How to equip a children's house inside. Playhouse for children: step by step photos, diagrams, drawings

Do-it-yourself children's house at their summer cottage - great gift kids. It can be built from different materials and sizes may vary. You can create something like this design (photo No. 1), and if there is space, the structure can be built much large sizes. Consider several options for building houses.

How to build a house for children

A do-it-yourself children's playhouse can have dimensions of 160x160x140 cm with a roof 90 cm high. To create it, you need to prepare:

foundation blocks - 4 pieces;
metal fastening corners;
bars for making the floor - 11 pcs.;
floorboards - 4 pcs.;
lining;
platbands;
furniture shield;
dye;
bars for the roof - 5 pcs.;
ondulin;
edged boards;
screws, nails;
beam holders.

The work itself is carried out in several stages.

Stage 1. We make the floor frame. For it, you need to mount the base, aligning it diagonally. After alignment, the design is reinforced with corners.
Stage 2. We choose a place for construction. The place must be level. The finished frame is laid on the ground, the points of attachment of the foundation are marked.
Stage 3. Giving stability to a children's wood product. In the marked places, they dig recesses and stack them foundation blocks. They are buried to the depth of the spade bayonet. They must lie flat. This is checked by the level. On the upper part blocks need to be waterproofed so that moisture does not get on the floor.
Stage 4. We build the floor. To do this, the entire frame is sewn up with boards. The floor must be level and free from roughness.
Stage 5. The floor needs to be processed. This is done from the side of the ground. A layer is applied with a brush or roller that protects the wood from fungus and mold.
Stage 6. Creating racks and rafters. TO finished floor bars are attached and reinforced with corners (photo No. 2). Roof rafters (3 pieces) are attached to the racks. They are leveled or plumb and fixed with metal holders.
Stage 7. Frame sheathing. The finished frame is sheathed with a blockhouse or clapboard (photo No. 3). You can sheathe a structure for children in the country house from the outside and from the inside. Lay slabs between layers of wood mineral wool for building insulation.
Stage 8. Creating a roof. The roof is covered with ondulin. This material is good to cut with a grinder. For decoration, many masters use carved board. The same board can sheathe the corners of the constructed building. It would be nice to decorate doors and windows with do-it-yourself platbands (photo No. 4).
Stage 9. Do-it-yourself home-made benches and a table are installed inside the house for children. play house ready for children to give with their own hands. It remains only to paint it in various bright colors.

Do-it-yourself children's playhouse (video)

Other options for building a house

How to do children's house for a child and his friends at their summer cottage? Ideas can be very different. Here are some of them:

The house for the child can be placed on a natural elevation. Solid wood is used instead of the foundation. Curtains can be hung on the windows. This will make it possible to hide the room from prying eyes.
Windows can be glazed, and doors can be made quite tight. The house can be given the appearance of a real home. But this will require a special approach to its creation.
A massive do-it-yourself wooden children's house can be made with a spacious room located on the second floor. The usual entrance to it can be supplemented by a slide. To climb this hill, you need to make a ladder with a railing. This design is sure to please your child. Wooden house for children younger age in the country it is easily equipped with a sandbox below, which is arranged under the house.
A wooden house for children in the country with their own hands can be painted in pink color. Girls will appreciate it. To him you need to build a small veranda on which to place flowers.
A plywood house will look bright in the landscape if it is painted blue. Spacious porch and walkway paving slabs complement the building.

There may be other ideas. Wooden houses for children in the country are completely panel board assembled very quickly and cost long years. Not in vain, after all, any Kindergarten equipped with such structures.

Non-traditional play houses

You can make a wooden children's house not only in the country, but also right in the main dwelling. Any tent can become a personal fortress for a child. How to build playhouses indoors? Again, there are different ideas. The wooden house is very good. But inside a residential building it is better to use cardboard or cloth. Home tent that stretches over the table - perfect solution. To make it, you need to measure the length, width and height of the table. The fabric is better to choose dense. The windows in the house are made of polyethylene film. Instead of a door, a zipper or other fastener is inserted. On the walls you can draw cartoon characters. The fabric house can be easily disassembled and does not take up space.

