wait at least an hour as well. In this case, even if not all the sediment “falls off”, it will be much easier to clean it with a sponge.

Comment

Design studio "Uyutny Dom"

Ask a Question

« To achieve the maximum effect, it is better to use not food, but soda ash.

Method 4. When nothing helps: a special recipe for cleaning the kettle with citric acid, soda and vinegar

In this case, it is very important to follow the sequence of steps. The secret is in the order in which each tool is used. The first stage is cleaning with soda (how to do this, we described above). Next, pour the water into the kettle again, dissolve the citric acid, in this case it is not necessary to boil the water, it is enough to heat it over low heat. Drain the water again. Now it's time for the vinegar. In this case, boiling is necessary. Half a glass of 9% vinegar is added to the water solution, and the solution is brought to a boil. In this case, the cleanliness of the walls and bottom of the kettle will be provided to you.

Method 5. How to wash the kettle from scale with carbonated drinks

This is because, despite many myths regarding the acidic properties of this popular sparkling water, there is salt in it, or rather acid ... already known to us, citric acid. Yes, yes, it is thanks to this powder that the drink receives such miraculous properties: it cleans scale and plaque, by the way, it also applies to tooth enamel.

But back to our ... teapots. In order not to look exactly like this in the eyes of our esteemed readers, we decided to conduct a visual experiment and find out if this method is so effective. So, step-by-step instruction descaling the kettle with a famous brand of carbonated drink.

Illustration	Action Description
	We take an ordinary plastic teapot. For the purity of the experiment, we took clear glass to see the result. As you can see, scale is present.
	We will need the actual bottle of Coca-Cola (some recommend that you first release the gas from it). We didn't. And the kettle itself.
	Pour the soda into the kettle.
	Turn it on, bring it to a boil.
	After the kettle has cooled, drain the liquid. And here is the result - the kettle is almost new.

Let's add that this method suitable for cleaning glass, metal utensils and electric kettles, excluding only tin and enameled utensils.

Note! Coloring sodas, such as Sprite and Coca-Cola, are also effective in cleaning car carburetors from rust and burning. So, if you have car enthusiasts in the house, it's better to leave half a bottle for them.

Method 6. How to clean scale in a kettle using apple or potato peels

What we need: potato and apple peels (lots). The procedure is similar to steaming apples, only vegetable and fruit waste is used here. Cleanings are placed on the bottom of the kettle, steamed with boiling water or cold water. Boil the mixture well. After half an hour of boiling, we leave our "baland" to cool. After about an hour and a half, you can wash the dishes with a regular sponge.

Method 7. How to remove scale in a kettle with brine or oxalic acid

Both methods are based on the fact that both brine and sorrel contain a considerable dose of acid. In the first case, already known to us, lemon, and in the second - oxalic. We already know the principle. If you are not suffering from a hangover, then use a brine to clean the kettle.

Household chemicals for descaling

We have studied the reviews of some customers and we will take the liberty of bringing you the top five descaling products, according to the editors website.

Scale not only worsens taste qualities boiled water, but also serves as a kind of fur coat, which does not allow the heating element to actively give off heat. As a result, it may fail prematurely. How to effectively remove deposits and return the kettle to a radiant look?

There are many folk ways for cleaning the kettle from scale at home, they used to be used by our grandmothers mainly for cleaning metal teapots which were impossible to break. Everything that came to hand, so it was cleaned.

Lemon acid

Fits for simple and electric kettles made of stainless steel or glass
It is forbidden use for metal, enameled teapots.
pros: cost savings.
Minuses: helps with small impurities

Citric acid helps to restore cleanliness not only to kettles, but also to the tanks of automatic washing machines. The principle of operation is quite simple. The acid loosens the deposits and helps the water dissolve them.

In order for the teapot to acquire virgin purity, you need 1-2 tsp. powder dissolve in 1 liter. water and boil in a dish to be cleaned. If you have water with increased hardness and deposits build up quickly and in large quantities, then the procedure should be repeated a couple of times. In this case, you are more likely to achieve the desired result.

To prevent deposits, use a strong solution of citric acid (1 sachet per 1 liter of water) for cold dishwashing. You don't need to boil anything. Just dissolve the powder in the liquid.

Remove scale from a kettle with vinegar and baking soda

Vinegar, baking soda and citric acid

Cleaning the kettle with baking soda

Fits for ordinary, enameled and electric kettles.
pros: security, accessibility, cheap way, which will help get rid of old scale.
Minuses: May leave scratches on surfaces.

Alkaline solutions cope with deposits somewhat worse than acids. However, if nothing else is at hand, you can resort to soda. Moreover, boiling soda solution effectively cleans not only kettles, but also smoked pans and pots.

