Old kitchen set with plastic on top. Master class on how to renovate an old kitchen yourself. Painting kitchen facades

Any, even the highest quality and reliable kitchen furniture wears out over time and loses its attractiveness.

And to reduce the cost of a new kitchen set, the owners have to think about how to update the furniture in the kitchen with their own hands.

In fact, this task is not at all as difficult as it might seem at first glance. If you have really high-quality kitchen furniture installed, then you can extend its “life” almost indefinitely.

Yes and with modern models Furniture that is not designed to last can be dealt with - the main thing is not to give up and be creative.

Updating kitchen furniture

Approaches to updating a headset

Restoring a kitchen set is a fairly multifaceted task.

Approaches to its implementation depend on many parameters:

What condition is the furniture in?
What damage is there on it?
What do we want to get as a result?
What means, materials, and most importantly, what skills do we have?

Without answers to these questions, there is no point in starting repairs.

The easiest way to restore kitchen furniture is from natural wood. In general, the better quality the kitchen set was originally, the easier it is to restore it.
The more damaged the furniture is, the more money will have to be invested in restoring it. In some cases - especially when it comes to inexpensive sets based on MDF or chipboard - it is more rational to simply replace the furniture, since the cost of repairs will be close to the price of a new kitchen.
It's often easier to radically change your appearance kitchen furniture than to return it to its original state. Therefore, even if it seems to you that the kitchen cabinet or countertop is damaged beyond repair, do not despair - show your imagination and make yourself a completely new kitchen.

Decor instead of renovation

Before you start repairing kitchen furniture that has lost its original beauty, we advise you to think - maybe the repair can wait for now?

Indeed, today there are several ways to decorate kitchen furniture without radical alterations, while simply hiding the damage caused.

Therefore, if your kitchen set has lost its presentable appearance not as a result of wear and tear from old age, but simply due to pinpoint damage (scratches, chips, stains, etc.), you can use methods to disguise defects.

The first method is to use vinyl stickers. Modern industry offers enough wide choose stickers made of resistant polyvinyl chloride on an adhesive base. Such a sticker is simply applied to the damaged area on the kitchen facade or the back of a chair - and serves not only as a disguise, but also as an interior decoration.

Advice! It is necessary to carefully select stickers according to their appearance and color scheme– so that they look like a natural complement to the kitchen design.

The second method is decoupage (pasting furniture with decorative napkins). A special decoupage glue is applied to the damaged area, a thin napkin is placed on top of it, and on top - after the glue has dried - a layer of transparent acrylic varnish is applied. Decoupage is one of the most popular methods of decorating furniture, and allows you to create a unique, unlike anything else interior.

You can see examples of kitchen furniture updated using decoupage technology in the photo in this article.

Both of these methods will not only hide minor damage, but also save time and money spent on repairs.

Well, if the damage to the furniture is serious enough, well, you’ll have to start a full-fledged repair.

Kitchen furniture repair

Restoring kitchen furniture using self-adhesive film

The easiest way to update kitchen furniture is to cover it with self-adhesive vinyl film.

Most often, kitchen facades are updated in this way, but other pieces of furniture can also be covered with film - the main thing is that they do not experience serious operational load.

Advice! To update furniture, choose high-quality film, since cheap varieties of this material peel off from the base very quickly.

Below are the update instructions kitchen facades using film:

We remove the handles from the kitchen furniture, decorative overlays and other fittings that may interfere with gluing. We measure the surfaces that we will cover with film - the façade, sides, shelves, etc.
We cut out the film according to the dimensions obtained - to make the work easier, you can use the centimeter grid applied on the back surface of the roll as a guide. In places where the film is folded, leave an allowance of about 20 mm.
Before gluing the film, prepare the surfaces by thoroughly washing them with a damp sponge and a degreaser. The better we clean the surface, the more securely the decorative film will be applied.

Then we proceed to the actual pasting. Peeling off a few centimeters protective film, apply the decorative film to the surface and begin to smooth it, gradually removing the protective layer. For smoothing, you can use a special plastic squeegee, or you can simply use your palm - whatever is convenient for you.
If there is a small bubble under the film, you can try to “drive” it to the edge, or you can pierce it or carefully cut it.

Note! If the film is glued unevenly, it must be peeled off immediately (with a sharp movement), since after a few hours this will be much more difficult to do.

You can’t re-stick the peeled off film - it still won’t stick strong enough.

This method is one of the simplest and most accessible, since the price of the film used is low.

But the appearance of a kitchen updated in this way will not be the most attractive - that’s why other renovation methods are often used.

Painting kitchen facades

A more radical way is to paint facades and other elements of kitchen furniture.

This restoration method makes it possible to completely transform the kitchen - therefore it can be recommended not only when repairing furniture, but also when changing the style of the room as a whole.

Painting is quite simple:

We remove the facades from their hinges and dismantle the fittings. We disassemble the remaining pieces of furniture intended for painting to facilitate the painting work.
We thoroughly wipe all painted parts with a damp sponge, removing dust and dirt, and then degrease them.
Place the prepared parts on a work surface previously covered with plastic wrap.