The play area for children is also made of cardboard. Its construction does not require the skills required wooden house. Enough to have required amount cardboard, paint and simple tools. Window and door openings are cut out in cardboard with a sharp clerical knife. At enough material, the final result depends only on the imagination of the manufacturer. You can come up with your own schemes for manufacturing and internal equipment of the house. In any case, it will bring joy to your child.

How to make a children's house (video)

Conclusion on the topic

Country cottage area is intended for growing vegetables, fruits, berries, herbs, as well as for the recreation of adults and children. Swimming pools and alpine slides with dry streams. With a sufficient area of the site, many also build children's playhouses. They have different designs and built using various materials. You can build a children's house in the country from wooden boards, from plywood, lining and timber, brick and concrete are spent on its arrangement. You can make such a structure from fabric, cardboard boxes and other materials. The construction of a building in the country does not take much time and is mostly quite cheap. The best place for its placement - between the trees, on a hill. You can lead a path to it.

Of the tools you may need: a hacksaw, a jigsaw, a screwdriver, a glue gun, a drill, keys and screwdrivers, chisels, a level, a plumb line, a tape measure. All work is best done by two people. First, the frame is assembled on the foundation, then the walls are sheathed and the roof is erected. The playhouse can be equipped with furniture, curtains, electric bells and lights. Used for lighting and LED strips. Children will be delighted with such a building.

The product can be built in living quarters. For this, cardboard and fabric are used. The frame is made of PVC pipes, wooden parts. Even an ordinary table can become a frame. The kids love this play area too.

(18 ratings, average: 4,28 out of 5)

It's no secret that babies don't need much to be happy. The flight of their childhood imagination makes it possible to turn any household item into a spaceship or a car, so it is easy to imagine the delight of a child who has received a wooden playhouse built in the country.

The best choice would be a children's house, specially designed for a boy or girl. Owning such a dwelling of his own, a child with great desire will leave the city, knowing that a cozy corner awaits him at the dacha. In addition, this will help parents to take up dacha farming, without being distracted by the unbearable behavior of a bored child.

Nowadays, you can easily buy a ready-made house by contacting a company that builds compact wooden houses. Specialists will be happy not only to select the design, but will be engaged in the delivery and assembly of the house. These products are usually good quality, but the cost of work sometimes scares off buyers.

On the other hand, a wooden house will cost much less if you build it yourself. What is needed in order to build a children's house in the country? In this case, you will need to purchase Supplies and essential tool. Spending two days off, with your own hands it is quite possible to build a small house for your favorite offspring.

Do-it-yourself house for children: the advantages of wooden houses

The procedure for building a children's house in the country with their own hands

First of all, you need to clarify what plan the future house will be, decide on his appearance . For this purpose, a schematic drawing is first sketched out, which allows you to determine the type of building.

Characteristics of a child country house, which must be determined before starting construction works:

Development of a plan for a children's playhouse made of wood

Initially, drafting is required detailed plan construction work, and sketches and drawings. It is important to take into account the specifics of the future structure:

The distance between the floor and the ceiling should be at least one and a half meters. However, it is undesirable to make the room too high.
Will right decision install at least two windows. Firstly, such a measure will provide sufficient lighting in the room of the house. Secondly, you need to remember about the safety of children, who need constant supervision. Children can be monitored through the windows.
The door is recommended to be made to the level of the ceiling. So the child will definitely not fill himself with a bump on his forehead, besides, it is possible that adults will someday have to visit the baby.
In order to avoid unnecessary injury, all walls on the inside and outside must be smooth.
It is better to make a sloping roof, because a flat one can attract children, and sooner or later they will perch on the roof, which will create a traumatic situation.

Tools and materials for construction

Before you start building a small country house for children, you need purchase the following tools:

List of materials that will be required for the construction process:

Wooden beam for frame house. Builders recommend using a beam with a cross section of 50X50.
Sheathing lumber. You should choose plywood, the thickness of which does not exceed 10 mm. Oriented strand boards are also used. They are cheaper than plywood, but more durable. Everything is at the discretion of the owners.
Roofing material.
Bricks.
Glasses for window frames. It should be borne in mind that glass is not safe for a child, therefore, if there is a desire to increase the access of light to the house, then it is better to install plastic windows.

