Decorative plaster compositions - the most popular material for unusual finish walls. They allow you to create truly original interiors. The cost of such plasters is quite high. But we can quite save the budget for repairs if we apply them ourselves. It is not so difficult.
The main thing about decorative mixtures - what you need to know?
Decorative plaster (DSh) is a composition for finishing wall surfaces, consisting of a binder and special fillers. As the first, mineral (lime or cement) and synthetic (various resins - acrylic, polyvinyl acetate and others) components can be used. The function of fillers is usually performed by marble or granite chips, quartz, White sand, as well as combinations of these materials. LH with a mineral binder and coarse-grained additives are recommended for processing walls from the outside. And here are the compositions synthetic basis and fine fraction fillers are more suitable for interior finishing activities.
Also in the described decorative compositions there is a pigment. It gives the mixture the desired color. The pigment is also synthetic and mineral (natural). Natural additives - indigo, ocher, cochineal, red lead, azurite, ground malachite, vivianite, charcoal and others, are prone to rapid burnout of LH. In addition, compositions with natural pigments are expensive. For this reason, plasters with synthetic coloring additives have become more widespread.
The texture of the described coating is formed using all kinds of granules, fibers, flakes, small gold balls. The most popular types of LH among home craftsmen are considered to be:
- Venetian compositions;
- flock mixes (coating with silk effect);
- bark beetle (walls after applying plaster become like tree bark);
- coatings with the texture of rain and rock;
- compositions with marble chips;
- texture compositions under the stone.
DSh is available in the form of dry mixes (they are diluted with water before use) or ready-to-use without any additional steps. The effect of using both types of plaster is the same. At the same time, ready-to-use compositions are more convenient for home craftsmen who decide to decorate the walls with their own hands.
Rules for processing walls with plaster - we are preparing thoroughly
Before using LH for its intended purpose, you need to understand the features of working with such compositions. First of all, let's find out what tools we need. Everything is simple here. We buy a scraper, a trowel, a drill with a mixing nozzle, a trowel, brushes, baths, rollers, combs, spatulas of various sizes. You may also need other tools used to finishing works.
Then we proceed to prepare the walls for plastering. Their surfaces must be absolutely clean, dust-free and dry. If the walls are dotted with cracks, you will have to repair all existing defects. If necessary, we knock down the protrusions on the surface to be decorated and fill the depressions with a suitable composition. After that, we prime the cleaned base. This operation will protect the coating from moisture, deforming stresses, temperature changes, and strengthen the carrier layer.
We choose the primer taking into account what kind of decorative composition we use. Carefully read the instructions for the plaster! It indicates the recommended type of soil. Several Yet important points. The primer layer should have a thickness of no more than 20 mm. It should be very well compacted. If this is not done, the uniformity of the texture of the applied LH will be violated. In some cases, a layer of soil must be kept on the wall for several days, periodically spraying it with water.
If the plaster will be applied to drywall, wood, plywood sheets, wood-based panels (chipboard, OSB), they must be treated with deep penetration primers. Such bases are prone to deformation when decorative mixtures are applied to them. Also note that most modern LHs set within a few hours. However, they take 24-36 hours to dry. A complete hardening of the decorative composition is observed after 7-8 days.
How can a decorative composition be applied?
There are several options for processing the walls of the LH. The most popular ways of applying the composition are given below:
- spray technique;
- spraying;
- stretching (creating a relief with a trowel).
It is easiest for craftsmen to form the required spray coating. This technology is simple and clear. We take a suitable tool (for example, a brush or even an ordinary broom) in one hand. We dip it in a decorative composition. In the second hand we take a stick. We bring a broom (brush) to the treated surface. We hit the tool with a stick. As a result of the impact, splashes of the decorative mixture fly onto the wall. We get a coating with splashes and flakes of various sizes. We are waiting for this layer to dry. Then repeat the above procedure. We impose as many layers as we need, smoothing each of them with a roller or other device.
A variation of the classic spraying technique is the so-called Italian plastering. The order of work will be similar to that described above. But when decorating in Italian, we do not need to wait for the previous layers to dry. The next portion of the solution is applied to wet surface. Note! This method of decoration involves the application of layers different shades. That is, if we first use blue plaster, a mixture of a different color is applied on top of it. The result is original decor, capable of becoming an ornament to any home.
