Modern moldings are economical way replacement of stucco molding with the opportunity for everyone to create an interior with stylish and bohemian forms. What is molding?
Molding is a decorative detail in the form of a strip; its task in the interior is to bridge gaps, zoning, i.e., to separate different types finishing materials or protection from damage.
Materials for production
Moldings differ both in the method of application and in the type of material from which they are made. A fairly wide range of materials are used for their manufacture. Let's look at them, sorting them by type and weight of material - from lightest to heaviest.
Foam and plastic moldings. These foam products are the most popular on the market. First of all, they are cheap. Secondly, their popularity came thanks to low weight, lightness and moisture resistance. But foam moldings also have their disadvantages: they differ weak strength and ease of damage. Plastic moldings have almost the same pros and cons.
Polyurethane moldings can have different patterns Polyurethane moldings. This type of molding is increasingly being used in interior design. They fit great, look great and don't break. Special bendable structure allows polyurethane moldings to take on any shape. In addition, such moldings attract the buyer cheap prices.
Wood moldings. Wood, as you know, is valued not only for its pleasant appearance, but also for its environmentally friendly material. His high price only emphasizes their sophistication. Therefore, wood moldings are always held in high esteem.
Marble, plaster and metal moldings. Such moldings look extraordinarily beautiful, but they used quite rarely. Moldings made of plaster, metal and marble are usually used in interiors to create historical styles. If you use these, we will immediately see their most main drawback – high price and heavy weight.
Such decorative plaster moldings will decorate the wall and add special splendor to the interior. Note! Self-adhesive molding will be a real gift for any buyer. It is most often made of plastic and rubber. A striking example of such molding will be curb tape, which is made of rubber.
Widely known and groove molding. The first one is most often used to connect the bathroom with the walls, and the second one is used exclusively as a decorative one.
See the selection and possible options design with them: solid, compact and modular walls of the slide - this multifunctional and compact furniture will become ideal solution for your hall or living room.
In conclusion, it should be noted that moldings on walls in the interior are a time-tested method of finishing rooms. Don't be afraid to work with these products. Moldings have been used for quite a long time, they are just called differently now, and for their manufacture they use more and more new materials that technological progress gives to society.
Plain and empty walls without unnecessary pictorial elements - this is universal option design, but for creative personalities such an interior is not enough. Then they come to the rescue wall moldings– overhead decorative panels.
The variety of shapes, widths, lengths, and materials makes this decoration popular and modern. The main thing is to know where, when and how to use it.
Briefly about the element
Wall decoration with moldings includes frames, baseboards, grooved strips, panels and stucco. Their functions include not only aesthetic, but also other aspects:
- Masking wall surface defects, flaws and irregularities;
- Dividing space into separate sections;
- Separating some wallpaper from others;
- Decoration of windows and doorways, niches and arches;
- Creating “fake” windows;
- Use as skirting boards to hide knocks between the wall and the floor or ceiling.
Some decorators expand the scope of use of frames and decorate furniture with them, design sockets and switches in order to fully create a conservative atmosphere of true classicism.
Types of decor
Depending on the style decision and ceiling height, certain decorative moldings are selected. Thus, there are convex, concave and flat models.
Convex panels with stucco molding, protruding ornaments and clearly defined frames are more often selected for classical and historical interiors. Volume is also added through spraying and overlay elements.
Simple straight lines are more suitable for minimalist designs, with preference given to neutral shades or those stylized as natural wood.
Concave models are a simple die with convex edges, creating the illusion of a recessed space. They are considered universal and suitable for decorating any room.
- Panels are also divided according to the material of manufacture, which can be:
- Plastic (most a budget option, has a wide color scheme and low strength);
- Foam plastic (lightness and high degree wear);
- Wood (noble natural texture, distinguished high quality and price);
- Marble or other stone (expensive, durable material that requires special care and reliable fastening);
- Polystyrene (resistant to sudden changes in humidity and temperature);
- Gypsum, drywall (only in white or color Ivory, durable and inexpensive);
- Polyurethane (environmentally friendly material does not absorb odor and moisture, is resistant to changes and painting, elastic and practically impossible to deform).
Each material has its own advantages and disadvantages, which should be discussed in detail with sales consultants or decorators. The latter will also suggest some useful tricks: in wooden panels you can cut grooves for electrical wiring and apply original carvings or paintings.
Design ideas
A quick transformation of the existing interior will be helped by a small decoration of surfaces, openings, walls and furniture with moldings. So, interior doors or the arches can be visually expanded by running strips around the perimeter and painting them in its corresponding color.
