How to hide TV wires on the wall - simple solutions versus non-standard ideas. The best ideas for hiding wires on the walls, floor and ceiling in the house How to hide electrical wiring on the wall

Reading time: 3 minutes. Published 01/10/2017

When the option of buying a new skirting board is not considered, don’t despair - just cut off the old one! Yes, yes - cut off the bottom of the old baseboard! Of course you will ask - why do I need this? So, now there are special skirting boards on sale - they will help you. You simply cut the bottom of your baseboard, then put the cables that are in your way into the free space, and cover the whole thing with a cover. Voila! No wires are visible. All that remains is to paint the overlay in the color of the baseboard, or, what is more convenient, paint them along with the baseboard! This way, all the wires will be hidden, and the baseboard will be fresher and more beautiful.

2. Lay the wiring under the ceiling. This option is only suitable if you need to hide the wires in the room where it is installed. suspended ceiling. Unfortunately, not everyone has enough room height to be able to afford to further lower the ceiling by installing a suspended ceiling, however, this option cannot be discarded.

3. Conduct all wiring in cable channels. This universal option, because cable channels, or as they are also called - boxes, look quite aesthetically pleasing and neat, and at the same time very functional. In one box 2 cm wide you can lay 4-6 power cables for a TV or computer, and this is enough to hide all the main wiring in the room.

To install the box you need smooth and smooth walls, but in apartments they are like this almost everywhere, so the cable channel will lie flat and without indents.. In addition, it can be covered with wallpaper to disguise it, and then it will be difficult to identify with the naked eye.

Issues of hidden wiring concern many citizens, especially if they have the Internet. Not everyone wants to sit at a table and move the mouse in front of the computer - many want to surf the Internet while lying on the couch using a laptop or tablet. However, most modern Internet equipment, such as Cisco ws-c3750x-24t-s, only work via wire. Although, as an option, everyone can connect their own router with a Wi-Fi antenna to such a switch and use the Internet throughout their apartment. Think about it, wireless technologies are the future.

Before repairs, they usually think through work with electrical wiring, solving two interrelated problems: how and where to hide wires in an apartment and how many sockets are needed ? The preparation of this plan depends on many reasons, but without an idea of ​​what, where and how the furniture will be placed, it cannot be solved. Finland has very strict rules fire safety, therefore, at the request of friends who asked where our wires are, if they are not visible in the photographs after the repair, showing those electric installation work, which we spent at home, it must be said that we did everything possible to ensure that, while observing the rules, our electrical wiring was laid in accordance with our personal ideas about comfort.

During the renovation process, we partially replaced the electrical wiring, and hid the wires in special plinths for electrical wiring. And if you click on this photo, you can go to the post where I tell you how they built it in Finland 50 years ago, what we encountered during the renovation process, and specifically about the state of the electrical wiring before it.
And in this post I show all the wires and sockets in our apartment, and how they are hidden.

In the previous photo in the living room, the large flower is covering the baseboard for the electrical wiring and antenna and outlet, so we'll move it over and see how it's done.


Directly from the TV there is a single plinth, inside of which there is not only electrical wiring, but also an antenna, and from the outlet there is a thinner plinth just for the antenna. The electrical cord from the TV is plugged into a socket using a regular plug.


We had to cut off a regular outlet from the extension cord and install a smaller, flat one so that it would fit behind the TV, because we couldn’t find a long cord for it. I already told you about it, the distance from it to the wall is 2.5 cm.


The terrarium, because it stands sideways, could not be connected via the plinth, so the wire for it is an ordinary white one from an extension cord, but the plinth for the antenna ends and a piece of wire also sticks out, because we didn’t want to glue the plinth onto the wallpaper, it’s ugly. And do internal wiring in the wall is prohibited due to local safety regulations.


In the bedroom I managed to twist the bottom around the mechanism so that they are no longer lying on the floor, which I complained about in the post that they were too long.




There is a second outlet in the bedroom that we don’t use, but I didn’t bother to remove it because the curtain is constantly covering it.


Inside the kitchen cabinet there is a socket for the hood and with it light bulbs for light above the stove.


The main outlet in the kitchen above the desktop looks like this: for a kettle, coffee pot, tablet and basically anything that needs to be charged.