How to make a children's house: construction technology

Foundation and floor

By analogy with construction big houses, children's playhouses start building from laying the foundation. As a base, you can use earth, gravel, cement or crushed stone.

Exists different variants suitable for laying wooden boards. Some take off upper layer soil, they are covered with rubble from above, the site is leveled, and then support bars are laid on the site. You can do it differently: each corner of the building must be paved on a special concrete block, and the supports are placed on a sand cushion. Thus, the corners of the building will be placed at a depth of up to half a meter. The earth from the recesses must be removed, and a mixture of sand and gravel is poured into them. Then the holes are carefully compacted.

Blocks are installed on the prepared places, which should be on the same level. So that the frame is not crooked, you should use building level.

Without a waterproofing layer, the house will not be able to stand for many years. Most often, roofing material or modern bitumen-polymer mastic acts as an insulator. Some prefer natural ventilation. In this case little house built on metal rods or brick pillars no more than 20 cm high.

Walls

Having dealt with the foundation and floor, you can proceed to the installation of walls. To make walls, it is necessary to construct a frame from beams, which in the next steps are connected to thin sheathing boards or shields. Don't forget doors and windows. The first step should be to install a beam in each corner, the section of which, as a rule, is 50X50, and length - three meters. The product is cut into three equal parts or in half. Then the bars are attached under the door and window frames.

To fix the main bar, it is nailed to the floor with nails. The main thing is that then these nails can be easily pulled out. This measure is explained by the fact that ensuring a strong connection of building units is possible only with the help of special mounting corners, which are installed later.

Between the rafters, auxiliary struts are installed without fail, which act as fasteners. Keep in mind that the bars are connected from above by a frame that acts as the basis for roofing. After the base for the walls is prepared, the nails are pulled out, and in their place mount metal corners . The playhouse will stand firmly and will not fall apart only when all corners and joints are fastened with corner fasteners.

Bars installed in horizontal plane, note window openings and a door. Their height is calculated in advance. Calculations are based on the width of the cladding board. Such dimensions should be laid down so that during sheathing work there is no need to cut the boards according to their width or hide half the frame. In short, you need to figure out how many solid boards can fit into the remaining lower and upper opening. At this level, horizontal braces should be fixed.

Roof

The roof of a small do-it-yourself playhouse can be high and sloping. The design of the roof depends on personal preference. Classic performance requires the following algorithm of actions:

Sheathing and decoration of the house

The final stage of construction includes the sheathing and design of the structure. To create walls, lining, shields or wooden planks. Lining will allow reduce upholstery time, since there is no need to fit elements that fit together without problems. Since the task was to make a children's house, it would not be superfluous to decorate it with colorful drawings. Children themselves can be involved in the creative process. Windows can be decorated carved platbands, which are bought separately, or are made by hand.

Inside small house they make a bench and a table, but, of course, these are not the only interior items that can decorate a room. A small porch will give the house a more noble look.

The main thing is that the constructed play structure does not pose a danger to the health of the child. We are talking about the proper fastening of the elements of a wooden structure. It is important that children do not get hurt or scratched during outdoor games. Boards must be carefully cut, and apply a protective layer of some paint and varnish substance.

Self-tapping screws, nails and metal staples should not stick out and stick out, they are closed with special plugs.

Considering that it is advisable to build a playhouse in the country with your own hands only if the child spends on suburban area all summer, you are deeply mistaken. Even if you take the kids out of town only for the weekend, they need something to do in the backyard. Therefore, it is necessary to build a house - the children will have a place to play, and they will always be supervised.

If the family has a child, and even more so not one, it is necessary to build some kind of children's structure on a suburban area. It can be a swing or a sports complex. But a more amazing and enjoyable place for children to entertain can be a do-it-yourself playhouse - this is a kind of separate room, a personal space where kids can play or do drawing, singing, any kind of creativity.