To visually increase the height of the ceiling and, accordingly, square meters small apartment The following method is used: two parallel straight lines with an interval of 3-5 cm are glued to the wall under the ceiling.
Application on walls different zoning decorative elements are the widest and most non-standard. For example, they separate the lower trim from the upper wallpaper, highlight special “fake” windows, or frame photographs, paintings, murals, posters and other wall compositions.
Also, in addition to decoration, moldings are also used as multifunctional items: shoe holders, shelves for books and magazines, stands for photographs and accessories, a platform for an alarm clock or a frame for a television panel.
In any case, care must be taken to ensure that the decor fits harmoniously into the interior and that it is securely attached to the base.
An excellent and unusual solution would be a transformation old furniture, masking some surface and facade defects, protecting sharp corners and fastening upholstery.
Mounting methods
Installation of most panels is simple and does not require special skill or effort. The main thing is that the surface is smooth, clean and dry.
The method of attaching the molding to the wall directly depends on the material of manufacture: screwing it with self-tapping screws or gluing it with a special solution. Relevant information is obtained at the purchase stage.
Some models are self-adhesive and have a special layer covered protective film. During repairs, the protection is removed and the panel is applied to the desired location.
If an adhesive base is not provided, then for gypsum, polyurethane, foam, plastic and polystyrene models, an additional polyurethane gel is purchased, which securely fixes and does not leave marks on the surface. Heavy wooden panels require more reliable fastening: self-tapping screws, nails, clamps.
Design secrets
Photos of moldings figuratively located on the walls attract attention, encouraging you to repeat the idea in your interior. But only if certain rules are followed, you can achieve a clear drawing and an ideal final result:
- An intricate pattern requires preliminary drawing of hints on the surface with a construction pencil;
- Moldings are painted before pasting;
- Snow-white panels will visually increase the space;
- Frames and baseboards must be supported in several places in the room at once;
- In spacious rooms, massive, wide and convex models are appropriate, while in small areas only narrow and straight options can be used.
Moldings on the walls can add zest and a new atmosphere to the interior, as well as hide imperfections in surfaces and visually expand square meters.
With their help, you can display the design on new level, zone the space, add sophistication and grace to the room, turning boring plain walls into a whole decorative composition.
Photos of wall moldings
Internet pages are full of modern and stylish interiors that you want to repeat in your apartment. Many designers began to use moldings to visually divide the space, which make the interior more expressive and bright. Curbs and finishing strips (moldings, Europlast) add some relief to the appearance walls, thereby forming a creative interior. So, if you want to decorate your home and give it a special, unique style, then read this article to learn how to glue moldings on a wall with wallpaper and add lightness and completeness to the decor. Decorating wall surfaces using borders is the most popular technique; in addition, the material is quite easy to work with and is inexpensive, which simplifies repairs. In our article you will learn what wallpaper framed with moldings looks like, how to hang wallpaper, the layout of moldings on the walls, bending from the wipe and how to install and separate them.
What are the benefits of using moldings?
Molding is a fairly broad concept; it includes stucco molding, baseboards, borders, finishing strips, mirror and picture frames, pilasters, columns, rosettes and complex decorative elements.
Moldings are used for various purposes in interior design. With the help of modern molding you can:
- Hide gaps.
- Frame doors and mirrors.
- Decorate the walls and ceiling.
- Break wall surfaces into separate sections various shapes for zoning space.
- Protect the walls and wall covering from damage, for example from being hit by a door handle.
- Disguise unsightly details and poor quality finishes.
- Change the shape of space. Low ceiling and other architectural shortcomings can be corrected by creating a visual illusion with the help of semi-columns tending upward or rosettes decreasing in size as they approach the center.
- Create any architectural style indoors. For example, snow-white columns and pilasters, gilded borders with ornaments will turn the room into a Greek temple or a European palace.
Important! Molding is an applied decor that can be used to add volume and relief to a standard interior.
What are moldings made of?
On modern market decorations are made to suit every taste and color. Products differ in shape and material of manufacture. The most common decorative elements are made from the following materials.
Polyurethane
Plastic products are especially popular due to the best price-quality ratio. Polyurethane molding has virtually no disadvantages, but there are plenty of advantages:
- Strength and durability. Products with additional treatment with a special composition can last more than 30 years.
- Elasticity. Thanks to their flexibility, they can easily take any shape.
- Moisture resistance and resistance to temperature changes. Thanks to this quality, plastic products often used to decorate bathrooms.