Spraying technology is a fast and effective way to finish walls with a decorative mixture. But for its implementation it is required to rent or purchase a special installation. LH is poured into such equipment, and it applies plaster to the surface.
Spraying is carried out continuously. Work always starts at the top of the wall.
The spraying technique is indispensable when we use LH of different fractions and want to achieve a unique aesthetic effect. With its help, you can finish the walls in one tone, and the slopes on the windows and other architectural details - in another. Nuance. On the main surfaces, the composition is applied with a layer of about 3 mm, on auxiliary surfaces - no more than 1 mm in thickness.
Plaster mortar is often applied by pulling. This is an easy way to decorate walls. It is performed using a steel grater or a conventional trowel. Finishing is done strictly from the bottom up. We hold the tool in relation to the surface to be treated at a 60-degree angle. After applying the composition, we form the required pattern and texture using a plastic grater.
In the next section, we will look at common techniques for decorating walls with decorative mixtures. With their help, we can easily make the interior of your home individual and very attractive.
Rocks and rain on the walls of the dwelling - we will do it ourselves
Now let's see what techniques are used to create decorative relief surfaces using LH. There are many of them. A common option is the formation of a rock texture. This technique is ideal for beginners. The procedure is as follows:
- 1. We prepare the wall according to the algorithm we already know.
- 2. We process the surface with a decorative composition. We apply it with a layer of up to 3 mm using a trowel.
- 3. We distribute the LH along the wall (as evenly as possible). We create the drawing we need using the same ironing board.
The movements of the tool can be very different - horizontal, crosswise, herringbone, vertical and so on. We ourselves choose the appropriate relief and form it. In the case when the planned drawing does not work out, we quickly smooth out our art and try to create the original rock again. Note! The float should be rinsed after each treatment. a separate section. Otherwise, it will simply stick to the plaster.
It is a little more difficult to apply LSH with rain. But this technique guarantees a more spectacular picture. The technology for creating rain is as follows. We mark the walls. We draw lines on them under a certain slope. They must have same angle tilt. And we take the distance between them within the size of three trowels. Stick masking tape on the line. We begin to apply plaster from the upper corner of the surface to be decorated with inclined stripes. We fill the space limited by two masking tapes. The working tool needs to be pressed against the wall a little.
As a result, we get a decor that looks like a hedgehog. But we want rain. Everything is elementary here. We wash the tool. We apply it to the plastered surface and smooth the mixture in one direction. Then, by analogy, we cover the remaining strips with a solution. When the LH dries, we remove the remaining minor defects and irregularities from the wall with a sandpaper or abrasive mesh. At the end of the work, we admire the rain that decorated our room.
5 Other Relief Image Techniques
Application of various types decorative plaster can be done with other methods. Let us briefly describe the commonly encountered types of wall treatment with the compositions in question:
- 1. Boulders. To create such a picture, we need to apply a trowel to the primed surface with a trowel. And then finish it with a brush. We hold the latter with respect to the wall at an inclination of 90 °. If you want to get sharply defined boulders, take a hard brush. The soft bristle tool allows you to make more blurry drawings.
- 2. Wave. We make notches on the wall, sprinkle it with water. We apply plaster in zigzag stripes. Then we smooth the resulting waves with a spatula or a trowel. This technique is often used when using Venetian plaster.
- 3. Travertine. We collect portions of the finishing tinted in specific color mixture on a spatula. We throw them on the wall. After that, smooth the surface.
- 4. Broken stones. We process the walls with plaster. We are waiting for it to harden. We drive the tongues into the coating, chipping off small pieces of it. We get stones with crevices.
- 5. Furrows. The technique involves the use of bevels with semicircular teeth. The distance between the latter should be 1.5 cm. Before applying the LH, we must sharpen the teeth. Apply plaster composition on the wall. Smooth it out right away. We apply the rule to the mixture and at an angle of 45 ° the bevel (sharpened part). We create furrows. The type of the latter will depend on what kind of malka (with what shape of cloves we use).
You can try more difficult ways applying DSh. For example, hatching-bouffant.
This technique is performed only on a fresh coating, which is processed with a metal brush. After using it, we wait a day and remove poorly fixed pieces of plaster from the wall. Remove excess parts with a rag, spatula or ordinary sponge.