I call the additional outlet in the kitchen a guest outlet, because friends and relatives who stay with me plug in their computers and work in the kitchen. Also, a Christmas sixteen-candlestick sticks into it when it stands on the window in new year holidays. It was also impossible to install my favorite flat sockets in the kitchen due to safety precautions.


In the bathroom, the main socket is above the lamp, it is connected to an electric toothbrush, and it is also used for a hair dryer.


It would have been impossible to remove the extra outlet in the bathroom anyway, so I left it just in case: you never know, maybe when we buy a washing machine and dryer.


From switchboard in the hallway there is a plinth for electrical wiring washing machine and ovens.






It runs along the corner along the mirror and ends at a regular baseboard. A hole is drilled from there and then it is laid behind kitchen cabinet to the dishwasher and electric oven.

I don’t like modern sockets because they are convex and collect dust, so I didn’t replace the flat ones that were in the apartment.


This is the only outlet in the office, and the computer wires, unfortunately, lie on the table, and I still can’t imagine how to hide them. They collect dust, but I wipe them regularly when cleaning as necessary.
The conclusion that I made for myself in the process of organizing and planning renovations: the main thing is not the number of sockets in the apartment, but their thoughtful use for connecting the necessary household appliances, because electrical wires in the apartment collect dust and need to be hidden .
What do you think, friends?

Hide wires for decorating your own house or apartment - a necessity. In addition, this is also a safety issue, because often a child, dog or cat can get caught on the wire and pull it. In other words, if you take the time to hide the cables, you can take care of beauty and safety. There are many different ways decorative placement wires so that they do not interfere.

Internal disguise

Internal camouflage is one of the most aesthetic methods, because the wires will not be visible at all. It is possible to hide the wires inside, for example, in the wall, floor or ceiling. This method is suitable when major renovation. It will be possible to hide all communications sufficiently in a decorative way. And then overall design and the charm of the interior will not be spoiled.

Wall

How to hide wires in the wall? This is the question people ask most of the time. Usually there is a need to hide cables from a sconce, TV, home theater or router. The method described below will be effective for hiding the cable in cases where there is already a cable on the wall. decorative coating.

  1. Just follow a simple algorithm and everything will work out:
  2. It is necessary to cut the wallpaper using a sharp knife. If it is liquid wallpaper, you need to carefully pick it out. The paper material must be folded into different sides
  3. and secure with needles or pins so that it does not interfere with work.
  4. Next, you should make a groove where the wire will be located. To do this, you can use any construction tool.
  5. You need to lay the cable in the resulting recess. The top of the wire must be covered with plaster or carefully covered with plasticine. Suitable remedy
  6. selected depending on the scale of the work.

After the selected solution has dried, you need to glue the wallpaper in place, after lubricating it with glue. If it is liquid wallpaper, then it is soaked and glued into place using a spatula.

The method is effective for hiding wires in the entrance. In this case, the procedure is simplified: you need to make a recess in the wall, lay the wires and cover it with plaster.

Floor Placing cables under the floor is also in demand. This original way It also allows you to very quickly disguise wires.

  1. Here you can give preference to one of several options: Using skirting boards. This is the easiest way. When buying skirting boards, just pay attention to their, in particular, it is necessary that the product have a special niche at the back, where the cable will need to be placed. This plinth is attached in the same way as an ordinary one.
  2. Cement strainer. This procedure is performed quite often in a house or apartment during a major renovation. During this process, the wires are pulled through corrugations, laid on the subfloor and covered with cement screed on top. Finally, all that remains is to put on a decorative coating. This method is also suitable for camouflage in a wooden house. Top on cement screed You can lay a wooden floor.
  3. Disguise. This easy way, which involves the use of a hammer drill. With its help, they make a recess in the floor, where communications are laid. Subsequently, this place is simply filled with cement. In this case, the cat or puppy will not be able to get hurt.

This method of hiding wires helps to hide wires in the hallway, kitchen, living room or computer room.

Floor covering of wires in the office is especially in demand.

Ceiling There is also an opportunity to disguise wires on the ceiling. This is in demand for hiding cables from a TV that hangs on the wall, from a range hood, antenna, router or Internet. Moreover, this method is quite simple to implement.

