Heated towel rail for the bathroom: how to make the right choice. Installing a heated towel rail in the bathroom

How to choose a water heated towel rail for your bathroom?

This question is asked by many people who have started renovations in their apartment.

If you want to know the answers to the most common questions on this topic, then read the article.

Secrets of choice

Before you go to the store to make a purchase, look through the information about water heated towel rails and be sure to check out the photos of their designs.

Having this information will allow you to choose suitable model, which is guaranteed not to disappoint during operation.

Design of this product must have high-quality assembly and strong soldering of connections.

If the quality of the metal welds seems unsatisfactory, then refuse to purchase the model.

It is better to choose the option that completely suits you in all respects. The best way Seam connections in modern models of bathroom heating devices are considered to be laser welding.

Remember that you can also choose completely seamless monolithic models, which are presented in abundance in modern plumbing stores and shopping malls selling household goods.

If you do not know how to choose the size of a tubular product, then contact the store’s consultants or calculate the maximum allowable size of the installed model using a specialized formula.

If the bathroom space does not allow for the installation of a large, stylish water heated towel rail, then you can choose small narrow or corner versions of these products, which are distinguished by their compactness.

If you are the proud owner of a luxurious bathroom with... large size, then you can choose any model from those presented without limiting yourself in any way.

If you want to create exclusive interior bathroom, then take a closer look at products that have stylish and unusual shapes.

Before you finally choose a heating product model for your bathroom, evaluate its wall mounting systems and, most importantly, discuss with the store manager the diagram of its connection to the water supply system.

Connection of water heated towel rails can be:

diagonal;
bottom;
lateral.

The most functional and heat-intensive are water heated towel rails, which require a diagonal connection diagram.

Products of this type are best placed within a large bathroom.

If the size of the bathroom in the apartment is relatively small, and you do not want to clutter it with a stylish, modern, but large heated towel rail with diagonal connection, then take a closer look at the more compact sizes of these products with side connections.

If you want to choose a high-quality water heated towel rail for your bathroom, then ask the store specialists to show you those product models that are equipped with a Mayevsky tap.

This tap allows air to bleed from the heated towel rail pipes to prevent air jams, reducing the quality of the product.

Visual characteristics

Classic water-type heated towel rails, familiar to all residents of the Soviet and post-Soviet space, are made in the shape of the letter “P” or the letter “M” with rounded corners.

Photos of such heated towel rails prove that they fit organically into modest interiors, not burdened by an abundance of details.

If you want to diversify the appearance of your bathroom, then install a water heated towel rail, which has additional functionality and is made in the form of “ladders”, “lattices” or some fancy shapes.

Photos of such heated towel rails clearly demonstrate that they can become a stylish addition to any ultra-modern bathroom design.

Some modern heated towel rails have hooks that allow you to place towels and other items on them without having to drag them over the pipes.

Other models are equipped with rotating mechanisms that allow products to be freely rotated around their axis.

Products based on rotating mechanisms are more reliable in operation and are able to withstand heavy weight things placed on them.

Products presented in modern stores can be painted in various colors, for example, bronze, brass, copper, silver, white and even black.

If you are buying a water heated towel rail painted in a “non-metallic” color, be sure to ask the sellers what paint was used to tint the product.

If the heated towel rail is painted using powder coating of a coloring pigment, then feel free to buy this model, since this coating is highly durable and reliably protects the product from external corrosive processes.

After reading this article, you were able to learn about the main specific characteristics of products such as water heated towel rails intended for installation in bathrooms.

Before purchasing this product, carefully weigh the pros and cons and do not make rash decisions so that you can enjoy the quality of your purchase for many years.

Today, a heated towel rail is an essential part of the bathroom interior, not only from a functional but also from an aesthetic point of view. On domestic market you can find many similar devices made of different materials, different shapes and cost. An unprepared buyer's eyes literally run wild. Therefore, let's first decide what characteristics do not correspond to the concept of “good quality heated towel rail”:

made of welded pipe with a thin wall;
the pipe is made of black steel (rusts quickly);
an imported version that is built into the heating system (it happens that such equipment does not have an anti-corrosion coating on the inner surface);
a device with a large number of different tubes (increases the likelihood of clogging;
the equipment has a polymer-enamel coating - it looks less modern than chrome-plated and has worse consumer properties;
equipment without a valve (the so-called “Mayevsky tap”) for draining water (air pockets will form).

Before buying a heated towel rail, decide what type of device you need: (familiar to most of our compatriots), (connected not to a riser with water, but to the electrical network) or (water passes through it, but if necessary, such a unit can be heated using a heating element) , and then proceed to select the best model.

The best water heated towel rails

Energy Modern

Photo: www.sancity.su

Estimated cost- 5200 rubles.

The Energy Modern heated towel rail is made of high quality food steel, adapted to the aggressive environment of the hot water supply system. Reliable and durable (manufacturer provides guarantees). Mirror polishing does not darken over time. The design suits any room and makes it unusual. The high functionality of the heated towel rail is ensured by a large number of horizontal bars. The package includes everything you may need during installation.

Terminus Astra New Design

Photo: maximus-nsk.ru

Estimated cost: 5200 - 11400 rubles (depending on size).

Terminus Astra New Design heated towel rail is best combination functionality, beautiful design and cost. Suitable for connection to both the heating system and the hot water supply system. High quality stainless steel tube, welded using a special technology. Surface polishing of the highest class. The wide range of height parameters (53 - 118 cm) and small width allows you to choose a model that matches a specific room. The design of the heated towel rail is designed for operating pressure 8 atm. (in systems apartment buildings this figure usually does not exceed 7.5 atm.) and temperatures up to 115 o C. The manufacturer provides a 10-year warranty.

From reviews:“I think I made the best choice - the Astra New Design water heated towel rail! And even the wife is happy. Experienced men know how important this is.”

Margaroli Vento 405 rotary

Photo: waveshop.com.ua

Average price: 10400 rubles.