Pour 1-2 tsp into a three-liter kettle. soda and boil water with it for about half an hour. Then let the water cool down and wash the container in the usual way. If dirt still remains, repeat the procedure a couple more times.

Cleaning the kettle with Coca-Cola

Fits for all types of kettles, except for electric ones. Care must be taken when cleaning enameled models.
pros: effective method.
Minuses: dyes that are part of the drink can eat into the surface of the device.

What hostesses do not do with the famous American drink. It turns out that with a touch of hard water, he copes no worse. professional tools. Before. how to proceed to cleaning, open the bottle and let the soda stand overnight so that the gas comes out of it.

Pour the drink into the teapot up to half the volume. Boil and rinse with a soft sponge or cloth.

When working with Cola, you need to take into account that light plastic can be stained. Use this method with caution in devices with an open heating element.

Cucumber pickle and tomato

Fits for all types of teapots.
pros: availability, cost savings (since by and large, is a handy home remedy)
Minuses: does not remove strong dirt from the surfaces of dishes, may leave an unpleasant odor that can be felt during boiling water.

Some housewives claim that boiling brine in a kettle removes scale as well as citric acid. How plausible is this? Can salt dissolve salt? There is a rational grain in this, since vinegar is included in the recipe of many marinades. It creates an acidic environment in which magnesium salts may well dissolve.

So, for work you will need one and a half liters of brine from under a tomato or cucumber. Boil it in a kettle, then wash the container in the usual way.

Peeling apples and potatoes

Fits for enameled, metal, electric kettles.
pros: availability, environmental friendliness, economy.
Minuses: does not help to get rid of ingrained plaque.

Apple and penny peels contain fruit organic acids. They can be used to remove light plaque. It is enough to boil water with the addition of cleaning products, and the deposits can be easily washed off.

Potato is an alkaline product. Its action is like soda. You need to use the peel of a potato, as well as peeling fruits. Just boil it in water and rinse thoroughly.

Heavy artillery

Fits for all models.
pros: high efficiency, helps to get rid of the most difficult stains.
Minuses: chemical composition, can cause a local reaction of the body. Must use rubber gloves during cleaning.

In severe cases, sparing methods are ineffective. In this case, you have to use stronger means. Keep in mind that such procedures cannot be used frequently. Otherwise electric kettles may fail.

• Vinegar. For 1 liter of water, take 1 cup of 9% vinegar. Boil the solution in a clean kettle and hold for 15 minutes on low heat (if the dishes are enameled or made of stainless steel).
• Funds household chemicals . There are a great variety of antiscalers. Before use, you must carefully read the instructions and make sure that the selected composition is suitable for your type of dishes. The manufacturer is obliged to inform users that the ingredients of the product may damage the plastic, rubber gaskets or metal bushings of the kettle. If there are no such marks, antiscale can be safely applied. Examples of popular chemical decalcifiers: CleanFF, Planet Pure Spray, Selena, Doctor TEN universal, HG, Cinderella.

Cleaning features for teapots of various materials

Plastic and glass

Glass is considered a versatile material because it can withstand the effects of aggressive substances. It is not for nothing that laboratory glassware is made from it. Nevertheless, it is worth remembering that glass surfaces do not like abrasives. If you use baking soda for cleaning, do not rub it against the walls of the kettle, but only boil the soda solution.

Plastic equally does not like products with bleach and dyes. Therefore, it is better not to experiment with Coca-Cola, Fanta and fruits in plastic dishes.

Enamel and stainless steel

Enamel can be stained in the presence of bright dyes, regardless of their composition. In addition, it does not tolerate sudden changes in temperature. Therefore, first you need to fill cold water, bring it to a boil, and then rinse either hot water or let the kettle cool down to room temperature.

Stainless steel, like glass, can withstand almost any experiment with cleaning products. Dislikes abrasives. small scratches spoil the beautiful gloss, although they do not affect the functionality.

Electrical Models

You can find two types of electric kettles: with an open heating element and a closed one. In the first case, cleaning is complicated by the fact that the scale is clogged under the heating element, from where it is difficult to get it mechanically. In this case, it is better to use natural or factory chemicals.

When using acids and other aggressive substances. it must be remembered that in an acidic environment with frequent cleanings, seals and rubber gaskets gradually dissolve. For this reason, it is better to alternate sour and soda procedures, and also not to start the situation until you need to resort to emergency ways cleaning.

Cleaning a stainless thermos from tea plaque

• A cleaning solution from the proposed methods above is poured into a thermos and left for several hours. Periodically you need to check the condition of the raid. Rinse with soft purified water.
• Avoid using abrasive products.
• Wash the thermos immediately after use. Wipe the flask with a microfiber cloth. So the water will leave much less sediment.
• Ventilate the thermos after cleaning to dispel cleaning agent odors.