We apply a decorative mixture with a roller - features of the operation
The walls of the DSh can be finished and paint roller. Although this tool is rarely used for decoration. It is not used when working with Venetian plaster. But for other decorative compositions (structural, textured), it is quite suitable. The algorithm for finishing with a roller is as follows:
- 1. We repair and clean the walls. We prime them twice.
- 2. We prepare the solution. Pour it into a wide container.
- 3. Dip the roller into the bath with the solution.
- 4. sliding smooth movements put composition on the wall. Be sure to leave small indents from the ceiling, adjacent walls and floor.
The plaster is applied in strips at a time. The movement of the roller is from top to bottom. If the LH does not adhere well to the surface being trimmed, we wet painting tool water. By pressing the roller with different efforts, we obtain one or another coating structure. Its final form, in addition, depends on the speed of movement of the tool on the surface.
Choose the appropriate method and technique for applying decorative compositions and feel free to get to work. You will succeed!
Among the many types interior decoration which are very popular in Lately, decorative plaster acquires special significance every year. It is relatively inexpensive, looks great and is very easy to use. Today we will tell you about how to apply decorative plaster.
The benefits of this type of coverage
In order not to be unfounded, let's describe the main advantages that decorative plaster has. Firstly, special attention it is not necessary to pay attention to the preparation of the wall, but at the same time it will allow you to reliably mask almost all defects on the surface.
In addition, this type of finish will be appropriate not only on concrete, but even on wooden wall. There are no joints or other traces of connection, but an attractive appearance can be kept for years. Do not forget that plastering largely protects your house from fire, along with providing good soundproofing of the apartment.
Composition of the mixture
By the way, what does decorative wall plaster consist of? It consists of several fairly simple components:
- water base with a thickener added to it;
- fillers from marble or granite chips;
- preservatives, antiseptics, agents against fungus and mold.
Where is the best place to apply?
If a person who is far from the intricacies of repair enters a room that is decorated in this way, then he can almost never determine how such an effect was achieved. Walls are the best for decorating country houses, although no one forbids the use of such plaster for finishing niches and arches in apartments. In the kitchen, this kind of plaster is generally ideal, if only because of its inability to absorb odors and grease.
We prepare the surface
Before you need at least basic training surfaces. If there was wallpaper or paint on the wall, they will need to be removed as carefully as possible, trying not to leave traces of the old coating.
Read the instructions printed on the package carefully. As a rule, there is a recommendation to apply the composition only to a surface that has been previously treated with a primer. This is especially true for walls made of foam blocks, which have a high absorbency. It is better to remove nails completely or cover them with a thick layer of varnish. Otherwise, after a while, a large rust stain. If decorative wall plaster will be applied in a newly built or renovated building, then it is enough to simply cover the fresh surface with liquid lime mortar.
What tools will be required?
You will need to purchase embossed roller, spatula knife and brushes, as well as rubber trowels. In general, the set of tools depends on the texture that you prefer to see on the walls. The fact is that the patterns on this plaster appear when the roller moves: it shifts the filler granules, and they form an interesting pattern on the wall. When we apply decorative plaster, we can show all our design skills!
Textured compositions can generally be applied to the surface using a spray gun with a large nozzle diameter. It is in this way that they are made that immediately attract attention because of the unique pattern. By the way, the composition retains its elasticity for a long time, and therefore it can be given virtually any shape that you may like. To do this, there are rollers with a long pile, curly spatulas or soft curly knives.
Getting Started
It is carried out starting from the corners. Please note that the first time it obviously does not lie in an even and neat layer. Try to do the work on the experimental site first, get used to it. Also, don't leave it for too long. open jar, since the composition in this case quickly begins to dry out, becoming unusable.
Application method
We begin to apply the material on an area of \u200b\u200bno more than 0.5 square meters, otherwise the solution dries quickly. As a rule, the thickness of the applied layer should not exceed two millimeters. The greater the amount of the mixture, the rougher the texture on the walls.
By evenly distributing the solution over the surface, you can begin to create some artistic images. Thoroughly clean the spatula from the solution, after which we begin to smooth the surface with it. Lightly press its bottom edge, then draw down a straight (or winding) line. The spatula from time to time must be thoroughly cleaned of the solution and moistened with water. After all, decorative wall plaster has excellent adhesive properties.
It is not uncommon to see beginners who have a huge piece of material hanging on a spatula. Then all this comes off and falls, inevitably worsening the results of any work.