The Margaroli Vento 405 heated towel rail is not demanding on water quality and is resistant to rust. The heated towel rail is different unusual design. Made of brass using chrome plating and decorative processing. Excellent soldering and assembly ensures hassle-free installation. Small sizes(60x64 cm) and the ability to rotate the dryer 180 o significantly expand it functionality. The manufacturer provides a 2-year warranty. The device is equipped with valves and is completely ready for installation. Operating temperature - up to 110 o C, pressure - up to 8 atm.

Reviews:“We have had the Margaroli Vento 405 heated towel rail for several years. It works great, I think the design is superb. The price corresponds one hundred percent to the quality.”

Sunerja Furor

Photo: suntehnica.ru

Estimated cost: 9000 - 13000 rubles.

Sunerja Furor is one of the most original design radiators - at the same time reliable, functional and stylish. The heated towel rail is supplied to the retail chain complete with all the necessary accessories and components. Made from high quality stainless steel. It is possible to equip it with additional elements: thermostats, valves, shelves, corners, hangers, reflectors. Surface treatment and color can be selected from several options.

Reviews:“We bought a water heated towel rail Sunerja Furor. Even the plumber was surprised at how easy it is to connect and how well it heats.”

Zehnder Stalox STXI-060-045

Photo: www.ceramicplus.ru

Approximate price: 21,500 - 26,300 rubles polished and from 14,000 rubles - covered with white enamel.

By purchasing a Zehnder Stalox STXI-060-045 water heated towel rail with an enamel surface, the consumer purchases high-quality equipment at an affordable price.

WITH There are two versions of the heated towel rail: with a powder enamel coating and with a polished surface. Supplied with installation kit. Operating temperature 120 o C, pressure allowed up to 12 bar. Made of stainless steel in the form of a ladder, vertical and horizontal elements are connected by square registers by welding. Weld seams are almost invisible. Small dimensions (60.8x45 cm) allow it to be installed in almost any bathroom. The equipment is equipped with an air vent, which prevents the formation of air pockets during operation.

Our rating: 9.6 out of 10 (although the manufacturer claims that the device is suitable for use in both open system heating and in the hot water supply system, but it is better to connect to the second one. The weld may cause leakage during operation.)

Reviews:“Several years ago I installed a cheap heated towel rail, which leaked literally within a year. This year, during renovation, I bought a Zehnder Stalox STXI-060-045. The reviews on the forums don’t lie - this is one of the best water heated towel rails. I would like to wish success to such a good manufacturer.”

The best electric heated towel rails

TermoSmart Comfort-El

Photo: v-vannu.ru

Approximate price: 8,640 - 10,700 rubles

The specific model of the TermoSmart Comfort-El heated towel rail can be selected based on the size of the room.

Models of various sizes and with different numbers of crossbars are supplied to the retail chain: 50x50x10 cm (5 crossbars), 60x40x10 cm (6 crossbars), 60x50x10 cm (6 crossbars), 80x50x10 cm (8 crossbars). 100x50x10 cm (10 crossbars). In all heated towel rails, heating elements from Siemens are mounted vertically. The production uses stainless steel AISI-304, which is supplied from the Terminus plant. The tube is welded, the seam is created by a laser, the quality is checked by ultrasound scanning. For welding of the remaining elements, semi-automatic contact welding is used. arc welding without additives. All seams are sealed and very thin. The outer surface is polished, the most suitable high class processing. When entering the retail chain, the device is equipped with fasteners (4 pcs.), a cord and instructions.

Reviews: “In our bathroom electric heated towel rail- TermoSmart Comfort ladder for 7 years. We are planning a renovation, we will also change the heated towel rail, we will definitely choose the same company - we just need a different size.”

Argo Luch 4

Photo: www.pk-argo.ru

Approximate price: 4,100 rubles.

The Argo Luch heated towel rail is easy to adapt to any interior. Stainless steel is used in production. It is powered from a household electrical network, the power is small: 60 W (it costs no more than an incandescent lamp), but for a city bathroom with small area this is quite enough. You can choose from three colors: gold, bronze, white. Nominal working temperature+53 o C, the heated towel rail heats up quickly. Equipped with a protective shutdown system. Fastenings included when sold. The manufacturer provides a 1-year warranty. Minimum service life is 5 years.

Reviews:“We recently changed apartments and bought the same electric heated towel rail for the bathroom as in old apartment- Beam from Argo. The previous one served without any complaints for 6 years, so no one in our family doubts the quality of devices from this company.”

ZorG ZR 017

Photo: moyki-bt.ru

Average price: 6,800 rubles.

Electric heated towel rails ZorG are considered one of the best in the world. Russian market. A ladder measuring 86x53 cm is suitable not only for the bathroom, but also for any other room. ZorG heated towel rails are distinguished by high quality and a variety of colors, which allows them to blend seamlessly with a wide variety of interiors. In reviews of ZorG heated towel rails, there is no mention of chips or other damage during operation.

Reviews:“Last year we did some renovations and replaced the heated towel rail. Before this, it was a simple one, most likely Chinese, and constantly broke down. Friends have had a device from ZorG for many years and decided to buy the same one. We were satisfied."

The best combined heated towel rails

ARBONIA Karomix (KM)

Photo: elsostudio.ru

Average price: 132,000 rubles.

The ARBONIA Karomix heated towel rail is unique, completely unique design. The large size (194x50x22 cm) and clear geometric structure allow this device to be made original element any interior. ARBONIA heated towel rails have been repeatedly recognized as winners in sanitary equipment design competitions. Possible configuration remote control. You can choose from a variety of color options when purchasing. Heat transfer at +50 o C - 950 W. If you wish, you can buy a white heated towel rail, reducing purchase costs by 20 - 30%. Installation is easy and the temperature is easy to adjust.

Reviews:“We recently moved from a city apartment to Vacation home. The bathroom is large, so we decided to buy the best electric heated towel rail - ARBONIA. The reviews are excellent, the device is high quality and very beautiful. Delivered in complete set. Thank you very much!"

Allegro

Photo: www.kzto.ru

Approximate price: 10,000-17,000 rubles (depending on size).

Manufactured at KZTO "Radiator", the Allegro electric heated towel rail is not inferior in quality to equipment from foreign manufacturers.