  1. You can give preference to one of the following methods:
  2. Stretch ceiling. Here you need to think about masking the wires before the fabric is stretched. You can use any method, even just running cables. But it is preferable to take care of insulation in case the room suddenly gets flooded due to neighbors above.

Plasterboard ceiling. You can create a special niche from plasterboard around the perimeter of the ceiling. In this case, it will be possible to arrange any number of wires. However, it is preferable to attach all cables to one common trunk for convenience. Attention! You can take care of the aesthetics of the ceiling using decorative lighting.

This looks especially impressive on a ceiling with a niche. Recommendations for external camouflage will help you take care of the aesthetics of the interior. There is no need to drill anything, plaster or cut the coating.

However, such methods of camouflage look quite interesting and can enliven the situation and the interior as a whole.

  1. Tree branch. Special sets are sold in stores. They contain leaf-shaped hooks that allow you to secure the wire to the wall, and birds for overall beauty. It is enough to attach the leaves in the direction from an interior item, for example, from a TV, or to an outlet.
  2. Full trees. You can also braid a doorway in this way. In general, the use of such trees is suitable in cases where the wire is very long and you do not want to cut it. Special fasteners will help shape the woody silhouette.
  3. Art object. With it you can create original design light bulb, for example, on computer desk. The design is fixed on the wall, allowing you to solve the problem with hanging wires.
  4. Scenery. This is a rather complex implementation option that involves creating a spectacular panel. This decorative element on the wall looks very interesting. It can be placed above a table with a computer, around the TV.
  5. Power station. This approach to business will help to implement several functions at once. In particular, it is necessary to create a power station on the wall surface. With its help, you can not only hide the cables beautifully, but also start teaching kids the principles of the functioning of a power plant.
  6. Highway. The implementation of such a project on the wall is quite complex and painstaking. It involves quite a lot of time. All components are initially cut out of cardboard (you can print them or draw them yourself, or you can also buy a ready-made set). As a result, it will be possible to decoratively hide the wires.
  7. Fence. All cables can be placed along the top of the plinth, masking them with decorative blanks in the form of a fence. They can be purchased at a specialty store or cut out of cardboard or drywall and attached to the wall using double-sided tape. The fence can be multi-colored or plain.

The methods of external camouflage do not end there. If there is no desire for fundamental changes, you can choose more simple ways. For example, you can arrange furniture so that it hides wires near the wall. Suitable for dealing with unaesthetically located wires and door frames. They do an excellent job of hiding wires, high houseplants. A carpet or carpet will help hide the wires on the floor.

Lifehack! In order not to do the work several times, it is better to immediately draw several options on a sheet of paper. This will allow you to visually assess what the result will be and give preference to the most suitable option.

What about the computer?

Today there is a computer in every home. It, especially when there is a system unit, has many wires: from the computer itself, monitor, speakers, keyboard, mouse, if there are no other technical means. As a result, there are constantly tangled wires. You will have to use your imagination and spend a lot of time to combat this problem. The most suitable ideas are:

  • pass the wires through the box, having previously made holes in it;
  • secure the wires in a sewn cover secured under the table so that the cables do not interfere with your feet;
  • use for placing wires double-sided tape, screws, clips, securing cables under the table cover;
  • make a cover, placing it behind the back cover of the table (if there is one), where all the wires are hidden;
  • Tighten the wires into a hose, which will eliminate the wire chaos under the table;
  • Use paper clips to secure connectors from devices near the table top.

It is important! If you have several mobile phones in your home that have different charging device, create a special charging corner. To do this, you can place an extension cord with sockets in the box and turn on all the chargers. Make holes in the box for the wires (curly ones are possible) and pull the cables through them. Their length should be such that they can be easily connected mobile phone and put it on the box. The unnecessary length of wire is rolled up and secured, for example, with a paper clip. The box needs to be closed.

How to hide wires in a car?

How to hide wires in a car? This question is asked by every owner of a DVR who is already tired of the wires hanging from the device. You can give preference to this algorithm:

  1. Remove the plastic part of the stand. To do this, you need to disconnect the two clips by pulling them towards you and remove them from the clips by pulling them up.
  2. Route the wire inside so that the end goes to the door.
  3. Press the panel into place.
  4. Route the wire between the previously removed element and an elastic band that acts as a seal.
  5. Open the glove compartment and run the wire through it from below.
  6. Do the same at the other end of the glove compartment.
  7. Place the wire under the mat.
  8. Route the wire through the armrest.
  9. Connect to the cigarette lighter.