At the same time, being protected from rain, wind and sun, children will be able to spend much more time outdoors. fresh air. Such a design can be with a window, a door and a small porch, it can be decorated with carved wooden details or a hedge of shrubs, flowers, as well as planting a small tree nearby.

How to make a playhouse for children in a suburban area is described in detail in this material.

Do-it-yourself materials for building a children's play house

Before you make a playhouse with your own hands, you need to prepare the following materials:

6 plank panels measuring 1.8 x 2.4 m with 5 x 7 cm posts for walls, floor and roof;
1 beam 2.4 m long and 2.5 X 7.5 cm;
1 beam 2.4 m long and 5 x 7.5 cm in section;
4 beams 2.4 m long and 5 × 10 cm in section;
4 processed beams 1.8 m long and 10 x 10 cm in section;
1 roll of roofing felt;
2 boxes of 500 g screws 30 mm long;
1 box of screws 75mm long;
1 box of roofing nails;
thin boards for decoration.
10-12 liters of stain (color optional).

Bars with a length of 2.4 m and a section of 5 x 7.5 cm are used for racks. They are the basis for plank panels, and wooden planks of sheathing are attached to them.

To build a children's playhouse with your own hands, you will need several tools that are in almost every home: a long level, a hammer, a breadboard knife, a drill driver, a circular saw, a chipper, a shovel, a tamper and a paint brush. Since the structural panels are quite heavy, you may need an assistant to carry and install them.

Before you make a playhouse, you need to choose a suitable place for it. The structure should not interfere with movement around the site, but at the same time there should be enough space around it for children to play.

Foundation for a children's playhouse

Under the foundation of a do-it-yourself playhouse for children, it is necessary to dig small trenches and fill them with rubble. Then you need to attach a beam 5 x 7.5 cm and a length of 2.4 m to one panel and mark on it the location of the panel racks. These marks will then help to correctly decompose the logs from the 10 X 10 cm timber.

Then, support bars with a section of 10 x 10 cm should be laid in the prepared trenches. It is important to place them so that during assembly they are exactly under the racks of the plank panels. First, the front support bar is laid, and then the rear. After checking the horizontalness of both bars, two central bars are laid.

After that, the support bars must be fastened together by placing two pressed beams across them with a section of 5 X 10 and a length of 2.4 m. They must pass between the racks of the plank panel, which will later be the floor. As shown in the photo, when building a playhouse with your own hands, it is better to fasten all the foundation bars with screws:

The voids between the lags must be filled with soil. It is very important to make sure that the support bars are above the ground. This will provide ventilation under the floor and protect it from rotting.

We build a house for children to play with their own hands: floor, windows and doors

For the floor, you need to choose the highest quality panel. It must be laid horizontally, so that it does not touch the ground. For convenience, under it, you can put trimming timber. The panel posts should be on top, and the timber trimmings should be under the panel between the extreme posts. After that, using circular saw you need to make a cut along the two extreme racks. Cuts must be made with inside panels so that there are no chips on the outside.

Then you need to lay the flooring on the foundation without fixing it. Its edges should coincide with the support bars. After that, you should adjust the front and rear panels to the dimensions of the deck. The height of the panels of a do-it-yourself wooden playhouse can be 1.8 m (and less or more if desired). It is necessary to mark the cut lines with the help of a chipping, while leaving a small margin for the width of the front and rear panels, so that later the racks of the side panels can be covered.

To get an overlap, you need to measure a distance from the outer edges of the extreme racks equal to the thickness of the racks (about 2 cm), mark the border with a beating and saw the panel from the inside.

Then you need to mark the upper central points on the front and rear panels, make marks on the side faces at a height of 1.5 m, draw two lines through these points and cut the panel along them.

After that, you need to mark the height of the side panels so that it corresponds to the height at which the lower points on the front and rear panels are (1.5 m). With the help of the beating, markings are made with a margin for the width of the side panels more than the front and back - about 5.5 cm.

The stock is needed in order to close the corners. Then, also with an allowance, the marking lines for the width of the side panels are beaten off and the panel is sawn from the inside.

In order to cut the panels for the roof, you first need to unscrew all the posts of the last panel, and at the end re-attach them into place. On the front panel, measure the length of the line connecting the central upper point with the side one, located slightly lower.