Made of high quality stainless steel in two versions of the outer surface: polymer coated (white glossy) and shiny polished. Polishing is carried out using a plasma-electrolytic method, which allows you to create a mirror-like surface that does not fade during use. A wide choice of heights (330 - 1290 mm) allows you to adapt the device to a room of any size. Heated towel rails are attached using steel brackets. Equipped with a Mayevsky tap and a blind plug.

Reviews:“We connected the bathroom with the toilet, the wall of the latter faces the staircase, so it’s very cold. Heating and hot water Not all year round, so we installed a combined Allegro heated towel rail, which heats up constantly. So far we’re happy.”

Which heated towel rail is best to buy?

“The best” is different for everyone. That's why:

if there are no too high design requirements, then the water Energy Modern may be the most acceptable option;
if necessary, save useful space, the best heated towel rail is Margaroli Vento 405 rotating;
if the heated towel rail should become a full-fledged design element, then choose the water Sunerja Furor or the combined ARBONIA Karomix;
for both very large and very small suitable for a bathroom one of many electric TermoSmart Comfort-El or combined “Allegro”;
if you need to save money, you can buy Argo “Luch 4”;
if you want to have a warm heated towel rail all year round, then Allegro (in a city apartment) or ARBONIA Karomix (in a large country house) are suitable.

While creating harmonious interior In the bathroom, attention is paid to every detail. In addition to plumbing equipment, attributes that are less significant at first glance are also called upon to make a feasible contribution to the creation of convenience, beauty and comfort. And the heated towel rail occupies one of the main positions in this list.

We’ll look at how to choose the right water heated towel rail to complement your bathroom interior with a stylish and functional accessory in this article.

Almost any bathroom in a typical apartment building initially equipped with a water heated towel rail. This zigzag section of tubular pipe is connected to the hot water system.

The main purpose of the device is to dry towels, although it is also very convenient for drying clothes and heating small space bathroom

Bathroom - room with high humidity, conditions in which the towels take a long time to dry. On a hot device, this process proceeds several times faster.

Provided there is a centralized water supply, when part of the hot pipe is used for its installation, the heated towel rail can be used all year round. There are no problems with the safe operation of the device.

Although no one excludes the risk of depressurization at installation joints, its probability is quite low. And the consequences of this unpleasant situation can only entail additional financial costs for repairs.

In the cold season, the device, acting as a kind of compensating loop through which hot water is distributed to several apartments, provides noticeable heating of the room. The warmth it maintains in the bathroom, where a separate heating radiator is often not provided, is never superfluous.

The heat emitted by a water heated towel rail prevents the mirror from fogging up and prevents the occurrence of mold, which often settles on damp surfaces

But such a dependence is fraught with the fact that if the hot water is shut off, the coil cools down, ceasing to perform its assigned function. In between heating seasons it serves only as a towel rack and decorative decoration rooms.

When hot water is supplied, the structure will begin to warm up, but rather slowly. And even during the arrangement autonomous water supply Every time you turn on the system, you have to wait for the pipe itself to warm up first, and then the bathroom room.

More convenient in this regard are electric models, which can be placed on any wall of the bathroom, with the exception of the space around water sources. But finding free space for an additional coil is not always possible.

And not many people are ready to allocate additional expenses to pay for the electricity necessary for the operation of the device.

When arranging an autonomous water supply, it is much more profitable to install double-circuit water heated towel rails in the bathroom, equipped with a heat exchanger

In dual-circuit devices, in addition to constantly flowing hot water, there is heated antifreeze, designed to evenly distribute heat throughout the radiator. The heat exchanger can be built into the overall structure, or taken out separately.

Double circuits are convenient because they allow you to regulate temperature regime. Additional coating of the internal walls protects the functional structure from sudden pressure changes and exposure to aggressive environments.

There are also combination models on sale that combine best sides water and electric heating devices

Thanks to the successful combination of quality characteristics of water and electric models, combined heated towel rails are able to operate uninterruptedly even in the absence of hot water in the system. The only drawback of combined models is their high price.

Requirements for pipes for a water heated towel rail

When choosing a water heated towel rail for the bathroom, focus primarily on the pressure level in the pipes. According to the requirements of GOST and current building codes, the pressure in the water intake fittings must be at least 6 atm.

In practice, water pressure in pipes varies from 2.5 to 7.5 Atm. And it depends mainly on the location of construction, the number of floors in an apartment building and the quality of the communications themselves. In private homes, the pressure in pipes rarely exceeds 2-3 atmospheres

Therefore, before purchasing, it would be useful to find out the indicators of the water supply system, adding several positions to the obtained value as insurance against possible water hammer.

The “power” of a water heated towel rail largely depends on the unrolled area of the pipe used for its manufacture. The ladder-shaped design is good because, with the ability to give off maximum heat, it can easily withstand water hammer.

The ideal option with maximum heat transfer is a chrome-plated ladder-shaped circuit, consisting of a pair of thick pipes with thin crossbars laid between them

When choosing a dryer, pay attention to the diameter of the pipes. You may need to purchase a special adapter to install and connect the device. Indicate these parameters to the consultant, and he, in accordance technical features products will help you choose the best option.

How to choose a water heated towel rail correctly?

The heated towel rail determines the level of warmth and comfort in the bathroom. Therefore, you should not install the first device you come across. Fortunately, the variety of assortment allows you to choose a model that will successfully combine operational parameters and aesthetic qualities.

Material of manufacture

Traditional clothes dryers made from unpresentable materials cast iron pipes, covered with a thick layer of oil paint, have long been replaced by the so-called “design radiators”.

The main color of modern models of “design radiators” is metallic silver, although water heated towel rails are also available white

The manufacturing material for such devices is:

protected black steel;
stainless steel;
non-ferrous metals (aluminum, copper or brass).

Dryers made of black protected steel are easily susceptible to corrosion, so products made from this material are more valuable when installing country houses, where an autonomous heating system is provided.

Non-ferrous metals are also famous for their good heat transfer. But the service life of structures made of non-ferrous metals is limited to 5-10 years.

Towel rails made of copper or brass are quite attractive and are a worthy decoration of the bathroom interior

If we talk about structures made of non-ferrous metals, they are more likely to be preferred due to their interesting appearance. Due to the precipitation and dissolution of impurities during the operation of the brass product, wear of the material will be visible on the bends and walls of the structure even after the first five years of service.