As you can see, dealing with plaque on teapots and in a thermos is quite simple. For this, ordinary ingredients that can always be found in the kitchen are quite suitable.

Dear readers of the site, leave your comments. Tell us which of the cleaning methods you consider the most acceptable and effective. Your opinion is very valuable to us.

May 22, 2017 Werri

Instruction

The easiest way is to buy any "anti-scale" in the store and clean it following the instructions. Such a tool, as a rule, costs. But, if you want to protect your health from accidental ingestion of chemicals, it is better to use natural remedies.

Boil the resulting solution and leave for at least two hours, and if possible, overnight.

After pouring out the solution, thoroughly rinse the kettle running water and boil again to remove the remaining vinegar and scale.

In addition to acetic acid, citric acid can be used to combat scale - 1 tablespoon per 1.5-2 liters of water. Pour the acid into the kettle, fill it with hot water and leave for 15-20 minutes. It is not necessary to boil the solution. If the raid was not very strong, then after the specified time the kettle will shine like new.

In the absence of citric acid and vinegar in the house, do not despair. It may be unexpected, but in the past, grandmothers got rid of with the help of an ordinary!

Take clean potato peelings, cover the bottom of the kettle with them and add 1.5-2 liters of cold water.

Drain the cooled water and rinse the kettle well with tap water.

If you are still unhappy with the result, try another very extravagant remedy.

Use a special descaling pencil. Heat the iron to 100°C, apply the product evenly on the soleplate and leave it in this state for several minutes. Then delete scale cotton fabric. Pour in clean water and clean the holes with steam.

Delete scale with an iron table vinegar. Prepare a solution of 1 cup of water and 1 tablespoon of vinegar. Pour the liquid into the iron and turn on the steam function.

Clear washing machine from scale with a special tool, for example, Antinakipin. It can be bought at a hardware store. Before use, read the instructions or consult the seller.

Pour the product into the washing drum, set the mode at a temperature of 60-90 ° C. To prevent the formation of scale, carry out a similar procedure regularly - once a month. If in your city or area poor quality water, do prophylaxis every.

Tip 4: How to descale the kettle with improvised means

Scale in the water appears due to the content in it of a large amount of salt and impurities that settle on the bottom, walls and heating element of the electric kettle. If not on time, then this may affect a quick breakdown, or the process of heating water will be longer. In this case, scale affects the body negatively, destroying the kidneys and the genitourinary system.

The easiest way to remove scale is with citric acid. To clean the scale, you need to buy one bag of food-grade citric acid. Pour the acid into the kettle. Pour cold water into it and leave for several hours. Then pour everything out of the kettle, pour fresh water and boil several times.

If citric acid did not cope with scale, then pour 100 g of 9% vinegar into the kettle with water, then boil this mixture, pour it out and rinse the kettle thoroughly.

Fanta, Sprite or Cola soda is suitable for descaling. It is necessary to remove gases from them, fill the kettle by 1/2 and boil.

Potato peels are also suitable along with apple peels. They should be washed, put in a kettle of water and boiled several times.

If the kettle has a high scale content, then you can do the following procedure: Pour a full kettle of water, add 1 tbsp of soda and boil for 30 minutes. Change the water, add 1 tablespoon of citric acid and also boil for 30 minutes. Change the water, add 150 g of vinegar, boil. With this method, the scale will become soft and must be removed with a sponge.

Related videos

Tip 5: How to descale a stainless steel kettle

Lime deposits in water not only make it hard - when boiling, substances settle inside the kettle, forming scale on the walls. Depending on the material of the kettle, scale will form on it less often or more often.

In stainless steel, scale forms somewhat more slowly. However, it cannot be completely avoided. Scale slows down the process of boiling water, and if it does, then it takes a lot of electricity. Deposits can harm not only the kettle, but also the person who drinks the water boiled in it. The filters installed on the spout are of little help in solving the problem.

Scale prevention

Most The best way to combat scale - to prevent its formation at all. The rules to follow for this are quite simple. For boiling it is necessary to use soft and clean water, passed through a filter or settled. It is necessary to boil a portion of water once. Water that has already boiled should not be heated - it is better to replace it with fresh water. Before each use, it is advisable to rinse the teapot well from the inside, rinse from the resulting white flakes, the walls of the teapot should be cleaned of plaque more often.

Means with which you can remove scale

In hardware stores you can buy quite effective means to deal with scale, like Silita, Antinakipin. Their use is almost the same: basically, the funds must be poured into a kettle, pour water and boil. After about fifteen minutes, the kettle should be rinsed with clean water.

