Residential ventilation system - this is one of the most important Systems communications. It does not just provide normal and comfortable lifeBut also has a direct impact on the health of people. Kitchen hood is one of the ventilation tools, which is designed to provide a comfortable stay in the house. The effectiveness of its work will be directly dependent on how correct it is installed.
Functional Exhaust Load
This is, first of all, a mandatory attribute of competently equipped kitchen. Her constructive feature It is that the composition includes a corrugated sleeve, which connects the hill of the exhaust at the exit with the ventilation shaft.
Extracts are usually either from smooth plastic or corrugated (from semi-rigid aluminum).
The thought on how to hide the pipe or disguise it is relevant for each owner and one of the tasks of the interior design.
I would like to make the cuisine to make a contradiction with the need for this attribute of security and comfort in the kitchen. To date, several options for resolving this problem are presented, in which to hide the corrugation from the exhaust can be without prejudice to the entire kitchen interior.
Decor options
One way to solve this issue is to install the embedded furniture. This option assumes that the installation will be carried out in a high mounted cabinet, located to the ceiling above gas stove. Thus, the corrugation will be inside this locker.
The second method also involves the option to do without corrugations in the kitchen. In this case, install kitchen hoodworking on recycling type. This means that the air is cleaned, thanks to two types of filters (catching fat and coal), and then fresh air Returns to the room. Consequently, there is no need to remove polluted air into ventilation and in the use of corrugations.
But such options are quite expensive, since both embedded furniture and special equipment are not suiced. Therefore, options suggesting the "campaign" of the kitchen exhaust.
Suspended lockers
First, you can install the equipment in the suspended locker. If such lockers are somewhat along the whole wall, it will be the best option in terms of room design. In this case, in one of them a corrugated sleeve with the most exhaust, and the rest can be used in direct, intended purpose.
This technique can be beat local lighting Over a cutting table and over washing. It turns out that the corrugation will be hidden, and lighting in the kitchen will become more interesting and brighter.
Dancer from plasterboard
Secondly, there is an option to hide corrugated sleeves in a special plasterboard box, acting as an element of decor. This option will be especially successful if it is planned to make a drywall suspended ceiling. It can be said that almost the ceiling with two levels is practically.
If you decide to stay at this option, you need to discuss this question in advance with the workers in installing the ceiling. They will appreciate the situation and prompt how the best way Locate the hood so that it is hidden under the ceiling.
Maybe there will be no need to lower the entire ceiling below the entire ceiling, but just enough, to make one part of the ceiling below. If additional highlighting is used at different levels, it will be quite unusual. The same tips are applicable for the stretch ceiling. The Installation Master of this ceiling will also be able to prompt individual options, one of which is necessarily suitable.
Plastic box
Thirdly, there is an option for closing the corrugation by a plastic box. Currently, such boxes are found in any color execution, various shapesEquipped with embedded (point) lamps as an element of decor.
The plastic box is suitable only if the exhaust itself is located as close as possible to the exhaust channel, while there is no large number of direct corners. Otherwise, the installation of a plastic box will negatively affect air outflows.
Corrugation as a design element
Finally, a pipe decoration option is offered decorative elementsAs a result, the corrugation will turn from the design element to an unusual interior part. This option is suitable for creative people With a rich fantasy. The easiest option in this method is painting in a wallpapers.
There are firms offering hood kits + pipe. This is the most suitable optionSince its elements are made in one color and there is no need for "disguise". In addition, when buying, it is necessary to choose only products from high-quality materials so that in the future do not regret the consequences.
Video
As already mentioned above, for proper work Equipment has a big role playing its installation. This video footage will help you correctly set the hood.
Flowing extract B. short time Can cope with contaminated air in the kitchen. However for successful work Such a device is required to connect to the ventilation network at home. You can connect the exhaust with a corrugated or plastic pipe, but the additional equipment negatively affects the appearance. kitchen room. How to hide a hood and a pipe connecting the device with ventilation, read further.
Possible disguise methods. Their advantages and disadvantages
To close the pipe connecting the hood from the room, you can use in one of the following ways:
- hide the pipe under the stretch ceiling or suspended. This method Allows you to fully hide the connecting pipes, which is a significant advantage. However, the ceiling level will have to lower the level of work, which will largely reduce the useful area of \u200b\u200bthe room, as well as call the wizards, as it is impossible to carry out the web of the canvas without special equipment and certain skills;
Hide ventilation pipes under stretched web You can only with the height of the ceilings in the room more than 2 m 60 cm.