This distance will show where the roof panel posts will be. A stand should run along the ridge at a distance of 5 cm from the center line. Such an allowance is necessary so that during installation the two racks do not overlap one another. If necessary, you can build additional racks of bars with a section of 5 x 7.5 cm.

Pay attention to the photo - when laying the crossbars of the children's playhouse with your own hands, it is important to make sure that they are perpendicular to the roof ridge:

To do this, they must be exactly aligned with the bottom edge of the panel. If there are bumps along the ridge, the skate will hide them.

Then you need to take turns, one by one, remove and rearrange the racks so that the structure becomes rigid.

When all the posts are in the desired position, use a bevel to determine and mark the center of the roof panel, and then cut it into two equal parts.

The optimal door size for a children's playhouse is 60 x 120 cm, this will allow you to accurately place it between the panel posts. If desired, the finished door can be decorated to your liking.

On the front panel, the contours of the window and door are marked with the help of a beating. First of all, the window is completely sawn out, and the door should not be cut out to the end so that the panel does not lose its rigidity, otherwise it will be difficult to mount it.

All prepared structural details must be coated with stain, and then with varnish. In order for the do-it-yourself playhouse for children to last longer, all panels and the floor must be varnished on both sides.

Children's playhouse in the country: do-it-yourself panel installation

When the varnish is dry, you can start installing the panels. First, the flooring should be fixed using screws 75 mm long for this. They should pass through the posts of the bottom panel and lock into the support bars. Then a 5 X 10 cm board is screwed to the side of the base so that it protrudes beyond the edge to which the first wall will adjoin.

The back wall of a do-it-yourself children's playhouse for a summer residence is installed in its place and screwed to the free end of the board fixed to the base.

At the same time, it is important to ensure that the first wall is absolutely even, because all other walls will be aligned along it. The wall must also be screwed to the floor using screws 75 mm long. To make the playhouse strong for the child, screw the screws into the bottom of the wall so that they pass through the posts and lock into the support bars.

To simplify the work, the holes for the screws can be pre-drilled.

Then the side walls are installed and fixed, and at the end the front one is mounted.

After that, you can completely cut out the doorway in the front panel and fix it in the structure, and then install the door.

Do-it-yourself installation of the roof of a children's playhouse made of wood

To make the roof of a playhouse for children with your own hands, you first need to lift and install one half of the roof in place and attach it with screws and a drill driver. The screws must pass through the top panel trim and engage in the front and rear walls. Then the second half of the roof is installed in the same way.

After that, the gap between the two roof panels must be sealed. wooden block, fixing it in the middle of the gap. The same bars must be attached to the top of the front and back walls. The top edges of all three bars should be exactly in line with the roof ridge.

To make the skate of a playhouse for children with your own hands, you will need two boards, which need to be cut along one of their long sides at the right angle, so that after fixing over the gap they come together closely. Then all the details are screwed. After that, you need to cut the roofing into strips of the desired length, making a small allowance. First, the lower strips are fixed on the roof. They should be nailed to the boards roof panels 20 cm above the bottom edge.

You need to level the stripes of a children's playhouse made of wood, built by yourself, according to leading edge roofs so that the excess roofing felt (if any) is behind the house. Then you need to lay the central strip of roofing and nail it 5 cm below the ridge and 10 cm above the lower edges of the roof.

Do not be afraid if wrinkles form on the roofing sheet - in a few days they will straighten out under the influence of sunlight.

Porch and shutters of the playhouse for children

The porch and shutters serve as a decoration for a do-it-yourself playhouse. On the porch, you can place racks and railings that will enclose front door and at the same time serve as a support for a slightly protruding part of the roof. First, the floor is paved on the porch, then the racks are installed, and the railing is fixed on them.

The porch can be of any shape - square, rectangular or even round - but in any case, it will give the house a finished look and make it cozy.

Shutters will also greatly decorate a do-it-yourself children's playhouse, but in addition, they will help to hide the uneven and sharp sidewalls of the windows. Each shutter should consist of 2 boards 60 cm long and 2 boards 20 cm long. Like all other structural details, the shutters must be stained before installation.