Your movements during the distribution of plaster can be completely different, because as a result a completely unique and inimitable pattern will be formed. Important! Remove the spatula from the surface to be treated as smoothly and gently as possible, try not to leave traces of it on the surface. If you do not like the resulting pattern, at any time you can slightly moisten the plaster with water and wipe everything.
Before applying decorative plaster in the next area, overlap the already treated area, so you can avoid the formation of joints that spoil a flat surface very much. After application, you need to wait at least a day, after which you can proceed to further work (applying stencil drawings to the wall, for example).
Other decoration methods
All decorative plaster, the photo of which is in the article, can be additionally decorated not only with fancy and unusual patterns but even real pictures. It is absolutely not necessary to be an artist for this: just buy a stencil in the appropriate store, on which you apply a picture. By the way, for this you can use not only paint, but also exactly the same plaster. So your walls will look even more picturesque.
Here's how to apply decorative plaster.
How to make "rain"?
To apply the material at an angle, you must first prepare the walls. First, lines are drawn on them with an appropriate slope. The width between them can be arbitrary, but it should be convenient for you to work with a spatula. After that, glue masking tape on the line.
Work must begin from the top corner of the room. We carefully spread plaster on each strip, and the thickness of its layer should not exceed three millimeters. To create a "drip" structure, the trowel must be lightly pressed against the surface to be treated, and then also carefully peeled off from it.
As a result, the wall will look a lot like frightened hedgehog. It is easy to fix this: take a moistened trowel, and then gently smooth out the “thorns” with it, moving the tool strictly in one direction. The weaker you press, the more embossed and rough the texture of the wall will remain.
All subsequent strips must be applied with an overlap. All of the above actions are repeated in a similar sequence. If the edges visually overlap each other, this will significantly improve the appearance of the finished surface. The joints should be smooth, but they should not be specially smoothed out.
This method is especially good if you are applying a decorative one. Instead, in this case, you need to use twine stretched diagonally.
In conclusion
In conclusion, we can advise you not to rush, to consistently approach work. We have already said that you should not take areas of more than 0.5 m for work. If you rush, the material will dry out, and with subsequent moistening and grouting, you will no longer be able to achieve such beautiful patterns.
Today, there are many different finishing materials. The most popular of them is decorative plaster.
Its leadership in the market is explained by the fact that it has many advantages. It is durable, easy to care for, moisture resistant, while its cost is low.
Consider how to make decorative plaster yourself.
Types of plaster
This material for decorating rooms and facades can have different properties. Depending on the:
- Chemical composition and components.
- Texture and style.
- Number and size of granules.
Chemical composition and components
Mineral, excellent value for money. Made from cement and lime. In stores, it is sold in the form of a dry mix. Therefore, before starting work, it must be diluted in water.
Used not only for internal works but also for decorating facades. Since it contains water-repellent substances.
In addition, it has a number of advantages:
- vapor permeability;
- fire resistance;
- resistant to mechanical damage.
Acrylic plaster is sold ready-made, in the form of a water-dispersion material for decoration.
In its production, a polymer solution is used that connects the filler. This type of plaster is tinted, so you can choose any shade.
Silicone applied for decoration external walls. Because it has various positive characteristics:
- High service life.
- Elastic structure.
- Self-cleaning material.
- High vapor permeability.
- Weather resistant.
Silicate or mineral plaster is very expensive, however, reliable and practical. Since the main component is potassium glass. This will protect the walls from the appearance of fungus.
This plaster is commonly used in the decoration of building facades. But you can find it in the decoration of interior walls.
If it is not possible to buy ready mix, then at home you can make decorative plaster from putty. With it, you can create textured images.
Texture and style
Venetian creates walls from marble. In the photo of decorative plaster, you can see how the room is being transformed. It is produced from an aqueous solution, lime and marble sand. This type of material is applied only to flat walls.
Structural is a heterogeneous mass with granules. It is made from latex and water. Its granules can have any color. The color scheme is tinted at the factory. However, choosing a color is not difficult, as manufacturers offer a large palette of different shades.
Textured is the most popular among consumers. Because with its help in the interior of the room you can create a relief or image on the wall.
Note!
Flock turns the wall into a mosaic. As a rule, it is sold in two containers. The first contains glue, the second contains mosaic elements. They are already pre-painted by the manufacturer. The wall is applied in stages, first glue, then mosaic pieces.