Advice! All work related to painting and varnishing kitchen furniture should be carried out on outdoors or in a well-ventilated area.

Using a spray gun, apply a layer of primer to the furniture. Leave the primer to dry completely - this will take about an hour and a half.

When the primer has dried, we begin to apply the paint of the shade we have chosen (the painting procedure is shown in detail in the video). For painting, you can use a fairly wide brush, but it will be much easier and faster if we use a spray gun. Apply the paint in several thin layers, after each application, allowing time to dry.

In this way, in just a few hours you can get a completely new kitchen - one that fits perfectly into your home. new design!

It may seem that pens are an insignificant element and are not even worth talking about. But designers have a completely different opinion on this matter. They claim that it is small parts play a rather large role in the overall image - they give the furniture a finished look and emphasize the style. If the kitchen set is generally well preserved and not cracked, but the handles have become dull and peeling, then the kitchen interior will look sloppy.

That is why urgently replace your old pens with new ones! Now you can find a huge variety various options: these are modern staples too various colors, wooden, or transparent plastic.

Do you want to make your kitchen brighter? Buy colored pens; they will certainly add a fresh touch to the interior of the room. Experiment not only with the material, but also with the form. Now there is a huge choice various pens For furniture facades, for example, in the shape of animals or plants, which your child will simply be delighted with.

The range of door handles is so diverse that it can satisfy the needs of any, even the most demanding customer.

When going to the store for new fittings for kitchen cabinets, be sure to take as a sample old pen, otherwise you can make a mistake with the size, and in the end you will have to make new holes in the doors, and this is just a waste of time.

Decorative inserts

Another one interesting idea How to update a kitchen set with your own hands - sticker decorative inserts on the facade of cabinets (including doors). For this you can use the most different materials- remains of ceramic tiles, for example.

To do this you will need the following materials and tools:

ceramic tiles (you can take leftovers for this purpose and even buy scrap at a bargain price);
tile adhesive;
overhead strips.

No special skills required. You should not abandon this method for the reason that you have never had to lay tiles before. Believe me, everything is much simpler than it seems. First you need to unscrew the cabinet doors and remove the fittings. Wash them thoroughly and let dry. It wouldn’t hurt to treat particularly heavily soiled areas with some alcohol-containing solution. If you want to radically update the facades, then you should first paint them. Dissolve tile adhesive. Lubricate the surface of the facade. And start gluing the tiles according to the previously created sketch.

To add aesthetics to the facade, make a frame of decorative or plastic strips around the tiled mosaic. Glue them also with glue, but choose a universal one, such that it can easily fit on both surfaces and does not leave marks.

By the way, the inserts can be made not only of ceramic, but also of rattan fabric - they are most suitable for kitchens whose interior is designed for eco-style or some type of country style.

That's all - finishing of the facades of the kitchen unit is complete. The home craftsman just has to install them in their places and screw the unscrewed fittings.

Let there be color!

Instantly transform the interior kitchen space colored boxes. Nowadays, colored inclusions, disproportionately located on the surface, are very fashionable. If the kitchen is made of wood, simply paint a few drawers in different colors. For example, if a white kitchen needs updating, then paint the drawers green or blue. Don't be afraid to create, there are no restrictions, it can be red or yellow, to your taste.

Although white is considered the color of purity and neatness, in general it is quite boring and monotonous. And it is bright splashes of color that can make furniture colorful and cheerful. If the kitchen is made of plastic, then the drawers can be covered with colored self-adhesive film, which is sold both at construction markets and in stores. Remove boredom and despondency from the family hearth!

Wooden decor

Wooden stickers look original on kitchen doors. You can buy them ready-made - kits for children's creativity are also suitable for this purpose. Do you know how to saw? Amazing! Then make wooden blanks with your own hands! Cover them with varnish and glue them to the doors.

What shape the sticker will be is up to you to decide - small flowers or stars, geometric figures or fences glued across or along door panels. If you have a child, invite him to take part in this interesting activity; he will be very happy to decorate kitchen furniture under your guidance.

Calico accent

Calico facades look nontrivial. In order to decorate a kitchen like this, you will need a piece of chintz, which you can buy in a store or find in your closet, measure the doors of the kitchen furniture, cut the fabric according to the measurements obtained and stick it on the panel (be sure to remove the handles before doing this!).

After drying, paint the chintz with colorless varnish - this should be done five to seven times. Along the perimeter of the glued fabric, you can attach wooden slats, which will complement the innovation and make the decoration more neat. And if you manage to make a lampshade from the same fabric and sew chair covers, then you will get an unusually beautiful kitchen.

Decoupage

Decoupage is one of the most spectacular and cheap ways to update your kitchen set. The works of the masters turn out to be so interesting that even after looking at not very high-quality photos, you still take your breath away and want to try with your own hands to transform the furniture in the kitchen beyond recognition beyond recognition.

To make such beauty, you don’t need anything expensive. All you need is an artistic flair, an understanding of how the transformed furniture will look after decoupage the job will do to completion.