- Easy to install and maintain. The smooth surface does not create problems when washing the plank.
- Low cost.
- Wide range of colors.
Important! Surely you will not leave the walls of your room empty, but will want to decorate them upon completion of the renovation. And there will definitely be remnants of moldings that can be put to practical use. Take advantage of our master classes to create an original design with your own hands.
Polystyrene (foam)
Foam moldings can hide unsightly details and decorate an empty wall. Polystyrene foam is not as durable as other materials, but it has its advantages:
- A light weight.
- Low price.
- Moisture resistance.
Important! This material is for those who want to create beautiful interior, but does not want to spend money.
Tree
Wood molding is much more expensive than its artificial “brothers,” but it easily pays off in an attractive and aesthetically pleasing wood Wooden crafts strong enough, but afraid of moisture, so they are not used for rooms with high humidity. Besides, heavy weight During installation, it requires strengthening the strips with self-tapping screws.
Important! If wood molding is treated with an antiseptic and water-repellent, it will last for quite a long time.
Gypsum
Products made from gypsum are easy to install, durable, do not turn yellow over time, can be easily restored and are safe to use. And their beautiful appearance and richness of relief forms have made them in demand since the Renaissance.
Disadvantages: gypsum products are not flexible, are expensive, heavy and hygroscopic.
Important! If you are still thinking about the final design of the room, take note useful information from these articles:
Metal
Metal products are mainly used to decorate the corner of a step or threshold. Install metal molding with additional fastening, connecting the corners with the cladding.
Important! Self-adhesive moldings made from various materials. Particularly popular is rubber border tape, which is used to connect the bathtub to the walls. No less popular is groove molding, which serves as a decorative element, and its installation does not require much effort.
What other types of moldings are there?
According to their shape, moldings are divided into the following types:
- Cornices. Products are intended for camouflage window frame or cornice. The models are simple and have a simple shape.
- Skirting boards. The products have a round or semicircular cross-section and are suitable for masking joints between the wall and the ceiling.
- Baguettes. Decorative, textured strips are intended for decorating panels, paintings, mirrors, shelves and other elements. You can also use .
- Compositions. These are ready-made decorative solutions in the form of arches and rosettes.
Features of installation of moldings
Moldings are glued to any surface, in particular:
- For door and window openings. This decor option will allow you to create a complete composition and comfort in the room.
- On the surface of the wall. In this case decorative strip can perform several functions: zone space, decorate the interior, protect corners from deformation and rubbing.
- On the ceiling surface. This method will visually raise the height of the room and make it more spacious.
At making the right choice material and glue for installation, you can achieve excellent results and the molding will not only become finishing material, but an excellent addition to the interior.
How to glue the molding?
The choice of glue depends on the weight of the plank and the material of manufacture. Here are just a few recommendations:
- For the installation of lightweight polyurethane and foam elements, PVA glue or wallpaper glue is suitable. You can also purchase special glue for polyurethane products.
- Attach plaster products to gypsum mortar or polyurethane glue.
- Fasten wooden products with self-tapping screws.
In order to glue moldings to the wall, construction stores presented wide choose adhesive compositions. Pay attention to the following adhesive options:
- Loctite PL 355. Professional assembly adhesive made in Germany suitable for domestic finishing works, gluing skirting boards, decorative elements, as well as materials from MDF, PVC, chipboard, polystyrene foam, cork, plasterboard. The adhesive is moisture resistant, does not contain solvents, has no unpleasant odor, can withstand temperatures down to -20 degrees.
- Decomaster 250. The composition is designed specifically for interior molding and is a milky-white liquid. The glue has a lot of advantages: it is resistant to moisture, durable, can withstand cold down to -25 degrees, sets within 10 minutes, and dries in 24 hours. The composition can withstand 5 cycles of freezing and thawing.
- Stayer Professional. German-made mounting adhesive for construction and repair is reliable in fixation, resistant to moisture, temperature changes and frost. Suitable for fixing panels, borders, moldings, glass, PVC to any type of base.
- Kraft Nails Premium KN-604. Special mounting adhesive for mounting light parts: panels, moldings, ceramics. The adhesive composition does not contain solvents, is safe, non-toxic, dries quickly and is durable. temperature changes from - 18 to + 50 degrees.
- Bison EXPERT. Domestic adhesive composition intended for installation building materials and interior decoration. Used for gluing decorative corners, stucco moldings and moldings. The adhesive is suitable for both absorbent and non-absorbent substrates, as well as uneven surfaces. The adhesive composition does not contain solvents, is frost-resistant, and elastic.