A ready-made children's playhouse can be equipped inside with children's furniture, curtains, pictures, and decorated outside decorative flowerpots with flowers or figures of animals, gnomes or other fairy-tale characters.

The first long plank is fixed with a clamp along the window border, while it should protrude slightly beyond the upper and lower edges of the opening at the same distance. After that, inside the house, it is necessary to drill pilot holes for attaching the shutter boards.

This is necessary so that when the screws are screwed in, the boards do not split. Then screws are screwed into the guide holes, fastening the first board of the shutter. The adjacent plank is also mounted. On top of each shutter, two small boards are attached, which perform an exclusively decorative function. They can be screwed on from the outside, having also pre-drilled pilot holes.

These photos show do-it-yourself playhouses for children:

Admit it, in your childhood you watched films with bated breath in which children had their own playhouse and dreamed of the same. But now you have a chance to realize your dream, if not for yourself, then for your children. We have prepared a few for you. the best options children's playhouses and provided them with instructions for making.

Do-it-yourself house for children

But even if you need a more serious design - do not worry, everything is quite feasible. The main thing is to pick up good building materials and enlist male support.

The simplest and most versatile house

The period when a child gets excited about the idea of building his own home very often does not coincide with your plans, and often with the season: it is winter outside and a blizzard is blowing, and the little builder sits and is sad waiting for the heat to get to work as soon as possible.

In this case, pay attention to designs where the material of the walls is fabric. You don’t have to look for it for a long time, and after the games, the house is quite easy to assemble and fold compactly.

One of the ideas for a fabric house is a hut. It is especially good to build one by reading a book about the Indians or their followers with your child, for example, “Little Savages” by E. Seton-Thompson.

A hut can be built both at home and on the street. Thin tubes are suitable as supports, for example, PVC plumbing pipes are not at all expensive, but you can find something similar in home belongings. The main thing is to make sure that the supports do not move around the floor. If your hut is small, it is better to tie them to the base, which can be made from a hula hoop, or you can fasten several boards in the shape of a polygon.

Houses for children with fabric walls can be used not only for games, but also for teaching a child. After all, the baby does not always want to get ready, he is interested in the process of creation. Together with him, come up with options for decorating the walls from the inside and outside, if you bought the fabric specifically for this purpose - paint it with markers, make windows in it, sew different elements on top of it - it all depends on your imagination.
It will be interesting to read: and create a romantic atmosphere!

A more familiar house with four walls. At its base is a fairly large table.

Same pipes, same fabric...

The playhouses for children that we have reviewed are simple and good, but designed for young children. Nevertheless, there are more serious versions, they will need materials already familiar to us.

Simple and inexpensive: this playhouse is assembled from PVC pipes small size, parts used in the corners can be bought all in the same plumbing department of any hardware store.

Not a tree, but already close

Let's continue our mini-tour on the projects of children's playhouses with an option made from the easiest material to process - cardboard.

Almost every home has a large carton boxes, for example, from a refrigerator or TV, but even if not, it doesn’t matter, you can buy them with a margin in the same hardware store.

Here there is even more room for creativity, because the walls themselves already hold their shape, and indeed little child you can already give a glue stick and a large marker in your hands and invite him to the “construction site”.

If you are going to build a simple do-it-yourself house for children using cardboard as a building material, try to make it foldable, and if it is quite large, then modular. Determine the most convenient folds and reinforce them, for example thick cloth. A modular design can be made by bringing together several folding elements: a castle, a tunnel and a tower, which can be connected, disconnected and folded.

Essential elements cardboard house it is better to fasten with the help of grooves, it will be more convenient, and the structure will live longer.

House in the house

Creating a good playhouse for children is sometimes not at all easy, either. Especially if you want to organize one in your home and want to make it capital. The first idea that can greatly simplify your work is to think about whether it is possible to adapt some existing room or place for games?

Most often, parents turn into very cozy houses beds for their children. You can do this by own project, this design is quite simple. Just remember that the materials for it must be environmentally friendly, especially the paint.