What you will need:

dye;
large drawings of kitchen themes (for example, fruits, beautiful jars with spices or cereals);
acrylic lacquer;
primer;
craquelure varnish (provided that you want to achieve an aging effect - as a result, the furniture will be covered with artistic cracks);
PVA glue (or special decoupage glue);
sandpaper;
set of brushes.

Again, you can't do without dismantling the kitchen. Unscrew the panels and remove the fittings. Thoroughly wash the surface you will decoupage. If necessary, sand and remove uneven surfaces.

Carefully inspect the surface; if there are large cracks on it that spoil the appearance, you will have to putty them first. After this, go over the panel with sandpaper.

In order for the surface to look smooth and the applied decor to look natural later, it is better not to be lazy and prime it.

If you plan to do decoupage on glass inserts, then you definitely need to degrease the glass. Specialists will help you cope with this detergents.

Prepare the design you want to place on the furniture. Consider the surface area, the size of the pattern will depend on it. Don't glue too small images. But, of course, everything depends on the idea being implemented. It is better to use special three-layer napkins for decoupage. It’s up to you to decide which pattern to choose, but keep in mind that they must be of good quality and match the overall interior of the kitchen. If the main decor of the room is made in Provence style, then pictures depicting lavender, olives, and climbing roses are suitable.

By the way, you can print pictures for decoupage yourself if you have a laser printer.

You can go another way - decorate your kitchen cabinets with pieces of wallpaper with a suitable pattern. Perhaps this is the most easy option decor.

If you decide to decorate an old set with wallpaper, then standard decoupage glue or PVA will not work. In this case, the glue is selected depending on the type of wallpaper.

The finishing touch is to completely cover the entire part with acrylic varnish. This must be done 5-6 times.

It is necessary that each previous layer of varnish dry thoroughly.

We assemble the kitchen set and admire the transformation. Don't forget to take a photo and post it on in social networks- this way you’ll be able to wait for your friends to visit you faster; they’ll probably want to learn the secrets of updating kitchen furniture with their own hands and see how the set looks in real life.

Fabric imitation on old kitchen furniture

There is another way to update your kitchen set - imitation fabric. If you don't want to bother with real material, use this method. First you need to remove the doors from their hinges. Paint the façade with white paint and let dry completely. Next, apply a thin layer of paint of any other color of your choice, but make sure that the white color does not show through the new layer. If you wish, you can leave a white border around the edges. Now start creating. Take a spatula with large teeth and draw straight lines from top to bottom. The result will be smooth paths. Step away a short distance and look at the door - it seems that it is covered with striped fabric. If you also draw horizontal lines, it will feel like the fabric is checkered. There is one important circumstance - be sure to make sure that your hand does not tremble and that the lines are straight. You should also not take your hand off when drawing lines, otherwise the paths will look sloppy.

Self-adhesive film

One of the simplest and most inexpensive ways to update a kitchen set is to cover the facades and interior shelves with self-adhesive film. The range of this material in stores is impressive - you can easily choose a vinyl film with the desired pattern. The image on the film imitates different surfaces: a natural stone, leather, wood texture.

Self-adhesive film is ideal for restoring old kitchen furniture:

Tolerates high humidity well;
Resistant to sudden temperature changes;
Cleans well;
If necessary, it is easy to replace the damaged fragment.

Materials and tools:

vinyl self-adhesive film with the desired pattern;
accessories;
roulette;
marker knife/scissors;
rubber roller;
sponge.

Before starting restoration work to improve the appearance of kitchen furniture, it is necessary to completely empty it of its contents, remove shelves and drawers, remove facades from hinges, and remove fittings.

Place the unscrewed facades on a hard horizontal surface. Now take the dimensions - the height and width of the drawers and facades that you are going to cover with self-adhesive film. Write down this information.

Unscrew handles, corners and other fittings, if any, on the facades.

Now arm yourself with sponges and detergents - thoroughly wash the surface on which you plan to stick the self-adhesive. Make sure there are no greasy stains on the panels and shelves. Don't forget to wipe the set dry with a clean, soft cloth that does not leave lint.

Self-adhesive film is easy to work with; even a novice furniture restorer can handle it without any problems. Please note that there is a paper centimeter grid on the back of the film. It will help you cut out the parts to the desired size.

Don't forget to add 4-5 cm to the pattern in those places where the film will bend. This margin is necessary for the film to stretch well. When you start cutting the film, control the location of the pattern, if there is one.

Cut out using a marker knife required amount parts according to predetermined dimensions (including allowance for hems).

Start decorating the set. Apply the film to the surface of the facade, carefully peel off the protective paper base, on which a centimeter layout is made. After the film has stuck evenly, go over it with a rubber roller. Make sure that the self-adhesive film lies flat and there are no air bubbles underneath it.

In this simple way, cover all the facades, shelves, and drawers. Replace the fittings if necessary. Screw the fronts into place.

Now admire your work! The set has been transformed and will last for several more years or until you want to radically replace all the furniture in the kitchen. In the meantime, get ready to listen to compliments from friends who stopped by for a quick look, that they were able to transform their old headset beyond recognition so cheaply.