How to glue molding to a wall?
The installation of the decoration is carried out very carefully, leaving no marks on the surface.
Preparation
To ensure that your work does not disappoint, adhere to the following rules:
- Before installation, allow the molding to “get used” to the room. Leave the product for a day so that the material adapts to the room temperature.
- The walls must be carefully leveled and cleaned. Apply pasting to a surface cleared of wallpaper only after puttying, priming and grouting.
- Be sure to mark the wall. For this purpose, you can use the cornice itself.
- To prevent the planks from slipping before the glue dries, drill holes in them for self-tapping screws, and mark the locations for dowels on the wall. After the glue has dried, the screws can be removed and the places where they are attached can be puttied.
- Apply assembly adhesive to reverse side molding.
Important! Apply paint to the decorative element one day after installation. Use only acetone-free paints for painting.
Mounting methods
You can install the molding directly on bare wall or for wallpaper. Each option has its advantages:
- Decorative strips glued to a bare, cleaned wall have a longer service life, since they do not need to be replaced when changing wallpaper. However, it is much more difficult to adjust wallpaper joints to them and it is not a fact that the next time you decorate the apartment you will not damage the glued molding and you will be able to easily select the wallpaper of the required color.
- Gluing moldings to wallpaper is much easier. The operation will take less time and the result will be more accurate. However, if you replace the wallpaper, you cannot reuse the decoration.
Important! Which option to choose - decide for yourself, but remember that for papered walls it is better to choose light moldings made of polystyrene or polyurethane, and the surface of the base should be smooth and without depressions.
Required Tools
To glue decorative elements you will need:
- Hacksaw with fine teeth.
- Miter box for cutting butt angles (35, 45, 60, 90 degrees).
- Gun for applying glue.
- Adhesive composition.
- Putty knife.
- Sandpaper.
Step-by-step instruction:
- Start by marking the pattern on the wall. The most convenient way to mark is using the decorative strips themselves.
- Use a miter box to cut the parts with a margin of 2 mm. During the gluing process, carefully cut off the allowance, but if there is no allowance, gaps may form. Learn separately about some of the nuances of working with PVC models - read the link.
- First glue the corner pieces. If you are gluing elements to a bare wall, pre-moisten it with water or primer. Apply glue evenly to the supporting surface, spread the composition with a spatula. Apply glue to the back of the plank and press it against the wall. Wait for the glue to set. Use self-tapping screws to secure the molding to the surface.
- TO corner elements glue the straight ones. Align the joints and clean them from dust. Apply a layer of putty to the joints. When gluing, press the parts tightly together.
- After drying, cut off excess joint glue with a knife. Sand the joints.
- Fill the remaining gaps between the wall and the stucco element after installation assembly adhesive. Remove excess glue with a damp cloth.
- If there are any unevenness on the surface of the parts, sand them with sandpaper.
- After a day, start painting the molding.
- Attach the wooden elements with self-tapping screws and glue. Drill holes for the screws in advance, and after gluing the strip, screw them until the cap is deepened. Cover the resulting depression with putty.
- To prevent the joined elements from spreading, use a stapler. Remove the staples holding the elements together after the glue has dried, and cover the traces of them with putty.
Important! Installation of gypsum moldings requires special care and a certain skill, since the gypsum solution hardens very quickly and it will not be possible to correct an already mounted part. Apply gypsum mortar to the plank and press it against the wall exactly according to the markings. Hold the element until the solution “sets” completely.
Painting
The last step is painting. First of all, carefully check the appearance of the glued elements; if necessary, remove all remaining remaining glue with a knife, sand it with sandpaper, and cover it with putty. After preparatory work Paint the moldings in the required color. The choice of paint depends on the material of the molding and the interior of the room.
- It is better to paint the joints before gluing them to the wall.
- For finishing a room with walls in dark colors use white molding to make the interior more airy and cozy.
- Colored moldings for wall decoration have gained particular popularity in Lately. Paint decorative pieces a shade or two higher or lower than the wall color.
Important! You can use the main tone of the walls for painting, then the molding will create an additional decorating effect.
- Moldings pastel colors perfect for the living room. They help create an emphasis on paintings and family photographs. Use decorative elements in pastel colors possible for zoning space.
High-quality installation of molding will make your room attractive and original, and beautifully and accurately mounted decoration kits will transform walls and ceilings beyond recognition. Be creative, imagine and use our tips and recommendations to implement your ideas!