The only problem is that you need a long wire. This method will allow you to cope with the problem of the always interfering cable from the car recorder.

Worth following useful tips to hide the wires beautifully, safely and conveniently. In particular, you can pay attention to the following recommendations:

  1. Label the wires to help you remember which is which and to avoid confusion.
  2. Don't tie wires together for various purposes, in particular, for the transmission of data signals (this includes cable from antennas, TV, computers, the Internet and audio devices) and with alternating current networks. If you do this, the level of noise and interference will increase.
  3. When the cable is long, there is a high possibility of damage, in particular electric shock. Such wires are especially unsafe for pets and small children, who may accidentally pull the cord during gameplay.
  4. Buy decorative box in order to hide cables, in a suitable store or do it yourself.
  5. Make sure that the chosen method of hiding the cables does not lead to the fact that the aesthetics of the interior will be lost.

Now you know how to hide wires. Both internal and external methods are in demand. Give preference to the one that is most suitable for a particular situation. Do not forget that the external way to beautifully hide the wire should fit into the overall interior design. In this case, it will be possible to achieve aesthetic design and safe use of all electrical appliances in the house.

Completing renovations in a home or office, as well as carefully masking existing wires, should not relax the owners. Mounting a new TV on the wall, replacing a computer, installation burglar alarm or additional wiring to power electrical appliances leads to the appearance of new switching. All this carries additional risks for children, animals and the appearance of the interior. What methods of camouflage are most effective? How to hide wires in an apartment in compliance with safety regulations and preserving design? Let's consider these points in more detail.

Internal disguise

The best option is to hide the cables at the stage of major repairs. There are several ways here.

Conceal the wires in the wall. This technology can be used before or after wallpapering. To begin with, the paper is cut using sharp knife, after which the edges are moved apart and fixed with needles. Next, using a puncher or manually, a groove is made for masking. After completing this work, the cable is laid in the prepared recess , and the groove is covered with alabaster or plasticine. The final stage involves applying glue to the wallpaper and fixing it in place.

How to hide wires under wallpaper is shown here:

Hide wires in the floor. There are several options here.

  • Mask the wires in floor plinth, where there is a cell for wires. When purchasing, it is important to pay attention to the design of the product, in the central part of which there should be a special recess. This is where the wires are laid. This method is distinguished by its versatility and ease of execution.
  • Hide the wiring in the groove. The principle here is the same as in the case of wall mounting. Using a hammer drill, a recess is made into which excess commutation is placed. After this, the groove is filled with cement and leveled to the floor level.
  • Fill with cement. If the quality of the flooring in the room leaves much to be desired, you can make a new screed by hiding the wires in it. The latter should be corrugated.

Remove wiring from the ceiling. There are two options:

  • Hide the wires in plasterboard niche installed around the perimeter.
  • Hide the wires in between tension fabric and the main ceiling. In the latter case, it is worth warning the craftsmen in advance about your decision, otherwise you will have to use other options.

External camouflage

If the methods discussed above are not available for implementation, do not despair. To beautifully and wisely hide numerous cords, you can use the opposite method, which involves external camouflage. If you approach the issue wisely, numerous wires will in no way spoil the interior, but, on the contrary, will give it exclusivity and an unusual appearance.

Let's look at how to hide the wires outside. The options are as follows:

  • Imitate a tree branch. You can easily decorate a computer or television cable by using it to create a small branch decorated with homemade flowers, leaves or birds. This solution will transform the interior, giving it uniqueness and brightness.
  • Make a tree. If the wire is one and a half meters long or more, there is no need to cut it - it will turn into a nice “tree”. To fix the cord, special fasteners are used, with the help of which the necessary outlines are set.
  • Power station. Lovers original design can imitate supports on which the wires will be attached. This method allows you to solve two problems - make the wires invisible to the eye and create a basis for teaching your children.
  • Complex drawings. If you have free time and imagination, you can hide the wires on the wall by creating an original landscape. Here the main emphasis is on the contrast between the shade of the wallpaper (paint) and the cable. Separately, it is worth considering elements that allow you to highlight the wiring.
  • Fence. One of best options- fastening the wires in the upper part of the baseboard. But to hide them from view, it is worth making wooden blanks shaped like a fence, and then fixing them on double sided tape. This method is suitable for a corridor or a child’s bedroom. For greater originality, each element of the “fence” can be painted in a different color.
  • Car track. This option is the most labor-intensive, because its implementation requires time. To create a road, cardboard is used, from which the required object is cut out. Next, the paper is painted in a color that matches the interior.
  • Other methods. In addition to the options listed above, wires can be hidden under door frames, behind indoor plants, under the carpet or behind furniture.

Remember that it is better to develop a plan for masking wires in advance, and then strictly adhere to it.

Lots of creative ways to hide wires are shown in this video:

Hiding cords from the computer

Despite the popularity and availability of wireless technologies, many devices still require a wired connection. One of them is a computer, after installation of which a whole “web” of cords is assembled connecting the system unit with the monitor, power supply, printer and other devices.

How to remove all the cables from under your feet without disturbing the overall design of the room. There are several options:

  • Hide the wires and extension cord in a special box. To realize your plan, just find a box suitable size, make several holes in it, and then disguise all the switching in it. As an example, it is possible to use a Plug Hub box made of special plastic. Its peculiarity is the absence of a bottom and holes provided in the upper part. This “box” can be attached to the floor or to the wall.
  • Fixing cables under the tabletop. To the most simple options This includes masking the switching under the table, which will require binders and short screws. Make sure that the length of the latter is 20-30 percent shorter than the thickness of the top of the table. First, an extension cord is attached under the tabletop, after which the wires are collected into a bundle and clamped using binders secured with screws. There are other options - fastening the power cables using construction stapler(special clamps are used) or regular ties. In the latter case, the wires are pulled together into a common bundle and fixed to the table leg. The part of the switching that comes from the baseboard can be covered with plastic, matched to the color of the flooring. The filter outlet should be hidden under the tabletop, secured with wide Velcro (the latter is secured with screws). To prevent wires from dangling, the switching is placed in small cable channels, which are fixed using insulating tape or a simple plaster.
  • Creativity. As discussed above, the cable does not have to be hidden somewhere. One option is to fix it to the wall using clamps and then “attach” a bird cut out of a magazine. If you have available funds, ugly chargers should be replaced with products of a more original design.

Fixing wires under the table using binders is shown in this video:

and one more option:

Properly hidden wires are a chance to improve interior design and eliminate the risk of damage electric shock children and pets, as well as get rid of the “cobwebs” from under your feet. But, in addition to the secrets already discussed, it is worth considering a number of recommendations:

  • It is important to store numerous cords correctly. To do this, all switching from the set-top box, phones, computer and other equipment is put into a special box. To avoid future confusion, the purpose of each cable is signed. To avoid intertwining wires, you should use zip ties.
  • If the wire is needed regularly, you can fix it around the perimeter of the table on the underside of the tabletop. With this fastening, the cord is easy to remove and connect to the device at any time.
  • During the masking process, it is important to mark each cable on one side and the other. This precaution allows you to avoid confusion in the future, when the purpose of each switching element is already forgotten.
  • IN construction stores a wide range of special boxes made in different style and capable of completing the assigned task. You can easily hide wires in them and not worry about interior design.
  • When using fabric braiding, it is important to ensure that it does not sag. Otherwise, the risk of fire increases, and the appearance of such a product leaves much to be desired.
  • The power cable should be as short as possible. In this case, the risk of injury from electric shock is reduced and the masking process is simplified. If small children live in an apartment (house), it is worth remembering the danger posed by power cords. That is why it is advisable to hide the wires immediately after installing the equipment.
  • Cables performing different function, must be divided among themselves. Thus, the wires for powering a computer, printer, music center and other devices are connected separately from the power cords through which voltage is supplied. Thanks to such forethought, it is possible to minimize the interference that causes noise and interference.

Results

It’s not difficult to tidy up your interior and protect your loved ones by masking wires, because there are many ways to do this. effective ways. The main thing is to decide suitable option, think through the switching layout in advance, purchase necessary materials and follow the advice outlined in the article.