Replacement of facades

There is also a radical way to update a kitchen set - completely replacing the doors. But let’s say right away that this method cannot be classified as economical. Having taken measurements of the old doors, you can order new ones, at your discretion, both in color and material.

You can varnish or paint new doors. And don’t be upset that except for the doors, everything remains old; believe me, no one will notice this. And if the foundation of the kitchen is in good condition, then it will be able to please you for many more years. There is one more important detail - you did not overpay for the update, because almost everything wooden kitchens They are basically made of chipboard, and only the front panels are made of wood. Think for yourself why you need new expenses when the “skeleton” of the furniture is already good. If the shelves have become so dirty over the years that they are almost impossible to clean, cover the surface with self-adhesive wood-look film - inexpensive and beautiful!

Glass replacement

If your kitchen cabinets have glass doors and shelves, replace them with new, more modern ones. Nowadays frosted and colored glass is at the peak of popularity. An updated facade of kitchen furniture, as well as new shelves - and you can consider that you now have fashionable furniture in your kitchen.

It is best to order glass in a store, but if you do not have the funds, you can use the method that our grandfathers invented - a mixture of powdered chalk with silicate glue Apply with a brush to the glass in two layers.

You can put beautiful bright dishes on the shelves, which will give the kitchen a “cheerful mood,” and you can add lighting under the shelves. The result will be a kitchen set that will not be inferior to expensive Italian furniture.

Moidodyr

If our tips and examples with photos have not convinced you to update your old kitchen set, then at least try to simply wash it thoroughly. Over many years, a huge amount of soot and grease eats into the surface of the furniture, and with proper cleaning it can even change color. Furniture that is finished with plastic and covered with enamel can be easily cleaned with ordinary washing powder at the rate of one tablespoon per liter of water. Wash the surface of enameled furniture with water above fifty degrees using soda or laundry soap, not worth it. The listed means lead to tarnishing of the enamel. It is enough to wipe the wood with a well-wrung out cloth, and then wipe the surface of the furniture dry with a linen napkin.

If there are many small cracks and scratches on the surface of the furniture, purchase special remedy, which masks them. If there is a stain on the lid of your table from a hot pan that was once placed, you can easily wipe it off with a mixture of alcohol and vegetable oil.

Metal parts of the kitchen that have darkened or tarnished over time can be updated with a self-prepared product - ammonia (30 g), chalk or tooth powder (15 g) and water (50 g). This entire mixture must be shaken thoroughly, and then applied with a flannel napkin to the darkened surface and rubbed until shiny. After this treatment, furniture handles will be better than new ones.

In a word, choose the method that you like and go ahead! Believe me, it will appreciate everything you do for the sake of your favorite kitchen and will delight you with its new look for a long time. We will be glad to see in the photo how the furniture has been transformed, thanks to our advice and your skillful hands.

The furniture in the kitchen is subject to serious stress. It is affected by negative loads such as high humidity, temperature changes, and aggressive substances. As a result, the products lose their original appearance and shine. Therefore, there is often a need to carry out a process such as restoration of kitchen facades.

Options for solving the problem

Thus, repair of kitchen surfaces can be carried out in the following ways:

use of self-adhesive and photo films;
painting of products;
the use of decorative elements and inserts;

Of course, you shouldn’t forget that you can change the facades on the kitchen set.

Using self-adhesive and photo printed film

This method is considered the simplest and cheapest. Today there is a wide range of such films on the market. Particularly popular are models with imitation wood, marble and others. natural materials. When choosing, you should pay attention not only to the appearance of the material, but also to its quality and performance properties.

When it comes to self-adhesive film, experts recommend choosing vinyl products. This popularity is explained by the fact that such material is waterproof, which allows you to reliably protect the wooden kitchen facade from high humidity, which is present in the room. The film also withstands temperature changes and mechanical stress well.

The most popular modern solution is to cover the kitchen facade with film with photo printing. This allows you to create your own unique style.

Film ordered according to the size of the kitchen The result of pasting a façade with photo printed film

To cover kitchen facades with film, you need to have a set of certain tools and materials on hand:

film and scraper with which it will be smoothed;
ruler and meter;
scissors and a stationery knife.

When all the tools are prepared, you can begin the direct restoration of the facade, which is carried out in the following sequence:

Take measurements of cabinets and all furniture elements that will be covered with film. To make work easier, it is better to remove them and place them on a flat surface.
Prepare elements for pasting. To do this, all fittings are removed. Wash the façade thoroughly. Special attention It is worth paying attention to greasy stains. If such contamination remains somewhere, then during operation the decorative film for the kitchen will begin to swell and come off. As a result aesthetic appearance and the integrity of the coating will be compromised. When finished, thoroughly wipe the items dry.
Cut the film according to the measurements that were previously obtained as a result of measuring the façade elements. To facilitate the process, it is worth using a special mesh, which is applied with reverse side material. This will allow you to make a high-quality, even cut of the film. Experts recommend paying special attention to models with repeating patterns. After gluing they should match.
Cut the film according to the markings. It is better to do this with a stationery knife. Curvilinear designs are cut out with scissors.
Apply the film to the facade. On at this stage All work must be done slowly. Decorative film in the kitchen it is glued gradually. In this case, the protective paper must be peeled off a few centimeters at a time.