If a reddish scale forms during boiling, citric acid will help. But for enameled it is better not to use it. Prepare a solution of a liter of water and a teaspoon of acid, boil it. Leave for 10 minutes and boil again. If the raid still remains, after the second boiling it is not necessary to drain the water - it is left in for another couple of hours.

You can clean your stainless steel kettle with a mixture of vinegar and baking soda. Suitable for those who can easily tolerate the smell of vinegar. Mix soda with water until gruel and rub into the walls of the kettle. After that, dampen a cloth with strong vinegar, wipe over the slurry. Baking soda and vinegar react and can be done very easily.

Scale can be removed with soda water - Coca-Cola or Sprite. The liquid must be poured into the kettle, boiled and left for about 10 minutes. Then drain everything, and rinse the kettle. For teapot white color it is better to use a sprite - so that the dye does not spoil the whiteness.

Whatever tool is chosen - soda, sparkling water or specialized household chemicals - descaling should be done regularly. Then the cleansing is much easier, and the scale will form much less.

tap water, which is poured into the kettle, contains a large amount of different salts. They gradually settle on the inner surface and on the bottom of the kettle, resulting in scale formation. It must be removed regularly - there are a lot of means for this, and you can choose any convenient way.

You will need

• - means of household chemicals for descaling;
• - vinegar;
• - baking soda;
• - lemon acid.

Instruction

Pour into the kettle special remedy for descaling. It can be Antinakipin, Antinakip or other household chemicals with a similar effect. They are very easy to use - you just need to fill them with water and boil. This method can be called the easiest, but at the same time it is far from the most useful. Cleaning products contain many chemical substances, which even after repeated rinsing may partially remain in . If they enter the stomach, they are dangerous to the body.

Try to descale more in a safe way- using the usual . Boil water, add three tablespoons of soda to boiling water. After that, the water should cool down. After about half an hour, boil the kettle again. Pour boiling water, and fill the kettle with hot water with the addition of a couple of tablespoons of vinegar essence. Boil water again and cool the kettle. After carrying out these activities, the scale becomes loose, it is very easy to remove it with a regular dishwashing sponge. This method is good for running ones. No matter how thick the scale layer is, it begins to move away in thin plates.

Take citric acid - two sachets are enough for a standard three-liter kettle. Pour the powder into cold water and boil. Leave the water in the kettle for about half an hour, then drain, pour fresh water and boil again. The acid will easily break down the scale. After that, the kettle will need to be thoroughly rinsed so that there is no aftertaste left. This method is perfect for descaling both in simple and in. But for metal teapots, citric acid is contraindicated. In the process of dissolving the scale, the acid roughens the inside of the kettle, and new scale will form in it much faster. With a thick crust of scale, citric acid will not cope.

At the moment, the electric kettle has become a decoration of the kitchen and indispensable assistant however, a problem such as scaling may occur as a result of repeated use. If left untreated, lime scale can cause an unpleasant taste in water and damage the appliance. In order to remove scale in the electric kettle, you can use the following tips.

On the heating element the teapot and its walls form a plaque, which is an ordinary salt that has settled on the surface. Before cleaning, you need to figure out what is the cause of limescale. Sometimes it's about the quality of water: then it is necessary to replace it with a better one.

In order to remove scale, you will need the most simple products, which are in the kitchen of most housewives.

1. You will need 2 tablespoons of vinegar and 50 g of citric acid: pour vinegar into the kettle and then pour lemon, boil the kettle and leave it with this mixture for 60 minutes. After the specified time, the plaque can be easily washed off with a sponge. If the first time there is a plaque, then you can repeat the procedure. Sometimes lemon is used instead of citric acid.

2. Baking soda is an excellent tool for cleaning the kettle. First, pour water into the kettle, then pour 1 tablespoon of table salt there, boil the water and leave for 30 minutes, then pour water into the kettle again, add 0.5 teaspoon of citric acid and put it on fire again. After the water has cooled, you can start washing the kettle with a kitchen sponge.

3. Vinegar also helps to clean the kettle: pour a third of vinegar and two parts of water into the kettle, then boil the water and leave it to cool. Scale in the kettle under the influence of acid will dissolve, then it can be easily washed off.

4. One of the most unconventional cleansing methods is the use of regular sparkling water. Pour water into a kettle, bring to a boil, and then drain. After this manipulation, the limescale should move away.

5. Keep in mind that there are a large number of household chemicals in stores for cleaning limescale. Sometimes such funds are quite expensive, and the result is not so effective, so you can use the methods.

Consider the following points:

1. After carrying out the cleaning procedure, the electric kettle must be rinsed, otherwise the substances that you used for cleaning may enter the body along with drinks.

2. Most the best remedy in the fight against scale - this is the daily care of your electric kettle.

Related videos