Glazing is used in cases where it is necessary to create a certain effect on the surface of the wall. For example, the effect of silk, velor, sandstone. Application of decorative plaster is possible on the facade of the building.
Instructions for applying decorative plaster with your own hands
Must be done first preparatory work. You need to remove the old finishing material.
The surface is cleaned, in the presence of cracks and holes puttied. After the wall must be treated with a primer.
After all the preparatory work is completed, the plaster is applied using construction tool. The material is laid in horizontal or vertical movements. The thickness of the application is measured by granules. After application, it dries for about a day.
This completes the application of decorative plaster. If desired, it can be painted in a different color or decorated with different design elements.
Note!
Decorative wall plaster is a great way to quickly and inexpensively change the interior of a room.
DIY decorative plaster photo
Note!
TO modern interiors the most stringent requirements are put forward: they must be distinguished by practicality and excellent aesthetic characteristics. Plaster is not just a fashionable and sought-after material; interiors decorated with its help will not leave anyone indifferent.
Decorative plaster is the most natural, super-hypoallergenic material that has high antibacterial properties, excellent reflective characteristics and the highest level of vapor permeability.
The cost of works on applying decorative plasters from 100 m2
Author's supervision FREE OF CHARGE!
In stock
This method of finishing was used centuries ago, although not as massively as it is now. Wealthy people and wealthy nobles invited eminent masters to their homes, and they, in turn, created incredible masterpieces on the walls that have survived to this day. However, times have changed and now decorative putty is available to more people, and you can even apply it with your own hands by watching a couple of video tutorials.
Decorative plaster work price per m2 and the cost of application with the material
The cost of applying decorative plaster per m2 is quite high, due to the quality of the work carried out and the components used. But here any costs are justified for several reasons:
- The material is environmentally friendly, which means you care about your health and the well-being of loved ones;
- The coating looks unique - your neighbors and friends will definitely not have the same walls;
- Plaster for decorative wall decoration is luxurious, it has a lot of advantages compared to paint, liquid wallpaper and in other ways to ennoble the room;
- The service life of plaster is very long, and even after years the walls will not burn out, will not lose their attractiveness.
Advantages of applying "decor" plaster
Popularity aesthetically beautiful coverage It is not accidental, it is due to the advantages of decorative interior decoration, which are appreciated by both ordinary consumers and true professional designers:
- The coating successfully hides the imperfections of the walls, fills in small cracks and even cracks;
- You can apply plaster on walls made of brick, concrete, stone, fiberboard, wood - there are no restrictions;
- The material does not absorb odors, including tobacco smoke, favorably differing from competitors;
- Provides good sound insulation;
- Allows you to get an exclusive pattern in each case, since the pattern on the walls never repeats - it depends on the selected types of materials, and on the design abilities of the master;
- The preparation of the walls is extremely simple - it is enough to use a primer, of course, provided that there are no serious defects;
- Decorative wall plastering is not afraid of moisture if it is covered with wax;
- The walls in the house "breathe", which has a positive effect on the atmosphere of the room;
- Coating components are environmentally friendly, ideal for allergy sufferers;
- How long does putty stay on walls? Its service life is measured in decades.
So, such material is a godsend for the owner of any room, if you need to create an incredible interior that you can admire for hours.
Types of decorative wall plaster
Now let's take a closer look at what types of decorative wall plaster are in the interior, and the video will show how to apply it. The abundance of application techniques, approaches, compositions provides a diverse choice for the consumer. According to the type of surface formed, they differ:
- Plaster - easy to apply, does not require wall preparation, the pattern is heterogeneous;
- Textured putty - has inclusions of sand, stone chips, mica, marble. Don't need to use additional tools, except for a spatula;
- Structural - the most difficult to implement, stencils, special rollers are used for it, design skills and real talent are required;
- Smooth - Venetian putty. The composition of the decorative putty includes dust of malachite, marble, or other natural materials. As a result, it is possible to imitate various metals, stones, silk, leather and precious woods.
What is the peculiarity of such plaster? This is a loose mass, like ordinary plaster, but the whole secret lies in correct application: it is the master's hand that creates unique drawings, reliefs and imitations.