If you try to glue the entire film at the same time, it will not give the desired result. The material will lie unevenly, which will lead to repeated restoration of the facade element.

After all the cabinets and other products are pasted over, the headset that was previously removed is fixed on them.

At the final stage, all that remains is to hang the products in their place. Thus, restoration of kitchen facades is carried out with your own hands. . Using film you can not only restore furniture to its original shine, but also refresh the interior. The peculiarity of this material is that it can be used on any surface. It is also worth noting that vinyl film is very easy to clean, which will make it easy to keep your kitchen clean.

Painting and decorating the kitchen facade

Often the restoration of kitchen facades is carried out using a technology such as molding, the essence is to attach it to furniture decorative elements. In this case we are talking about semicircular planks. Most often they are used on flat facades. As a result of restoration, you can get completely different furniture, which will be distinguished by its originality and elegance. After fastening decorative strips Painting is being carried out, which will give the facade a finished look.

To update your kitchen furniture, you need to have on hand:

Decoration is carried out in the following sequence:

Prepare façade elements. First of all, they need to be removed and the fittings removed from them. After this, thoroughly clean them from dirt. Particular attention should be paid to greasy stains. Since the façade will be painted during the restoration process, it is best to carry out the work outdoors. It is first laid on film.
Take measurements and cut the strips to the desired size. The edges of the decorative strips are cut at an angle of 45 0. After this, you can begin attaching them to the facade. To do this, it is recommended to use high-quality glue, which will ensure reliable fastening of decorative elements.
When all the planks are glued, the products are prepared for further painting. It is worth considering that you need to wait some time for the glue to dry completely. After this, the surface is primed. You can use a spray gun for this. The reservoir is filled with primer and sprayed at a distance of 20 cm from the product. Before proceeding with further work, you must wait until the primer dries. This will take close to an hour.
Painting is carried out in the same way as priming. The prepared paint is poured into the spray gun container and sprayed at a distance of 20 cm from the surface. To paint the facade, experts recommend using deck paint, which is highly resistant to various influences. If desired, you can decorate the surface with various patterns. Stencils are used for this.

It is worth noting that painting products made of wood or MDF must be done with a spray gun. Using available tools such as a roller or brush will degrade the quality of the product.

When the paint is completely dry, the fittings are installed. If desired, you can use new products. The main thing is that the fittings fit optimally into the new kitchen design. Next, the finished façade elements are fastened into place.

By following all the rules and the sequence of work, you can restore the facades of kitchen furniture with your own hands. The main thing is to choose the right paint that will optimally match the interior of the room.

If the restoration of kitchen facades seems difficult, then contact a specialist.

Use of decorative inserts

Although these types are not very popular repair work, but restoration of facades MDF kitchens can be carried out using decorative inserts. Most often used for this: ceramic tiles, rattan, decorative mesh.

Of course, if the furniture has lost its original appearance, then it still needs to be painted, and then start decorating. As in previous cases, restoration of kitchen furniture facades can be done by yourself:

Preparation. Remove the façade elements and remove all fittings from their surface. Clean them from dirt. To simplify this process, it is better to use detergents. Before painting, wipe the surface dry.
Painting. When the products are prepared, you can start painting them. To protect wood from negative factors environment, it should be covered with deck paint. To apply the paint and varnish substance, you can use any tools, be it a brush or a spray gun.
When the paint is completely dry, you can proceed directly to decorating the facade. It is recommended to use tile adhesive to attach the tiles. The work must be done very carefully. Excess glue should be removed immediately before it dries.

Decorating kitchen furniture with tiles.

It is important to know that tiles have weight, and door hinges are not designed for this.

To complete the decoration, molding is attached around the tile appliqué. As for rattan inserts, they are mounted into the facade using the following technology:

First of all, you need to take measurements of the doors, which will allow you to calculate how much rattan fabric will be needed for decoration.
Moisten the rattan fabric cold water, which will allow it to increase slightly in size. After drying, it will stretch like a string.
At the next stage, the planks are prepared, with the help of which the rattan will be fastened. They may differ slightly in color from the decorative material.
The prepared canvas is cut to size and attached to the facade using planks and furniture nails.
At the final stage, the fittings are installed. The doors are installed in their places.

Kitchen makeovers classic style using furniture decors

This way you can give your furniture a completely new design. But the main thing is that you can do it yourself.

Artistic painting of the kitchen

Perhaps the most interesting, but quite painstaking, is hand-painted art kitchen doors. The cost of work starts from 5000 rubles. per sq.m. With this type of work, imagination is limitless in creating a design.

Takes ~4 minutes to read

The old set was adjusted to the size of the kitchen, and everyone was already used to it. But here’s the problem: the facades are dilapidated, the hinges are loose. We can say with confidence that such furniture will last for a very long time if the plywood does not delaminate or the chipboard does not swell from getting wet. In this article we will tell you how to update an old kitchen set with your own hands.