Matte materials in noble shades look harmonious in bathrooms decorated in a classic style, as well as modern or art deco.

The most popular, although the most expensive, are stainless steel heated towel rails. As a rule, seamless pipes without seams with a wall thickness of 3 mm are used for their production. Due to this manufacturing method, the product acquires high stability to the aggressions of hard water and pressure changes.

To give external presentation, stainless steel products are additionally polished or chrome-plated.

Regarding the price issue: painted models are more affordable, while purchasing a polished device can “hit your pocket.”

Shape and size of the structure

The shape of the water heated towel rail for the bathroom is also important. Modern leading manufacturers offer the following product configurations:

Classic models shaped like the letters “P” and “M”, as well as combined versions of “PM”;
“S”-shaped products that look like a bending snake;
Modernized models equipped with one or two shelves;
Decorative designs in the form of ladders, drops, loops and cascades.

On sale are wide and narrow models, large designs and compact heated towel rails equipped with miniature shelves. The choice is limited only by your preferences and the amount of funds that you are willing to allocate for a much-needed attribute in your household.

Designer design

The appearance of modern towel dryers can be both banally simple and pretentiously complex. Depending on those involved in the design finishing materials and the color palette that sets the tone for the bathroom walls, you can choose products in matte colors or silver shades.

A water heated towel rail made with mirror chrome plating can add a touch of sophistication and sophistication to the interior.

If there are metallized decorative elements in the interior, designers recommend choosing chrome equipment. The “multiple” arches and circles equipped with shelves are quite roomy.

If the bathroom design does not include chrome parts, and a light arch or ladder fits harmoniously into overall design, it is more advisable to choose a painted white model. Dryers that look like a sine wave look elegant.

Don't get carried away with overly elaborate options. They may become fashionable in just 2-3 years, but time-tested classics will delight with their laconic forms for several decades.

Imported or domestic?

Both domestically produced water heated towel rails and their foreign analogues are in great demand on the market. Finnish, Italian and German brands deserve special attention.

Customers are offered many options, from traditional budget designs to premium products.

When choosing models from a European manufacturer, you should take into account the fact that most of them are designed for connection to a heating system. Products from domestic manufacturers are more focused on connecting to hot water supply.

Traditionally, European manufacturers use thin-walled steel as a manufacturing material, the inner walls of which do not have an anti-corrosion coating. European manufacturers The quality of water circulating through drains is not always taken into account.

It is no secret that hot water supply uses water that contains chemical impurities, mechanical suspensions, and salts. These compounds can cause corrosion of steel, and the suspended matter deposited on the walls reduces the internal diameter of the pipes. The places where the structure bends “suffer” especially from this.

The catch is that the water coming from the water supply is without oxygen, and the coolant coming from the boiler is enriched with it. Therefore, if we take this parameter into account, it is still better to choose a domestically produced water heated towel rail, adapted to the “harsh” conditions of our communications.

The high rating of stainless steel heated towel rails has caused many counterfeits to appear on the market. Low-quality metal, sensitive to impurities, quickly loses its performance properties and simply has to be replaced.

You can insure yourself against low-quality products by giving preference to trusted manufacturers. In addition to the “famous” brands on the market, there are always “strong middling” brands that, although they do not produce “technological” breakthroughs, always maintain the quality of their products at the highest level.

To purchase a quality product, pay attention to the design of the welds, threads on the ends, coating, as well as the availability of appropriate certificates for the products

In addition to the warranty card, the device must include a hygiene card with the specified name manufacturing company.

Knowing all the subtleties of choice, you can easily select a water heated towel rail model that will delight you with its presentable appearance and excellent quality for many years.

Nowadays, any plumbing accessories are no longer in short supply; on the contrary, in specialized stores you can find such a variety of them that many consumers are lost, not knowing which model to choose. Heated towel rails were previously not considered a necessary attribute of the bathroom; they were often dismantled in an attempt to expand the space of the room, since they took up quite a lot of space on the wall, protruding from it by 130–150 mm. In addition, those “official” heated towel rails had an unaesthetic appearance that did not fit well into the updated bathroom design. Today you can find similar devices that have various sizes and configurations, and they are easy to match to any bathroom design. In addition, it became possible to independently choose the installation location of this accessory and allocate a certain area for it, without compromising the placement of other plumbing and household appliances and pieces of furniture.

To know how to choose a heated towel rail from all the available variety, you need to consider various criteria that are worth paying attention to. This modern accessory can be installed not only in the bathroom, but also in any other, depending on the choice of model.

Many regions of Russia have a climate with high humidity, in which it is difficult to quickly dry items of clothing or towels, so heating radiators are often used for this purpose. But by hanging laundry on them, the owners cut off the flow of heat into the room, so they have to choose between quick-drying clothes and a comfortable environment in the living room.

It is in this case that a device that can not only dry clothes, but can also increase the temperature in the room and reduce excess humidity can come in handy. Thanks to all the capabilities of a modern heated towel rail to ensure comfortable living, it is becoming increasingly popular both for apartments with small bathrooms and among owners of private houses.

Heated towel rails can be divided into types based on several criteria - material of manufacture, design, heating features, shape and design solution. If you take a quick look at these points, it becomes clear why the buyer is often lost when choosing this accessory.

Classification by heating type

According to the type of thermal energy used, heated towel rails are divided into water, electric and combined. To understand how they work and which one is more profitable to choose, you need to familiarize yourself with their structure and characteristics.

Water heated towel rails

This type of dryer operates from a central hot water supply system in an apartment. In a private house, a heated towel rail can be connected to autonomous heating or hot water supply, if these systems are not combined with a double-circuit boiler.

Since drinking hot water or high-quality coolant from an autonomous heating system will pass through the pipes of the heated towel rail, such an aggressive environment will not be created inside the dryer as in radiators. But despite this, even pure water is capable of creating lime deposits inside pipes, which destroy the metal and cause corrosion. Therefore, it is necessary to choose a product made from the most resistant material to these processes.

The diagram shows the connection of a simple-shaped towel dryer, but the installation principle remains the same for products with more complex configurations.