- close the system with a decorative box, which can be made of wood, metal (most often used stainless steel) or plasterboard with subsequent painting or finishing plastic panels. The box can be made and install yourself. This work can be performed even novice masters. To give individuality to it, you can insert additional lamps or LED tape;
- install additional lockers of embedded furniture. Additional cabinets can be ordered in a specialized organization or make independently. In addition to the ability to hide the pipes when choosing this method Additional storage space for kitchenware appear;
- painting the corrugation pipe into any color corresponding to the decoration finish, and thereby make it a separate interior item. This method is the least expensive and fastest. But it should be noted that the possibility of using paint is available only when finishing the kitchen in the styles of Modern or Haitete.
What is the way to choose? Solve each user independently based on personal preferences.
How to make a box yourself
So, the easiest and most reliable way to hide the hood in the kitchen is the manufacture and installation of the box. Work is performed in several stages:
- preparation
- installation.
Preparation for the manufacture of box
In progress preparatory work Need:
- develop a sketch of the future design and determine its dimensions for counting need quantity materials;
- purchase materials for work;
- prepare tools.
The size of the box design is determined in accordance with the diameter of the exhaust pipe and the distance from the exhaust to the connection site with the ventilation system.
For the manufacture of a box of plasterboard or wood, you will need:
- metal guides for frame or wooden bars;
- plasterboard (woodcrew, veneer and other selected materials);
- finishing materials (wallpaper, paint, decorative panels etc);
- fasteners (dowels, selflessness, clamps in order to fix the air duct).
From the tools will be required:
- roulette, construction level, marker;
- drill and perforator;
- screwdriver;
- lobzik;
- a hammer.
Production and installation of the box
Work on the manufacture and removal of drawing into the cabinet is performed in the following order:
- marking. At the initial stage, it is necessary to determine the location of the guide frame and the locations of their mounting to the wall and the ceiling;
- mounting frame frame. The manufacture of the frame begins with the installation of horizontal guides and only after they are installed, you can start the mounting of vertical cuts;
- fastening the duct;
To eliminate noise while the exhaust and ventilation network is operating, the space between the connecting pipe and the cable lining can be fill in mineral Vata. or any other insulation.
- frame covering selected material;
- conducting decorative finishes.
Process independent manufacture Boxes for ventilation from plasterboard are presented on video.
For a similar scheme, you can hide the pipes of water, sewer or in any room.
Hello, dear reader! Today we will talk about how to hide the pipe from drawing in the kitchen.
We will talk about the ways to mask the air ducts used by the materials, consider how to decorate the hood with your own hands, we will give the advice of specialists, we will analyze errors when conducting mounting work. You will learn and see examples of the most practical designs.
Kitchen hoods are two types.
Circulation hoods that purify air with a filter and return to the room. Do not require connection to the ventilation miner of the building, respectively, they do not need an air duct and disguise nothing.
Flowing hoods that remove polluted air from the kitchen. They purify much more efficient, but require connecting to the ventilation system through a corrugated sleeve, which has an unattractive view that does not adorcate the interior of the kitchen. In addition, if the ventilation shaft is located on the other side of the kitchen, the duct length can be several meters. Therefore, the question of hiding the exhaust pipe occurs simultaneously with the process of installing the entire system.
Ways to mask pipes
Instead of corrugations, you can use the plastic pipe round or rectangular cross sectionsuitable for the diameter of the channel. For connecting short segments, adapters of various configurations are used. The minus of the plastic pipeline is the loss of thrust when it is long. Therefore, use such plastic box It is recommended only if there is a vent hole next to the hood.
It is possible to decorate the corrugated sleeves in the following ways.
- Gypsum box. Constructed on a frame of metal profiles and then painted in color corresponding to the kitchen design.
- Embedded furniture. The air duct is noticeably placed in the walls of the high hinged cabinetsuspended above the stove. This option will suit In the case of built-in hood fixed in the lower part of such a cabinet.
Both options can be played with lighting from LED elements, which will add comfort and brightness of lighting in the kitchen.
- Eaves kitchen headset. The exhaust pipe is passed close to the wall at the top kitchen furnitureand it becomes closed behind the cornice.
- Suspended or stretty ceiling. In this case, the corrugated tube will be completely hidden. The ceiling height will lose from 13 to 15 cm.
- Decorative elements or painting corrugations, which will perform an element of the kitchen interior.
If your kitchen is decorated in high-tech style, aluminum corrugation can be left because there is, without disguise. She combines well with this style.
What is the better way
The most rational disguise option will be the one that is best suited for the interior of your kitchen.