Applying decorative plaster: preparatory stage
Putty is used for decorative finishing of ceilings and walls in rooms, as well as for building facades. But before starting work, you need to understand the technology for applying the composition and the requirements for the surface:
- The walls must be strong, everything that crumbles should be removed;
- Be sure to eliminate large cracks, bumps, cracks;
- A layer of primer with a rough coating is applied, this is necessary for better adhesion of materials;
- For Venetian plaster, as opposed to embossed or textured look, a perfectly smooth surface with minimal differences is required.
The application of decorative plaster is already the final, albeit the most difficult part of the finishing work, for which the walls should be carefully prepared.
Necessary tools for applying decorative plaster
A set of tools for decorative wall plastering depends on the chosen technique. Usually to form beautiful drawing use the following devices that you need to buy in advance:
- Drill and mixer nozzle for mixing the plastic composition;
- Spatulas of different sizes, including narrow ones, are needed for applying the coating itself;
- Trowel or trowel;
- Mitten for creating a relief;
- The roller is the most accessible tool for forming a pattern. Putty applied with a roller can be done even by beginners;
- Household tools - hairbrushes, rubber gloves, dishwashing sponges - are handy tools that can be used to create beautiful walls.
If putty is applied with a roller, it is worth finding a nozzle that you especially like. With this tool, it is possible to create geometric shapes, waves, drawings, swirls and even natural reliefs.
On the market building materials presented plaster mixes most different manufacturers and dozens of compositions, the range is extremely wide. You need to choose the right material that you will use. What do you need to buy to finish the walls with plaster?
- Starting composition - needed for leveling and surface preparation, it can be gypsum plaster, solution on cement base or ordinary clay;
- Priming composition - in a liquid or pasty state;
- Texture paint;
- Protective finish varnish;
- Wax;
- The manufacturer of plasters on the packaging indicates the composition, which particles are included in the mixture, what the result is. Silicone, acrylic, polymer and mineral compositions are produced, in powder or liquid state. The latter are more expensive, but they do not need to be kneaded, calculating the proportions.
You can create a mixture with your own hands, based on Portland cement M400, lime dough, marble flour and chips, mica and coloring pigment. In the interior of the premises, plaster is used at the final stage of finishing, so you should carefully approach the work - the atmosphere in the house depends on it.
Do-it-yourself decorative plaster: video master class
When the old coatings are removed, the walls are prepared, the cracks are plastered over, and the base putty is applied, the most important and creative stage comes - artistic painting. There are several of the most popular and very efficient technician applying the composition. Plaster is applied by any method:
- Using a metal or rubber spatula, thin layers are made in the amount of 5 or 8 units, after each layer you need to wait about an hour until the material dries;
- To achieve the effect of the silk surface of the plaster, a tinted composition is used (the coloring pigment is added at the kneading stage). Several layers of the same color are applied to the wall, but each of them is rubbed in different directions;
- Layers are applied alternately with varying degrees of pressure on the spatula, trowels are used different sizes, creating a chaotic pattern. The surface is polished and waxed;
- To create a smooth relief and lines, toothed trowels are used, usually used to apply glue to ceramics.
Unusual stucco finishing putty- it's quite real. However, in order for the drawing to be beautiful, you will have to show imagination and creative talent.
Do-it-yourself plastering tricks
Putty gives a unique result, however, if you decide to do the work yourself, you should know about the techniques for creating a relief that use professional designers. How to achieve an unusual pattern without buying special devices? You may find it useful:
- Sandpaper with fine grains - you need to carry out only on a dried coating;
- Foam rubber sponges - you can create waves, needles (applying and sharply tearing off the wall), like balls and flowers;
- Cellophane bags - the film is pressed by hand into the surface, and then torn off, creating a relief. Or crumpled paper is wrapped in it, forming chaotic lines. Another way is to crumple the cellophane, pressing it against the wall.
Often used ordinary combs, hands in rubber gloves you can also create an interesting pattern. However, it all depends on taste and skill. Decorative embossed putty is an unlimited field for imagination and creativity.
The price of applying decorative plaster is determined by the qualifications of the master. However, you can do the work yourself if you are looking for a creative approach, dreaming of an interior that you created yourself.
It is possible to transform an apartment inexpensively, and the result will exceed all expectations, especially if a real professional will work on creating the design. Living in a beautiful, luxurious and cozy place - your family deserves it too!
Catalog of decorative plasters (Examples)