Current repairs are carried out according to plan:

strengthening or replacing hinges (sometimes the hinge has to be moved to newly drilled sockets),
sealing cracks followed by painting, pasting with self-adhesive film,
decoration of facades in connection with the new kitchen concept,
complete replacement of the countertop or thickening it on top of the old one.

The set requires maintenance and repair. The main destroyer of kitchen sets is not time, but incorrect installation. A crooked floor leads to skewed doors and loosening of fastening screws. Even before decorating the facades, all cabinets and cabinets must be checked against a horizontal plane.

How to cover a kitchen unit with self-adhesive film

The update method is suitable for laminate furniture. Careful preparation of surfaces will ensure a tight fit of the film.

There is no need to start gluing right away; it is necessary to carry out the following preparatory work in the exact sequence:

We remove the doors and inspect them against the light. Scrape off the dried fat tubercles, wipe with acetone or white spirit;
We put the peeled edges back in place by gluing them;
We rub the potholes with fine sandpaper, remove the dust with a vacuum cleaner, and apply a thin layer of acrylic putty. After drying, sand and prime with construction soil.
Deeply damaged areas should be cut out, outlining the area according to the template of the inserted patch. The insertion can be bottle cap, wood veneer, thin plywood. Then do the work from the three points above.
A better fit will be achieved by varnishing. An important process for light film - every defect is visible on it;
Gluing begins from the edge of the door (or along the edge drawer). Therefore it must be clean and absolutely straight.

Calculating the area of the purchased film according to the area of the surfaces to be pasted is not suitable. You need to decide on a sample, based on its width, draw on paper each detail to be restored on a scale of 1:10. Cuts and overlays will be immediately visible and will not last long. We start from complete cuts and put up with the inevitable remainder.

Subtleties of the matter

The “wood texture” pattern horizontally and vertically on adjacent surfaces looks unnatural. It is better to choose a single direction for all facades.
“Granite chips” require less thorough preparation, but mother-of-pearl will reveal any roughness.
You need to start gluing the film from the wrong side, grabbing the top and bottom edges, leaving the side edges for completion.
You cannot pierce the self-adhesive on the tubercles with a needle: dirt and moisture will accumulate in the punctures, and then the tubercles will increase.
Very jagged edges can be smoothed out by gluing a PVC construction corner onto them. From the corner the film will lie more evenly. By placing even chips under the corner, you can adjust the distortion of the gaps.

Replacement of old furniture facades

We unscrew the old facades, remove them, and take measurements of the cabinet or hanging cabinet. We check the corners with a square. We eliminate existing distortions by laying corner clamps. Only from the newly restored corners can the exact size of the new facades be determined. For two door cabinets and cabinets, subtract 3 mm from the width - for the convergence point in the middle.

Cutting new laminate flooring with a hacksaw is a bad practice. Fine-toothed only circular saw at high speed you can avoid chipping. If House master If you decide to do everything yourself, the recommendation is this: you need to remove the plastic under the metal ruler with an awl and go deep down to the chipboard itself. The plastic is cut along two lines with an indentation of width cutting tool(usually 2 mm).

When without Chipboard chips It is not possible to cut, so the edge is not a strip, but a 3D one. It needs to be filed on a chair, giving a length allowance of 3 mm (an edge of this type hides the corners of the shield). The same allowance - 3 mm - must be taken into account during cutting.

How to update old kitchen furniture with your own hands: painting, moldings

Those who decide to change their facades should pay attention to an excellent material - moisture-resistant plywood. It is light, durable even with through cuts, which is important for frame and openwork facades. In addition, two layers of 8 mm can be folded into a thickness of 16 mm and not change the specified dimensions old chipboard headset.

The required thickness can also be achieved using moldings. Semi-cylindrical, molded, flat, classical ancient Greek mutulas - all these configurations, superimposed on a spectacular background, will introduce clear lines, expressive style. Moldings create the effect of milled Victorian style furniture. The most weakness plywood - the edge - is protected with wood, for example, birch stationery rulers.

Plywood sheets only need a primer before painting. Previously painted chipboard facades without damage do not need to be primed. It is impossible to re-stain stained stained wood. But you can paint it with high-quality acrylic or pentaphthalic paint, tinting it yourself or using a centrifuge at a tinting center.

Painting Tips

Between the wide moldings, pearlescent acrylic varnish applied with a rubber spatula is expressive.
A wood-look pattern with the same shade as the molding goes well with a wooden floor. The texture is painted with two paints - a lighter and a darker one - using a fluted brush with thick bristles using the “wet” method.
Plain surfaces will not show paint streaks if the paint is applied with an airbrush. Without stripes, you can paint with a roller. The roller should be velor, and the painting should be completed in one direction - rolling only up or only down on the facades of the entire set.
A beautiful marbled pattern is obtained from shiny pentaphthalic paint. The background is rolled out with a roller. On a damp layer of several jars, apply spots with a brush - light, bright, with blackness. All are sharply different from the general background. A nylon plate cut from a container reduces the drops. You can mix it for 15 minutes. Then the surfaces are not used for 48 hours.