The disadvantage of a water heated towel rail operating from hot water supply is that in the summer the hot water is turned off at certain period, for carrying out preventive work.

IN autonomous heating, operating on gas, the dryer can also be used only during the heating period, or you will have to keep the gas for the hot water circuit constantly on, if this function is included in the design of the boiler.

Most often, a water dryer is connected to the hot water supply using American union nuts using a sealant in the form of fluoroplastic, rubber or paronite gaskets for waterproofing, which must be periodically replaced to avoid leaks.

In addition, you need to know that if you plan to move or reinstall the dryer on an adjacent or opposite wall from the central hot water supply riser, then for this it is better to choose a heated towel rail made of stainless steel, which is already equipped with a “Mayevsky tap” with a drain valve. Thanks to its presence, there will be no problems with the first start of water into a newly installed dryer, as well as when turning on the hot water supply after seasonal preventive shutdowns. By opening the valve of this tap, you can easily free the pipes from air pockets and normalize the circulation of the coolant.

Electric heated towel rails

This type of towel dryer runs on electricity, so it does not require a water supply. You can hang or install this product in any of the rooms, if desired. In addition, unlike the water version of the dryer, the electric one can be used as needed, since the functioning of the product depends only on the availability of power.

The surface temperature of the pipes of this device is a maximum of 60˚, so it is safe, and its energy consumption is comparable to a regular 100 W light bulb. In this regard, the payment for electricity when using the heated towel rail periodically will rise insignificantly.

The source of thermal energy can be a heating cable...

The pipes of the device are heated using a moisture-proof heating cable or a special tubular electric heater (TEH).

... or built-in heating element

“Dry” heated towel rails and oil heated towel rails are produced, operating like oil heaters, which retain heat for quite a long time even after they are turned off, due to the high heat capacity of the coolant that cools long time.

In dry-type heated towel rails, a special cable is installed inside its pipes, which is the main heating element. They are considered more reliable in operation than those heated by heating elements.

The device can be connected in a hidden way, when the cable is embedded in the wall and brought to the distribution box, where it is built into the general apartment power supply. Such installation may be possible if the heated towel rail is equipped with a special control unit on which it is turned on and off, as well as installation desired temperature Heating element or cable, varying from 25 to 70 degrees.

Such devices have a double protection system, therefore, when they heat up to the desired state, or if the program fails, they are disconnected from the network.

In addition, electric dryers can have open wiring. In this embodiment, the power cord usually runs from the appliance to a regular outlet.

Models are produced with higher or lower power, which varies from 25 to 1200 W. Of course, the size of the heated towel rail plays an important role in this parameter.

It should be noted that if you follow all the rules for installing wiring, insulation, grounding and connecting to a safety circuit breaker, as well as including an RCD in the circuit diagram, an electric towel dryer will be the most optimal and absolutely safe option, comfortable to use. An important condition installation is correct location such an electrical appliance relative to the water intake taps, that is, a bathtub, shower cabin or sink - this distance must be at least 600 mm.

The heated towel rail can be installed in the kitchen, insulated balcony or bedroom. It will multiply the heat emanating from the radiators or even warm up small room, where there is no heating at all.

Combined heated towel rails

Combined heated towel rails are devices that operate on both hot water and electricity. This system allows, at a time convenient for the user, to switch the dryer to a mode that is beneficial to the owners for use at the moment. When hot water enters the apartment from the central system, the power supply from the device is turned off. During preventive maintenance or in emergency situations on central hot water supply lines, drying and local heating can be ensured by connecting the device to the power supply.

1 - pipe of the water heating circuit.

2 - electric heating section.

3 - threaded coupling connection for insertion into a heating or hot water system.

4 — power cord.

5 - some models are equipped with a swivel connection between the water and electric heating circuits.

This type of dryer can be called the most practical option, since you can use two sources to heat the bathroom.

The water in the heated towel rail, switched to power supply, is heated using a heating element built into the design. Therefore, when installing this appliance, you must follow all installation rules recommended for both water and electric towel dryers.

When switching the heated towel rail to electricity, it is closed at the inlet and outlet of the coolant with taps specially designed for this purpose, so that the coolant does not leave and is not diluted with the incoming cold water. When the water flow is blocked, the heating element will heat only the amount of water that is in the pipes of the heated towel rail. If a thermostat is installed on the device, then a large amount of electricity will not be consumed to heat the coolant.

Materials for making heated towel rails

For the manufacture of heated towel rails, both water and electric, several different metals and alloys are used, which differ in composition and, accordingly, react differently to an aggressive environment - these are stainless or ordinary “black” steel, copper, brass.

Stainless steel

Stainless steel heated towel rails have a number of advantages over other materials if they are made from solid, seamless pipe. Such a heating accessory is able to withstand high operating pressure with significant differences, which sometimes occur in multi-storey buildings connected to a central hot water supply.

The most common are stainless steel heated towel rails

To purchase a reliable water or combined stainless steel heated towel rail that can serve you for a long time without problems, when purchasing it you need to pay attention to the thickness of the pipe walls. It should be at least 3 mm, since the thicker the metal, the longer the service life of the product, and also the higher the heat transfer. A heated towel rail made from a pipe with a diameter of one or ¾ inches is capable of independently heating the bathroom of a standard apartment.

It should be noted that a stainless steel heated towel rail is quite heavy, but its price is more affordable than products made from many other materials. Stainless steel dryers can have a chrome-plated or painted surface, as well as a coating that imitates bronze or brass. You should not purchase options that have too much low cost, since they may have various defects at the pipe joints.

Black steel heated towel rails

Towel dryers made of “black” steel, the pipes of which do not have an internal anti-corrosion coating, are quite capricious towards the coolant and do not tolerate the aggressiveness of the aquatic environment. Therefore, it is recommended to install them only in an autonomous heating system in which there is no high pressure and no pressure drops. To connect to central system hot water supply, you must definitely choose a heated towel rail that has anti-corrosion internal protection.

Dryers made of “black” steel are cheaper, but require special care when choosing due to their low corrosion resistance.

The only advantage of such heated towel rails is their low cost compared to all other options.