In such a playhouse, it is worthwhile to provide for the possibility of removing the mattress from the bed, so as not to stain them in the gameplay.

Changing the bed in this way is a very creative process and depends on what the child is most interested in: boys usually need Pirates' ship, girls - a fabulous palace. Therefore, in its creation it is better not to use finished projects, and create one yourself. Whatever it is, don't make it too closed, leave enough room for air to circulate. Read here if you have one.

One of the best combination options: the bed is on a raised platform and does not get dirty, and the comfort of the playhouse is preserved.

Another option is to equip a place for games in a small room, such as a pantry.

A cozy playhouse for children under the stairs.

Like adults

Universal playhouses for kids are great, but a real plank shack that can withstand rain and snow will arouse much more interest in children. The only "but" is, of course, the place for its placement. But if you have a place to place it, it will not be difficult to build one.

Playhouse for kids in just 10 stages. It is built according to the usual scheme wooden gazebo. The walls can be made of chipboard panels, plywood or boards. So that children, playing in the house, do not catch a cold even in the autumn cold, they put it on a wooden podium 20-25 cm high.

When building such a house, keep in mind that children grow up very quickly, so it’s worth making it a little “for growth”.

Such a building does not experience large loads, so you can choose materials and design in a very wide range: construction difficulty will be equally small.

If there is space, almost any project of a house for children can be realized.

You can also go the other way and repeat finished structure according to drawings on the Internet, especially a lot of them are presented on English-language sites. You can find them by searching for children's playhouse blueprints.

Classics of the genre

Talking about houses for children and not remembering the blue dream of thousands of children - a tree house, of course, is impossible.

We note right away that it is more difficult to build a good treehouse than an ordinary one. Firstly, it is necessary to take care of the safety of children, because even a fall from a small height can result in a severe bruise, or even a fracture.

Tree house combined with a small sports ground.

On the other hand, this good way unobtrusively take care of the safety of children who are already climbing trees: by controlling every detail on your own, you will be calm for your children, and they will have the opportunity to play the way they are interested.

Construction in each case is very individual and depends on what kind of wood is available, the age of the children, and, of course, the wishes of the children themselves.

Please note: in the construction of such a house, it is better to use additional supports that will remove part of the load from the tree trunk, and it is also better to use as little metal fasteners as possible. Nails and self-tapping screws screwed into the branches and trunk harm the tree.

Whichever option you choose, remember that a do-it-yourself house for children is not at all difficult, and most importantly, its creation can be turned into exciting game. Build and you will succeed!

Children's houses designed for children aged 1 to 5 and older, when the child already knows how to crawl or walk confidently. There are such types: with a slide, folding, inflatable, with a pipe. Most types can be installed in the summer both in the apartment and in the country. All tents are made of plastic, some have fabric. When choosing, pay attention to the game elements and the size of the house.

With a slide - a children's playhouse can be equipped with a slide, installed on the street and in the house.
Folding - balls are also attached to such models. Quickly assembled by one person in a couple of movements. Suitable for an apartment.
Inflatable - their advantage is simple storage and quick assembly, the pump is supplied.
With a pipe - a house for children, which comes complete with a climbing tunnel.

The size s: each playhouse can be installed indoors. Medium models have dimensions of 100x100x135; complex models with several rooms in length up to 2 meters.

Material and quality: children's playhouses are made of plastic, the shapes are rounded, there is nothing to cut yourself on. Some models are made of fabric (breathable material) or have such inserts. There is no specific smell.

Type and purpose: game developing houses designed for passive and active recreation in the country and at home.

Assembly: all models have simple and robust design Everything in the houses is stable. One person can assemble the tent on their own, following the enclosed instructions. Folding models allow you to assemble in a couple of simple movements.

Design: Features colorful designs, themed looks for babies, boys and girls. Castle-inspired tents and cabins, gardener's dwellings, as well as models with combined structures are available.

game elements: all play houses, some with plastic balls, tunnels, slides, most have windows, pots and musical items.

Price: you can buy a simple tent in the range from 700 to 1,500 rubles, or a multifunctional house for 1,600-30,999 rubles.