The simplest way is the replacement of corrugations with a plastic duct. But it must be borne in mind that it is effective only in the cases of the arrangement of the stretch near the ventilation hole. In addition, the plastic box should fit into color design Kitchen. Otherwise, it will have to be painted or bold suitable wallpaper.
If the sleeve is long, extends through the entire room, then the best option will be suspended ceiling, allowing you to fully hide the exhaust pipe.
Most cheap will paint corrugations and separate it with simple decorative elements.
Perform work yourself or cause masters
To install a box of plastic or drywall, it makes no sense to resort to the services of the masters. You can do this work yourself.
If you have to make a mounted or stretch ceiling, it is better to use the help of professionals.
Requirements for pipe sealing materials
Materials for masking pipes can be metal, plastic, wood and plasterboard.
Designs that hide ducts and other communications serve not only for decorative purposes, but also reduce the noise of the exhaust motor. They should aesthetically look, possess high resistance to elevated temperatures and moisture, chemical impacts, ultraviolet, easy to lean care, cleaning from dust and other contaminants.
Plastic is quick and easily going, it is well processed, easy by weight. Its disadvantages are sweating over time, exposure to mechanical effects.
Stainless steel boxes are distinguished by a special design, reliable in strength, do not change the appearance. The minuses include heavy weight Designs, bulky and high price.
Gypsum Carton has gained great popularity as finishing material. It is available at a price, convenient when installing, which allows you to collect designs from it yourself, without attracting masters. The box from GCL can be painted, put off, separate with wallpaper, tiles, mosaic. When installing, the fragility of the material should be taken into account.
A tree with good processing will be harmoniously combined with the facade of the kitchen wooden headset, securing and protective functions.
Disguise pipes with your own hands
Installing decorative boxes can be made with your own hands, not even possessing big skills homemade Masters. It is important to decide in advance to decide on the trim option, pick up need material and fasteners.
Required tools and materials
The following set will be needed from the tools:
- electric drill;
- screwdriver;
- perforator;
- scissors for working with metal;
- to work with wood and plasterboard - electrolovik;
- line;
- level.
For fasteners should be purchased:
- dowel required;
- self-tapping screw;
- metal profiles;
- fastening screws;
- clamps for fixing the duct.
Before buying materials, the design dimensions should be determined and calculated the purchase volume.
Stroke work
To hide the corrugations, the decorative box of plasterboard is most often built.
- Work starts with a space and air duct, an outline of the installation project.
- They produce with a ruler and level markup with a pencil on the wall. Along the wall, and then on the ceiling, you attach a dowel guide profiles, then the vertical segments are fixed to them.
- The sleeves of the corrugations are fixed in the holes of the hood and the ventilation mines, placing inside the frame.
- According to profiles, we are cutting with a frame of plasterboard using a screws.
- The manufactured box can be frozen in accordance with the kitchen interior: paint, shook with wallpaper, use other materials.
Consider some nuances of the masking of the exhaust pipe.
When choosing a plastic duct, it is important to provide that its diameter is not less than the diameter of the ventilation mine hole.
Plastic sleeve with a length of over 3 meters - not the best solution.
Additional neon lights Really transform kitchen space. It will help make the protrusion of the box with inconspicuous, or, on the contrary, highlight it in the kitchen facade.
If the opening of the ventilation shaft is located away from the exhaust, the sleeve can be rotated and paved through the side wall of the next attached locker.
How to mask heating risers
Mask the risers of heating in several ways.
Close up of pipes in the wall or floor. The method of time-consuming, but the main disadvantage - when damaged the pipe or leakage, the wall or sex will have to be disassembled.
Hide pipes with a decorative drywall box. Place a place for fastening metal carcass Taking into account the fact that there should be at least 3 cm space between the pipe and the box. Fasten the frame with horizontal jumpers. Then they cover it with sheets of GLC. The jokes are punctured by sickle, spit, rub. Next, they are executed decorative materials Or stain in the tone of the room.
Similarly, you can disguise the sewage pipes, water supply pipes, and when compliance with the security measures - the gas pipeline.
The masking of such communications is better to spend during their gasket, which will allow installing the box to the greatest extent.
What is better than a plasterboard box or stretch ceiling?
The ceiling will completely hide the sleeve, it will not be visible. But if you have a ceiling below 2.60 in the kitchen, then the accommodation option of the air duct over suspended ceiling Excluded.
The plasterboard box only disguises the exhaust pipe, the protrusion will remain. But if the device fit into the interior, it will be enough.
Hinged ceiling, equipped with panels or ceiling tilesIf necessary, you can easily disassemble. Sometimes it is necessary to dismantle only part of the structure under the air duct.