Molding is a neat decorative detail, which is an overhead convex strip. Moldings are used to decorate a wide variety of surfaces (not only, but also ceilings, arches, doors, etc.).
What is it for? Most often, moldings help make the decor a little neater, stricter, more defined, and give it an unobtrusive touch of classicism.
In addition, moldings can help in visually adjusting the proportions of the room. If you place them on the wall in the form of vertically elongated rectangles, you can.
And if you divide the walls with moldings horizontally located around the perimeter of the room into two or more parts, the ceiling, on the contrary, will visually drop slightly.
The same goal can be achieved by choosing horizontally elongated rectangles on the walls.
You can also use moldings as frames to frame wall decor.
Graphic decor
Moldings can also act as an unexpected graphic decorative element wall decoration. Just look at these amazing examples! Isn't it a bit far from the classics?
Moldings in the nursery
Do you think moldings are too boring to use in children's room decor? Take a look at this example:
Photo: Instagram wallpaper_na_vspolinskom_2
The designers used moldings painted in bright colors, For unusual design walls - it turned out fresh and original.
To highlight or not to highlight
When decorating walls with moldings, you decide for yourself important point: whether to highlight them with color or paint them to match the walls. This is largely a matter of personal preference, but there is also a practical side to the issue. So, if the moldings in your interior, in addition to being decorative, have the function of visually adjusting the proportions of the room, it would be logical to highlight them with color to enhance the effect.
It is also worth painting the moldings a different color from the wall if they serve to differentiate two different options finishing (relevant for situations where, for example, the lower part of the wall is covered with some wallpaper, and the upper part with another).
If, choosing this decorative technique, you simply want to make the decor more interesting and give it a classic touch, you can safely paint the moldings in the color of the walls.
Moldings and wallpaper
In combination with wallpaper, moldings can become very bright element wall decor. Look how stylish the panel turned out in this children's room! But to create it, they only used different types of wallpaper and, in fact, moldings.
– source: //stroy-podskazka.ru
Moldings are perfect for decorating a bedroom. They look delicate, seasoned, and aesthetic. With the help of this simple and inexpensive material you can create a true royal design.
Depending on the color of the moldings and related decorative materials, used in the design, adaptation is made in style. Thus, moldings can be dark, strict, hinting at gloomy majesty and seriousness. IN light colors This material is gentle, discreet.
Molding is not just a coating, it is an overlay part applied to the surface of the main finishing material.
Advantages
Source: //vip-1gl.ru The main advantages of using moldings:
- Ease. Wood weighs more, and all other types of compositions are lightweight. This makes it possible to simplify the installation and delivery of the coating. To fix light elements, it is enough to prepare a simple adhesive composition suitable for molding.
- Strength. This advantage is characteristic of wood and gypsum materials. Foam and polyurethane are fragile. On the other hand, high strength coatings are usually not required in the bedroom
- Easy to install. Installation is limited to taking measurements and marking for installation. When this stage of work is completed, you can begin application. In order for the molding to stick well, it is enough to hold each element pressed against the wall for 1 minute.
- They are not afraid of moisture. Neither type of material absorbs moisture. This advantage is achieved thanks to modern technologies, providing the possibility of high-quality processing and protection.
Source: //remontbp.com Moldings are used in different styles registration They are beautiful - this is their most important advantage, for which users buy the material.
Overlay elements must not be painted or damaged. They are processed and covered with film under production conditions. If damaged, part of the film is removed. In this case, some elements can be replaced with others by dismantling the damaged pieces and installing new linings in their place.
Kinds
Source: //design-homes.ru There are several classifications of moldings. Users rate more often external qualities material. Some are more beautiful, others do not suit the interior. Some bend, others are solid.
Moldings differ in the type of materials from which they are made. Let's look at the main ones.
Tree
Source: //avatars.mds.yandex.net Wires can be installed into the wood molding. Production is possible from different types of wood. Some brands offer modern version– creating blanks from gypsum and applying a composition based on glue and wood shavings to them. Such moldings are cheaper.
The wood is generally durable and can be painted. Such materials are durable, but slightly heavy compared to others.
Wood molding is always handmade. In machine automated production it is difficult to obtain a well-processed coating. This affects the cost - wood material, although it looks noble, it is sometimes unreasonably expensive.
If the tree has not been treated with an antiseptic and special means protecting it from moisture, it is better to carry out such work right away. If the humidity in the bedroom is low, then you can leave wood covering in its original form.
The tree weighs more, so it can move. To prevent this situation, you can reinforce it with self-tapping screws.