Decorative inserts

Flat plastic inserts, composite marquetry, carved volumetric, chased from metal - a desirable decor if a certain style is observed. But you can set a unique new style. Decoupage became widespread and became a total women's hobby. It is famous for its environmentally friendly technologies. Overhead rondos, ovals, boutonnieres, corners and appliqués are created, and sometimes the entire set is modified beyond recognition. The stylistic possibilities of the decoupage technique are wide: from archaic to ultra-modern techno.

Decorating with ceramic tiles

Which modern master I was the first to glue the remaining wall tiles to the facade - history is silent. But the traditions of using ceramics to decorate tables and artistic enamels on examples from the past are indicative. Of course, there can be no question of a layer of tile adhesive under such applications. Thin stripes and diamonds can transform a set and reliably protect the wood from external influences. The range is so wide that it can complement any style.

A few examples:

Style	Type of tile	Tile options	Location	Mounting method
Classical	Geometric constructions in the form of flowers, stripes	6 x 6 cm, 10 x 10 cm, 12 x 12	frieze (ribbon) under the tabletop, on overhead fixed flanges as pilasters, single inserts on the doors	Sticker, under wooden slats with selected quarter, behind brass profile
	Painted majolica	4 x 4.6 x 6 cm	Rhombic diagonal order	Sticks
	Ceramics with a thin layer of glaze, composite plaques	6 x 6 cm, 1.5 cm - on the edges	On the doors in the center	Sticks
	Glass, ceramics with a thick layer of glaze, not ornamental	Elongated forms from 2 cm in width, mosaic	Horizontal and vertical chains, arrangement of teeth as an unfinished construction	On smooth surfaces
Japanese minimalism	Glazed ceramics smooth and textured	5 x 5, 6 x 6, 10 x 10 cm	Vertical inserts between the slats of composite frame facades	Glue into the groove
	Non-story tiles with a thick layer of glaze, relief	No more than 15 cm on the side	Single on smooth surfaces

To decorate facades, single “full-length” flowers, rivets, nail heads and entire still lifes are produced. Before gluing, any of the tiles are primed on the reverse side, dried, and only then glued to laminate or wood using mounting compounds. Glass mosaics on grids don’t even need that - they are installed right away.

Decoration with rattan inserts

Colonial, oriental, safari - styles that imply structural facades. Rattan weaving replaces glass and reliably protects facades from impacts. Palm gratings absorb moisture without warping the surfaces. Such qualities are extremely important for the kitchen. The range is also extremely wide: hexagonal weaving, transverse-longitudinal, combined. Plus - all kinds of colors.

The best varnishes are at the beginning of the list:

nitrocellulose,
alkyd,
polyurethane,
epoxy,
acrylic.

There are a lot of “combi” varnishes with the partial addition of certain substances: shellac, resin, drying oil, acrylic suspension. The wide variety is associated both with the purpose of improving the compositions and with different purposes. It is often necessary to re-varnish surfaces containing lecithin (converted fats). Nitro varnish will no longer stick to this. In any case, varnishing is the most reliable way protect solid wood and paint on furniture. If you don’t like shiny shine, choose a matte composition. You can add particles for sparkle, tint to taste (tinting reduces transparency). By selecting the composition and mode of the nozzle of the spraying device, the varnish creates the effect of raindrops, bubble skin, silk, and mica plates.

Some varnishing tips:

the first layer must be extremely thin, dry, and carefully sanded - high degree shine depends primarily on this process;
the varnishing roller must be made of fur that is resistant to caustic thinners; even before use, the roller is washed, even a new one, and the strength of the bristles is checked;
the same requirement for brushes;
Any brush lint or bristles that accidentally get caught are quickly picked out with an awl;
varnishing is carried out only in a clean room;
to avoid splashes, the spray nozzle is first tested on cardboard and only then the torch is transferred to the surface to be painted;
transform with tinted polyurethane varnish ordinary glass in tinted;
varnish with a small “chameleon” additive becomes pearlescent.

Very important! Spraying any paints, even acrylics, is extremely harmful to the respiratory system. You need to work with a respirator.

You can update and significantly improve your kitchen set without significant investment on your own. If the kitchen furniture is already on its way out, you shouldn’t rush to get rid of it, because if you have the desire and then apply some effort, you can turn it into “candy.”

We put furniture in order with our own hands

Repairing a kitchen unit should be divided into several stages:

repairing cabinets and replacing hinges on doors;
thorough cleaning of furniture from dirt;
degreasing surfaces;
decorating the front part and countertops in the most appropriate way (with self-adhesive tape, varnishing, painting, decoupage technique or other similar methods).

Rehabilitation of kitchen furniture, of course, always begins with the removal of all the contents of the cabinets. In order to improve general form furniture, it is advisable to completely reassemble it or, at a minimum, tighten it up in all necessary places. It would also be a good idea to lubricate all the hinges to eliminate creaking and other extraneous sounds.

If we are talking about a set made of natural wood, such furniture is most likely better preserved than its counterparts made of MDF or chipboard. This is due to the fact that wooden furniture does not deform over time, but only becomes covered with scratches and other defects, which are quite easy to get rid of.