Copper heated towel rails

Copper has very high thermal conductivity and resistance to corrosion. Copper heated towel rails heat up quickly, are lightweight and quite easy to assemble. This type of accessory can be installed in a central hot water supply system if inner surface The pipes are galvanized, that is, protected from direct contact with the aquatic environment.

This type of dryer is produced in various forms, but they all have a fairly aesthetic appearance, so they can easily become a decoration for any interior. Water models of copper heated towel rails will last longer if they are installed in autonomous system heating or water supply.

Electric copper heated towel rails can be installed both in apartments and in private homes.

Brass heated towel rails

Brass is a copper-based alloy that has excellent thermal conductivity and corrosion resistance. Brass towel rails often have a chrome-plated interior to help extend the life of the product.

The Russian market mainly offers imported brass heated towel rails, and they are not always designed for the pressure created by our boiler rooms in central hot water supply systems. Therefore, it is better not to take risks and refuse installation similar option in a city apartment with a connection to the hot water supply. But a brass heated towel rail is perfect for installation in a system operating in autonomous mode, where pressure drops are simply impossible.

The advantage of brass products is the rich variety of shapes and designs.

Heated towel rail designs

Based on their construction and design, dryers can be divided into several types and shapes. Before making a choice, you need to familiarize yourself with this criterion, as well as with their connection options.

Connection options

Water heated towel rails can have different scheme connections to hot water supply, therefore, when purchasing such a device, it is necessary to provide for this factor to make its installation easier. So, according to the installation method, these accessories can have:

Bottom connection.
Top connection.
Angular water supply.
Side connection (left or right)

The most practical and optimal is the side connection, since models with this design can be adapted to any installation location.

This installation option will help make the connection point almost invisible, so the type of connection will not spoil the interior design.

It is necessary to clarify the center-to-center distance between the DHW connection pipes if you do not plan to re-pipe. Typically this parameter is 500 mm, but there are exceptions. You definitely need to take this into account when you go shopping.

Varieties according to installation location

Heated towel rails come in wall and floor types, as well as stationary and rotary.

Wall clothes dryers

The “classic” location of the heated towel rail is on the wall of the bathroom

Wall-mounted heated towel rails are among the most popular, as they have their own advantages, which include the compactness and variety of shapes of this type of device. They are produced in different sizes, so they can occupy a very small part of the bathroom wall, and in a place where they will not interfere with undressing before taking water procedures.

A heated towel rail in the bathrooms of standard apartments is usually installed on the wall opposite the bath or shower stall itself, but this is not always convenient, since it protrudes from the wall at a certain distance, and thereby reduces the area of an already small room. The dimensions of modern models allow them to be placed in any convenient place, but subject to certain safety measures that should be followed when installing both electric and combined dryer options.

Floor heated towel rails

Floor heated towel rails can be electric, water or combined, depending on the installation location. If the dryer is mounted far from the water supply, for example, in the hallway, then, of course, choose electric version device. When installing in a living room or bathroom, you can use a water or combined product, since the hot water supply and heating lines run there.

There are dryers combined with a radiator that connects to common system heating the room, but is installed not under the window, but near a wall that does not have window openings.

If the bathroom space allows, or when remodeling two bathroom rooms into one room, the dryer can become a divider into zones, and it is installed not along the wall, but as a partition. This option is quite original and functional. The dryer will not only tidy up towels and bathrobes, but will also additionally warm the room, becoming a kind of radiator.

There are quite a few models of electric dryers that can be installed in hallways. They are turned on as needed to create a kind of “thermal curtain” that blocks the movement of drafts coming from front door, drying wet clothes and even shoes. The convenience of the floor-standing version of the heated towel rail is also convenient because such a design is mobile and can, if necessary, be moved without much difficulty to any of the rooms, including the bathroom, to increase the temperature in the room. This is especially necessary at a time when it is already quite cold outside and the central heating has not yet been turned on.

Stationary and rotating heated towel rails

Water rotary heated towel rails are equipped with a special mechanism that helps rotate its individual elements 180˚ relative to the stand. Despite the ease of use of this type of dryer, it is considered less reliable than a stationary one. Rotary mechanisms are equipped with rubber sealing rings that tend to wear out quickly, which can result in fluid leakage.

How long the gaskets will last depends on the quality of the coolant and the weight load applied - the number of towels or bathrobes that will be hung on the heated towel rail. Therefore, water models with a rotating mechanism are not very popular.

The trouble-free operation period of such dryers is short - no more than 3 years. Therefore, if you definitely want to install a rotary towel dryer, then you can use another option. An additional removable rotating mechanism that is not connected to the water flow is installed on a permanently mounted heated towel rail. It can consist of two or three slats on which you can safely hang towels, and they will not affect the design or the quality of its work.

The design of an electric rotary heated towel rail is more reliable than the water version, since no coolant passes inside the pipes, and the heating cable is sufficiently protected and elastic. Therefore, such dryers are more readily purchased by users. The convenience of rotating models is that things hung on different elements that are installed in different positions will not overlap each other, which means that they will dry faster.

Elements in their normal state can be pressed against the wall and will not take up extra space, and if necessary, individual parts can be rotated to the desired position.

Shapes of heated towel rails

In addition to the usual forms of coil-shaped dryers, designers are developing more and more new configurations of these devices, trying to surprise and thereby attract the consumer. This variety allows you to choose a heated towel rail to suit every taste and need. various styles interior of a bathroom or other room.

Among the variety presented, you can find the following forms:

The e-shaped dryer looks neat, elegant and modern, without frills.

The U-shaped option is perfect for the minimalist style, it looks unobtrusive, aesthetically pleasing, and does not take up space. large area walls.

M-shaped, resembling a snake and a shape familiar to many, similar to those dryers that were previously installed in all high-rise buildings.

Heated towel rail - “snake”

The “snake” heated towel rail looks especially interesting on dark finish walls, and is not only functional, but also a decorative accessory for the bathroom.

Devices shaped like a “ladder” are very popular.

The “ladder” dryer can be called the most popular option, since it can most often be seen in indoor interiors. Such heated towel rails are produced in water, electric and combined options, so they can be selected not only for the bathroom, but also for the hallway or bedroom.