Gypsum
Source: //myhome.ru If the material is of high quality, it will last a long time. However, it is not always possible to determine the quality of products by appearance.
Plaster is expensive, weighs a lot, and is not easy to install. Strengthening is also required, however, when introducing fasteners, the structure may crack.
The use of gypsum is justified if there is high humidity in the room and there is a risk of damage.
Polyurethane
Source: //detboxfon.ru Advantages of the material:
- low cost of repairs;
- ease of fixation;
- light weight;
- large selection of colors;
- can be painted and even laminated;
- ease of care;
- The surface is smooth, so it is practically not dirty.
Polyurethane is similar to plaster. This is a durable material, high quality, low cost. The service life is 30 years if the surface is covered with a good finishing layer.
Expanded polystyrene - polystyrene foam
Source: //vid-stroy.ru This material has many advantages - it is lightweight, easy to fix, and is not afraid of moisture. However, when choosing, you should pay attention to the fact that adhesion to heterogeneous structures is not easy to achieve. For example, on decorative plaster or paint on the moldings will not last long. Expanded polystyrene is fragile, not durable, and easily damaged.
Polystyrene
Source: //i2.photo.2gis.com It lends itself well to painting and applying other compositions. Lightweight, quick to attach. Does a great job creating any designs. This molding can be fixed transversely, securing one element next to another. There can be a lot of finishing options.
The disadvantage is the grainy surface, so the coating quickly becomes dirty and darkens from the constant ingress of dust. There are no defects, chips, or detachments on the cut.
Design options
Source: //stroy-podskazka.ru The main feature of moldings is the ability to implement them in an original way into interior design. It's easier to deal with white. If the walls and ceiling are white, then the moldings are selected accordingly. They are installed in any order. You can lay out the following options for figures:
- Circle. You can buy rounded blanks that are large in width. Also, if the design provides, the circle combines well with a surface consisting of several levels. Sometimes a hill is created from plasterboard, and molding is installed along its side parts at the junction with the lower level. It is bent to the shape of a circle, but this requires greater flexibility of the material.
- Rectangle. It is easiest to install plain sheets of moldings that will fit together in a square shape. This option is implemented when work needs to be done quickly and without the need to take precise measurements.
- Complex shapes. You can cut soft corner cuts from the molding. More often they are provided either at the top horizontally (they replace the corners), or both at the top and bottom. Such figures are characterized unusual solutions. Can be implemented into design different shades. The base will be light and the molding dark, or vice versa.
- Installation of large molding. Large and massive sheets are made from lightweight material. This is an alternative for carrying out complex work related to the installation of plasterboard elements designed to create multi-level structures.
The molding is fragile, so it is not possible to create shelves, internal niches and other functional elements with its help.
Simple options
Source: //workins.ru Not every type of interior design fits into complex molding decorations. Renaissance, high-tech, classic and modern variations quite suitable.
How can you easily place the material to give the room sophistication and unobtrusive tenderness:
- Skirting boards. Ceiling or floor skirting boards used for decoration and protection. If we are talking about achieving the latter goal, then wooden molding will do. All others are installed under the ceiling. You can place small, narrow strips on the floor that will not be touched by residents when moving around the room. If you step on the fragile molding, it will quickly become damaged. Ceiling skirting boards beautiful, gentle. The color can match the ceiling covering or the shade of wallpaper, plaster, or paint.
- Door frames. The materials surrounding the door can look quite elegant thanks to the installation of molding. This material does not look good in a single design. If the room has other elements decorated with moldings, then they will also be suitable for platbands. If the wood of the trim differs from the shade of the walls, floor and ceiling, they are guided by the wooden shade. In some cases, the platbands are made narrow and invisible - they are completely covered with moldings. You can also buy wooden canvas.
- Furniture decor. In the bedroom, the molding is installed on the head of the bed, chests of drawers, wardrobes, and other pieces of furniture. Select color furniture facade, they start from it in the subsequent selection.
Source: //topdim.info Glossy and matte surfaces are nothing new. And if earlier it was possible to find an average option for painting on sale, today most variations are offered in finished form. They only need to be installed - no preparation, painting or varnishing is required. However, this option is not always supported - you can put the moldings under painting, which is carried out on all walls. The procedure is simplified after all the materials have been installed, when all that remains is to apply the pigment.
You can add gloss to the molding by applying a varnish coating suitable for this purpose. Before purchasing, it is recommended to ask whether it tolerates application well. additional materials finishing.
Visual expansion