Sanding wooden furniture elements

How to update an old kitchen set made of wood by breathing into it new life? High-quality wooden furniture is worth a little “fuss” and a thorough effort to tidy up its appearance. The surface of wooden furniture lends itself well to simple grinding, which removes roughness, chips and other defects, and such manipulations do not require either expensive tools or extensive experience. This can be done with sandpaper or scrapers, a metal rectangle with a cutting edge.

Some people think that grinding scrapers is difficult; others cannot even imagine this tool “in the flesh.” In fact, this is an ordinary scraper and getting used to working with it is as easy as shelling pears. The tool is taken with both hands and forward movements are made in the direction of the wood fibers. Upon completion of rough grinding, the surface wooden elements brought to perfect condition with sandpaper.

Upon completion of the work, the surface is coated with a primer to give the treated furniture water-repellent qualities and better adhesion for subsequent work.

Subsequently, the furniture is opened with varnish to add gloss. The varnish coating also reliably protects the wood from unwanted insects, mold and mildew.

The technique of applying varnish is no different from painting. This is done using a regular brush and wood varnish.

Pasting of furniture facades with polyvinyl chloride film

Restyling kitchen furniture using self-adhesive film can also be called one of the most popular methods today, since updating the doors kitchen cabinets in this way it is very easy.

A distinctive feature of the method is its simplicity and accessibility. In addition, the colors of PVC film can be very different: from imitation of natural materials (such as wood or marble) to bright abstract designs. Self-adhesive film is not afraid of water and is easy to clean, so it is a good new “clothing” for kitchen furniture.

Stages of working with self-adhesive film

In order to update kitchen furniture and improve its appearance using self-adhesive film, you must act carefully and technically. The work steps here will be as follows:

prepare the surface;
cut self-adhesive film;
carefully glue the material.

Before you start covering the facades of kitchen furniture with film, you need to prepare the surface. This stage involves thorough cleaning of surfaces from any type of contamination. If after the preparatory work the surface of the furniture has roughness, it is advisable to putty it before pasting, making it smooth - otherwise the end result may result in disappointment. The hardened putty is cleaned with fine sandpaper.

Correctly cutting the film is also a very important moment. In order to achieve clear, even lines, first, on the back side of the material, make correct markings, it will be as convenient as possible to cut pieces of the required sizes.

To avoid mistakes when gluing PVC film, you should study the recommendations for its use, which can be found on the packaging. In addition to advice, there is detailed step by step description working with this type of material. When starting gluing, first separate the protective paper from the film, then calmly and smoothly apply the material to the surface, smoothing it from top to bottom. You need to move gradually, all the time getting rid of accumulated air, expelling it out (by analogy with wallpaper).

If something goes wrong, the film can be immediately removed and re-glued as needed, however, it is better not to let this happen, as problems may arise when the material is torn off. In addition, this must be done immediately, because in a couple of hours decorative material it will completely “set”, and then you will have to clean it off and do everything all over again. If during the work you still cannot get rid of the obsessive bubbles, you can correct the situation with a needle, piercing the place where the air accumulates and carefully smoothing it out.

Furniture painting

You can also update your kitchen furniture with paint. Painting kitchen furniture yourself is not a difficult task. If you decide to revive the furniture using this method, you will need:

primer;
clean rags;
several brushes (angular, regular);
roller;
dye.

Work begins with disassembling furniture and removing doors from cabinets. At the end of the work, the hinges and fittings can be replaced, which will also benefit the furniture. Then all surfaces are cleaned of dirt and old coating, and if necessary, sanded with fine-grained sandpaper. To achieve a perfectly flat and smooth surface, the primer is applied several times at intervals of 6-8 hours. After complete drying, you can begin applying paint in one or more layers.

Decoupage of kitchen furniture

Creative people might want to decorate old furniture in the kitchen using the decoupage technique, which involves decorating the facades with various applications and designs.

To work you will need:

materials for application (beautiful napkins or magazine illustrations);
scissors;
flat brushes (thin and wide, for applying varnish and glue);
special glue for decoupage;
masking tape;
glossy, matte or acrylic varnish;
acrylic paints.

If the surface of the furniture has already been cleaned, it is enough to degrease it with alcohol or glass washing liquid. Next, take a brush in your hands and begin to cover it with white acrylic paint the place where the application will be located. This procedure is desirable for a more expressive look of the drawing, but it can be skipped. Then they prepare and cut out pictures that will decorate the furniture. You can use napkins or photographs as a basis. Having cut out the pattern of the required size, the lower layers are separated from it, after which the upper one is applied to a previously prepared place on the furniture, applying a layer of varnish, transparent acrylic or ordinary PVA glue on top of it. Thick paper on which the design is applied can also be thinned on the reverse side using fine-grained sandpaper. When the applied application has dried, the work is brought to perfection by applying paint at the border between the application and the furniture. This is done with a sponge dipped in paint. After the paint has dried, it is important to fix the design with matte varnish, which should be applied in 2-3 layers, with intermediate drying. This technique will help to completely level the surface and make it smooth.