A heated towel rail with a shelf built into one of its parts is convenient because you can hang or put things on this protruding lattice element, around which air can circulate freely, which will allow them to dry much faster.

In addition, on the top shelf you can store clean, dry towels, which will always be warm and pleasant by the time the water procedures are completed.

An electric version of a dryer with a shelf can be placed in the hallway; it will be convenient to dry shoes on it.

There are other forms that are more complex, but they are based on the simplest configurations mentioned above.

Design styles

In addition to the variety of forms, it is worth mentioning the main design directions in which modern heated towel rails are designed. It is necessary to select them according to this criterion, based on the overall style design of the room where they will be installed.

The following series of dryers are available on the modern market in a wide range:

Premium

Premium heated towel rails are designed for installation in bathrooms designed in different styles, as they have a variety of shapes and coatings. These dryers are made from high quality materials and have an impeccable appearance and design. They are intended not only for drying wet towels, but also to decoratively transform the room in which they are placed, emphasizing its style.

Lux

Luxury models will suit any style of bathroom interior

Luxury design dryers are usually used in a classic style and are most often installed in various rooms of apartments and private houses. The products fit perfectly into interiors and highlight them with their nickel-plated shine. Luxury heated towel rails are quite expensive because they have high quality materials and assembly. They have a respectable appearance and can become a real decoration of the wall of the room.

Retro

Retro versions of heated towel rails usually have a brass or bronze finish, as well as special shapes that give them the illusion of antiquity. Such dryers will look great next to bathtubs on bronze claw-shaped legs. It is advisable to decorate the room where such a dryer will be installed with door handles and other elements that have the same coating and outlines close to this style. It should be noted that such devices are quite popular and in demand, as they will decorate any room with their presence.

ECO-versions of heated towel rails have simple shapes and are usually painted in various colors. pastel shades surfaces. These dryers are installed in simple interiors and do not stand out among all the accessories, but, on the contrary, fit organically into the design of the room, performing only their immediate functions.

Criteria for choosing a heated towel rail

Having understood the features presented above and starting to choose the right model, you need to answer yourself a few questions that will determine what kind of dryer you would like to purchase:

Which type of heated towel rail is preferable - water, electric or combined? The answer to this question will depend on the installation location of the device and on the desire to have a stationary or mobile version of the dryer.
Which option will be more comfortable to use – a dryer with rotating elements or one rigidly fixed in one position?
What material would you like to have a heated towel rail from?
Is there a need to select a heated towel rail for the interior design, or will a simple one be suitable? economical option? Although the latter can easily fit into the most expensive interior, choosing it according to the color scheme.
You must immediately determine the connection method, since an error in this parameter can significantly complicate further installation work.
What price for this product seems acceptable?

Having answered these questions for yourself, you can move on to selecting a model that is suitable for all parameters, either in a regular plumbing store or in online catalogues.

When purchasing a heated towel rail, you need to check its completeness and be sure to check the documents attached to it. Typically this product should be accompanied by:

Technical certificate
Hygienic certificate
Quality certificate from the manufacturer
Installation instructions
Recommendations for using the device
Warranty card, which must be filled out by the seller on the day of purchase of the heated towel rail.

If you plan to purchase a water heated towel rail that will be connected to a hot water supply or central heating system, then it is necessary to carefully study the technical passport when checking the documents. In it you need to find information about the fundamental possibility of such a connection, since some options are designed only for installing the product in an autonomous system. If you do not take this point into account, at the first connection you may be left without a new heated towel rail and the money spent on it, and even get a plumbing accident as a “gift”.

Taking into account all the pros and cons, you can choose exactly the option that will meet all the requirements and ideally suit the design of the room.

For example, here is a short overview of models, water and electric, from the simplest to the premium class.

Model	Short description	average price
“Sunerja Elegy” (“Eleg-el”)	Electric heated towel rail made of stainless steel with chrome finish. The shape of a three-dimensional staircase. Wide selection of shades. Size range from 6000×400 to 1200×600	Depending on the size - from 16,500 to 24,400 rubles.
"Galant M-3"	Water type. Straight ladder with top shelf. Connection, optionally, side or top. Vertical posts – 25 mm, jumpers – 20 mm. Connection - “American” ¾". Chrome mirror finish. Size range from 500×400 to 1200×600 mm. Heat dissipation – from 182 to 494 W.	Depending on the size - from 5900 to 9500 rubles.
"Fashion M"	Water M-shaped heated towel rail made of stainless steel. Pipe diameter – 25 mm. Size range – from 320×400 to 600×800 mm.	Depending on the size - from 2900 to 3500 rubles.
"Terminus Europe"	Water type, stainless steel, original arrangement of jumpers alternately on the left and right. Dimensions 1030x640 mm, connection ¾", "American", bottom. Heat dissipation 295 W. Built-in Mayevsky faucet.	16900 rub.
"Energy U-G3"	Electric heated towel rail. Three U-shaped 180° rotatable sections. Operation indicator light. Dimensions 630 × 770 × 100 mm.	12200 rub.
"Terminus Niagara"	Water heated towel rail of non-standard design. Designed to work with central heating systems or hot water supply. Six cascaded sections. Connection – horizontal, center distance – 200 mm. Dimensions: 850 × 930 mm.	13,000 rub.
"Tiffany World TW800GVS bronze"	Premium water heated towel rail. Suitable for central heating or hot water systems. Material – brass with external finishing under bronze. Regulating valves at the inlet and inlet have a “retro” look. Dimensions: 570 × 835 × 170 mm. Center distance – 500 mm.	83,000 rub.

And at the end of the publication - video material, which will also be useful when choosing optimal model heated towel rail:

Video: how to choose the right heated towel rail

A heated towel rail is a device designed to dry wet towels and reduce humidity in a room; in addition, it heats the bathroom. This device cannot be called a heating device, because hot water runs through it, and not the coolant of the heating system; in city apartments it works regardless of the season - all year round. In winter it serves as additional heating. Heated towel rails are installed in addition to the main heating to dry things in small rooms or corridors.

Features of heated towel rails

A water heated towel rail uses water as a coolant, and its operation can depend on many reasons. Devices can be divided according to the type of connection to the system - top, bottom, side, throughput speed coolant, power and material of manufacture.