How to install a hood corrugation
Corrugated ducts are soft, weightless aluminum products. Convenient in the installation, well bend at any angle.
During the installation, the corrugation is better to stretch so that the dirt is subsequently not accumulated in its ribbed surface.
The diameter of the sleeve should either coincide, or slightly exceed the size of the output hole at the exhaust. In this hole, a plastic cylinder with a check valve is installed.
The end of the corrugation is put on this cylinder and fasten the clamp. The other end of the corrugation is connected similarly to ventilation hole Through a special air duct. Include a hood, apply a sheet of paper to it. If the paper keeps, then there is a craving.
Frequent errors
Most often make mistakes when installing corrugations or plastic duct. So, for mounting plastic or corrugated pipe It is important that its cross-section coincides or exceeded the size of the air purifier outpatter. When buying sleeves and exhaust equipment, you should pay attention to it.
Corrugated pipe must be installed as stretched as possible, which is not always complied. Its bends should not be less than the corrugation itself.
When laying a plastic pipeline, the corners of the bends should be stupid.
Work examples
Examples of work are shown in the following photos.
Mounting frame for box:
Installing drywall box:
Masking corrugations in a mounted cabinet:
Cleans the air in the kitchen from evaporation, smoke and smells in the cooking process. Therefore, no doubt, this device is an important element. modern kitchen. Buying headsets should be disturbed in advance how to hide the pipe from drawing in the kitchen. Corrugation should not spoil appearance Kitchen headset and interior. If you do not think about how to disguise the corrugation, then certain difficulties may occur during the installation.
To date, only two types of kitchen hoods can be purchased in the sales market:
- circulating;
- flowing.
Circulating hoods fit into any interior, because they are made in a wide variety. They differ in color, shape and size. However, such ventilation systems require complex care, due to the regular need to replace filters. In flow hoods, everything is much easier. Here the air is displayed in the air duct ventilation mine. In circulation exhaust systems, air is cleaned with filters.
Installation flowing erasek It is complicated by the fact that they need to be combined through the air duct with the ventilation shaft. The trouble is that the hood and ventilation shaft are usually located on different Walls. How to set a hood in the kitchen so as not to spoil the interior of this room?
One of the options how to close the air duct is to sew it into plasterboard. To do this, you need to make a crate in the size of the pipe. It can be made of metal box. The lamp is trimmed with plasterboard. The finished box must be fixed to the ceiling / wall. It can be any form. This option is most successful if you plan to do in the kitchen suspension plasterboard ceiling, called two-level.
If you want the box to merge with the walls, then cut it with the same material as the adjacent wall of the kitchen.
Another option is to hide the corrugation from the drawing in the stretch ceiling. In this case, the pipe is located above the stretch ceiling and it is quite unclear. Most the best way, at first sight. But what if there are problems in the operation of the air duct? Note that it will be impossible to get to it without disassembling the ceiling. And this, let me notice, unnecessary financial and temporary costs. And besides, you will not be able to restore the ceiling yourself. And this, in turn, means that it will have to re-invite specialists to install stretch ceilings.
Another option is to use a plastic tube instead of corrugations. They can have a rectangular or rounded form. The second more effective than, the first. They have a smaller air resistance. Nevertheless, rectangular pipes fit significantly in modern interior. Below are some advantages. plastic pipes:
- they do not climb from dirt or fat, in contrast to their corrugated analogues;
- they can be painted on any necessary color and even shine with wallpaper on the walls;
- have increased noise insulation.
When installing plastic pipes for drawing, consider the quality of the ventilation system in the house. If it is not enough powerful, then the cross sections of the pipes may not be enough for good operation of the air duct.
To ventilation system The kitchen worked properly, the norms of distance from the hood to the plate should be observed. For example, for electric stove - It is 70 cm, and for gas - 80 cm. This precautionary measure is due to the fact that a layer of fat often accumulates on the surface of the drawing, which is quickly flammable under the influence of elevated temperatures.
Video
In this video, it is described how you can hide ventilation and exhaust pipes:
July 26, 2016
Specialization: finishing facades, interior decoration, construction of cottages, garages. Experience and gardener and gardener experience. There is also experience in repairing cars and motorcycles. Hobbies: the game is not a guitar and a lot more, to which there is not enough time :)
Any pipeline is usually spoiled by the interior design, so many people wonder how to hide communication systems in the kitchen. There are several ways to solve this problem, and the choice depends, first of all, from the type of pipeline. Therefore, let us consider in detail all the ways as in the kitchen to hide the pipes.
Hide pipes
As mentioned above, the largest number of communications at home is concentrated in the kitchen, this is:
- cold and hot water water supply;
- gas pipeline;
- heating pipes;
- sewerage
- air ducts and chimneys.