Structurally, a water heated towel rail is similar to a heating radiator, which is pipes of different or identical diameters, welded into a multi-channel heat exchanger. A correctly installed water heated towel rail does not require constant monitoring in the future; the technical parameters of the device correspond to the specifications heating radiators. He becomes complete efficient heater, without adding economical costs to the system central heating.

By appearance water heated towel rails are:

Standard, having the form of a curved pipe, shaped like the letters “P” or “M” with a small heat transfer of about 0.5 kW.
Modernized with shelves (improved conventional heated towel rails).
Elegant, representing devices original forms such as ladder, foxtrot and others.

Water heated towel rails can be manufactured:

Stainless steel. For domestic conditions, this is the best choice. The outer part of such devices can be chrome-plated, painted, or polished.
From non-ferrous metals. Such devices have a short service life due to their exposure to water aggressiveness at high temperatures in heating and hot water supply circuits and the presence of harmful impurities that destroy pipes.

What to look for when choosing

Before purchasing a water heated towel rail for replacement in a riser, you need to inquire at the housing office about the pressure in the water supply system, and select a device so that it corresponds to this parameter.

When buying a heated towel rail, in addition to appearance, you need to pay attention to the following issues:

With this in mind small instructions You can safely go to the store and choose the heated towel rail you like.

Video instructions for choosing a heated towel rail

Review of the most popular brands - models

Today there is a large selection of water heated towel rails of various types on the market. It is very difficult to immediately decide among the commercially available devices when all of them suit your technical parameters.

St. Petersburg company "Sunerzha" produces water heated towel rails from simple models to designer designs. The products of this company are reliable, durable, and made of stainless steel. Technical specifications devices fully comply with SNiP. Pipes are purchased abroad and in the production process at each technological stage checked for integrity from exposure to high pressure. The devices are fully adapted to the central heating system and can withstand temperatures of 105˚C, and are designed for pressures from 3 to 25 atm. They can be installed not only in the bathroom, but also in the hallway, kitchen and other small rooms.

To give a mirror-like appearance, finished goods polished in several stages. Heated towel rails can also be painted in various shades using a special spraying technology to give them an even more elegant look.

The simplest types of products are U-shaped heated towel rails, with a power of 0.5 kW and a price starting from 1800 rubles.

One of the most popular devices is water heated towel rail "Elegy", which is a gracefully curved coil. All elements are located in different planes, and this makes it possible to dry household items more efficiently. The heat output of such devices is from 230 to 621 W, and the size range starts from 60*40 cm and ends at 120*60 cm. Prices accordingly start from 7500 rubles. up to 13,500 rub.

Series "Galant" These devices are also popular. Its traditional appearance, arrangement of jumpers, and practicality do not leave the buyer indifferent. The company produces 14 types of this model, differing in size. They can be selected for a room of any size, device sizes from 50*40 cm to 120*60 cm, corresponding to heat transfer from 183 W to 568 W. The price is also attractive - 6,800 rubles. for a smaller size and 13,700 rub. - to a larger one.

Basis of the series “Bohemia” - elegance and functionality of lintels. The device is available in 16 sizes and can be equipped with a shelf. Made of food grade stainless steel, it can withstand pressure from 3 to 25 atm and coolant temperature up to 105˚C. The minimum size is 50*30 cm, and the maximum is 120*60 cm, power respectively from 197 to 834 W. The price of this series starts from 8200 rub. for a small size and ends at RUR 17,900. to the biggest one.

The “Furor” series looks unusual, having a size range from 60*60 cm to 100*90 cm, with a price correspondingly starting from 9,100 rubles. up to 13,000 rub.

Production Russian company "Nika", one of the leading manufacturers of stainless steel heated towel rails, places high demands on its products. Each device is tested for strength by water pressure of 40 atm, application plasma polishing makes appliances dazzlingly shiny, adding a feeling of comfort and cleanliness. The company's assortment includes 1,400 standard sizes, 53 models. These can be devices with shelves, hangers, “P” and “M”-shaped, as well as mixed types.

Budget coils "Nika" can be with bottom, top and side connections. The most inexpensive P 1 32/80 costs 1600 rubles, made in the form of the letter “P”.

Coils of type M 1 60*40 and other sizes cost from 1650 rubles. They are made of stainless steel and designed for small bathrooms, they have a classic M-shape. These devices are designed for operating pressure 3−25 atm, heat dissipation 125 W, side connection, warranty period 5 years.

The improved mixed model PM 1 60/40 already has a high heat output of 232 W, with a wall thickness of 2-3.5 mm and plasma polishing, costing 2,690 rubles.

In the middle price segment there are options for ladders with arched lintels of the L.D. type. Price These devices start from 6,000 rubles., heat output 260 W, heated area 3 sq. m, test pressure 40 atm. A bend ladder of the same heat transfer type L Z will cost the buyer a little less, the price of which starts from 4,960 rubles. and ladder L90, costing 5,120 rubles. with the same technical parameters.

The more expensive ones include heated towel rails of new design developments, for example, Nika L.B. 1 60/50−7, available in three running sizes, costing from 9,000 rubles, with a heat output of 400 W.

Another Russian company produces heated towel rails of modern design - this AquaStal company. The company has been using new equipment using the most advanced technologies for a long time. The material for the manufacture of heated towel rails is food-grade imported stainless steel, which is highly resistant to corrosion processes. Strength test produced 2 times under a pressure of 25−50 atm.

Economy class water heated towel rails Margroid, view 35 itself simple type cost from 800 rub. (32*40 cm), with increasing size the cost increases (50*80 cm - 1250 rubles). Mid-price heated towel rails Margroid, type 24 cost from 1,650 rubles. (32*40 cm) and above.

So-called premium class heated towel rails cost more than 3,500 rubles. and have original look, such as Margroid 11 A, with a starting price of 7,340 rubles. (60*60 cm). There are devices on the market made not only by representatives of these companies, but also by many others. And basically this is quality products, suitable for our conditions of thermal systems. All you have to do is decide on the required heat transfer for your room and the appearance that is acceptable to you.

In the online store Studio Heat wide range of water heated towel rails.
Buy a thermal curtain piping unit in Moscow