If all these communications hide, the interior will be much more harmonious and attractiveEven if it is quite simple and "inexpensive."
- when the shoes are ready, they must be cleaned of dust and put in them pipes. To fix the latter, you can use brackets and brackets;
- after assembling the pipeline, its performance must be checked. This allows you to directly leak if there are assembly defects;
- next, thermal insulation covers are put on pipes;
- at the end of operation, the shoes are close to cement mortar.
I must say that hidden mounting contains a number of rules that must be observed:
- only a new pipeline can be latched. Therefore, do not try to climb old pipes;
- if the pipeline is plastic and is designed for hot water supply or heating, it is necessary to provide compensators. For example, the temperature expansion of the polypropylene pipeline can reach 5 mm per mongon meter;
- all detachable fittings should be free access.
By the same principle you can hide and sewer pipes. The only thing to do is more difficult in the sense that the shorters for them should be very wide and deep.
Gas pipeline and other types of pipelines
Many people are interested - it is possible to hide gas pipe in the kitchen? It is prohibited to change its location, climb into the wall or perform other acts with the pipe. However, this does not mean that the gas pipeline cannot be hidden.
You can solve the problem in several ways:
- installation of the box;
- installation of cabinets;
- decoration.
The most common way to hide the gas pipeline, as well as other communications, starting from the heat pipe, and ending with the air ducts and chims is the installation of a drywall box around them.
For its arrangement, the following materials will be needed:
- metal profiles for drywall;
- himself plasterboard;
- putty and self-adhesive grid.
I must say that you can shelter the box and other materials, for example, plywood chipboard or plastic, however, it is easier to work with drywall.
The instruction on the installation of the box is as follows:
- first of all, you need to collect a box of metal profile. If you are going to hide the riser, then the construction is based on the stands that are connected by jumpers, while the guides are mounted on the floor and the ceiling. For horizontal wiring, the same frame is used, but located horizontally, while two guide profiles are attached on the floor as shown in the diagram above.
To fix profiles to the wall, you should use a dowel-nail. The most important thing at the frame assembly stage is to correctly arrange the racks so that they are parallel to each other, and the box itself was perpendicular to the wall and the floor; - then the frame is trimmed with drywall using screws;
- at the end of work, you need to cut the chamfer from the edges of the plasterboard, stick on them the reinforcing grid and then shap the surface. On our portal you can find detailed information about plasterboard spitting.
A simple way to hide the pipe from drawing in the kitchen is to arrange it on the wall, over the mounted cabinets.
This option is suitable for plastic rectangular air ducts.
The simplest I. fast way Hide communications - purchase cabinets with missing rear walls. They may be located water supply and sewage. In places where the pipeline goes beyond the pipes, the borders located between the worktop and the wall can be made.
Truth, this option is the most expensive, as you have to order new furniturewhose price is very high. The only thing to save, you can independently make small lockers, like, for example, in the photo. To do this, use laminated MDF or chipboard.
The design of the cabinet itself is extremely simple - it consists of two sidewalls and anterior door. This solution is convenient to ensure easy access to ball valves and other fittings.
There is another one, a much cheaper way to hide a gas pipe in the kitchen or, for example, a heating is to decorate it. Since this approach is creative, you will have to show your fantasy a little, but the result can exceed all the expectations.
As an example, I will give a few simple options Decoring:
- if you need to hide the riser, you can paint in white color And in places to apply black strokes, thereby imitating the trunk of birch;
- the pipe can be wrapped with a jute rope and continue to decorate to your taste, for example, hang up the baskets for flowers or put on it an artificial curly stalk of the plant;
- to decorate thin pipes, you can use bamboo, split into two parts. It is put on as a casing and tightened with a rope;
- the image is often applied to the walls, while the pipe is painted, adjacent to the wall. In this case, it becomes completely imperceptible.
You can come up with other options for decorating, which will be well combined with your kitchen interior, or take the idea voiced and remake it on your own way. The main thing is that the pipe in the end becomes invisible, and at the same time the interior looked beautiful and harmoniously.
Here, perhaps, all the most successful, in my opinion, ways to hide communication in the kitchen.
Output
There are several ways to hide pipes in the kitchen. Some of them are quite complicated, and implies repair, others are extremely simple and not requiring financial costs. Therefore, it should be chosen based on your own preferences and, as already mentioned above, the peculiar features of the pipeline.
Additional information contains video in this article. If you have questions after reading the material, leave them in the comments, and I will gladly answer you.
July 26, 2016.If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!