Even taking into account the fact that wireless technologies are increasingly taking their place in our Everyday life, we are not yet able to completely abandon wires. Despite any Wi-Fi networks, television, telephone and Internet cables are still present in our apartments (not to mention ordinary electrical wires).

Even if all this is connected into one cable, there is no escape from the need to lay it. This means that the wires need to be disguised somehow. How? Read our article...

INSIDE OR OUT?

To begin with, there are two main ways to hide wiring: directly inside the wall or on its outside.

The first option involves a lot of dusty work: you will have to scratch the walls and spoil the existing finish, postponing dreams of beautiful interior for some time. But this option will radically solve the problem of interior aesthetics. It is recommended to use this method during a major renovation of an apartment or in a new building.

For those who are not interested in hiding the wires once and for all, we can offer one of the simplest and budget options- cable channels. Let us outline their main advantages:

  • the problem of unsightly, tangled or dangling wires is completely solved: the cables are hidden, and a decorative element in the form of a cable channel appears on the floor or wall;
  • ease of installation: the cable channel box is fixed on the wall, the wires are laid inside, and the lid is closed on top. No inconvenience with wall chasers, dust, construction debris or damaged finishes;
  • ease of use: the cover and the cable channel body are connected using a latch lock, which allows you to open and check the cables inside at any time, lay a new one or remove an unnecessary wire;
  • thanks to the presence of various connecting elements, it is possible, if necessary, to increase the length of the cable route, run it to the wall, ceiling, or, conversely, lower it to the floor;
  • low cost makes the cable channel one of the most available ways Nicely hide the wiring.

Few non-specialists in this field know that a cable channel is not just one plastic box with an opening lid. Today in the markets you can find the most different types cable channels for various purposes.

Once you find out which boxes are used for what, it will be much easier for you to navigate when purchasing, and the interior will look much neater.

WHY IS IT STILL NECESSARY TO INSTALL CABLE CHANNELS?

Firstly, they make the interior of the room more neat and aesthetically attractive. Agree, confused between

are wires - not best decoration your room.

Secondly, it is convenient: it will be much easier to figure out which wire powers a particular device.

And thirdly, it's safe. If you have small children or pets in your home, you must hide the wiring so that

protect them from electric shock. Even a small-sized cockatoo parrot can bite through a 0 10 mm wire with its beak!

TYPES OF CABLE CHANNELS

Today, cable channels are made of aluminum, steel, and plastic.

PLASTIC CABLE CHANNELS

The most popular are plastic cable ducts, as they have good characteristics. The cable channels themselves are usually made of PVC.

The main feature of high-quality material is that under mechanical influence the channel changes shape and also easily restores it without significant changes.

Accessories for cable ducts are made from ABS plastic with additional additives that prevent the spread of combustion and the release of harmful vapors when heated (the composition is similar to the material of plastic parts of sockets and switches). This material is easy to recognize: its structure is uniform, there is no lamination, and the product is quite durable.

Plastic models have different color scheme. Models with a wood pattern are very popular.

METAL CABLE CHANNELS

Metal models (aluminum and steel) are characterized by excellent fire performance. High-quality galvanized steel has a special coating that prevents corrosion. Metal cable ducts have a long service life and are much more durable than plastic models- even withstands hammer blows.

The price for such products starts from 2200 rubles. behind linear meter.

BOARD CABLE CHANNELS

Often, a cable channel is not an interior decoration, but a need to hide the wires so that they are as invisible as possible. Skirting cable channels cope with this task perfectly.

These are a kind of plastic plinths, in the central part of which there is an internal cavity where the wires are laid. There are entire systems of plinth cable channels: not only long trays, but also a number of additional devices that allow you to assemble a structure of any configuration.

These can be external and internal corners, bends different shapes, plugs, mounting boxes on which switches and sockets can be installed. There is also an option to install sockets directly at the baseboard level. This is convenient in the kitchen, when sockets are provided for a built-in large household appliances(fridge, dishwasher, electric stove) - so they don’t interfere, they’re practically invisible.

The disadvantage of this system is that the plinth cable channel accommodates a small number of wires. Most often they hide in it tv cable. To bring out the connectors in the right places, there is special fittings that allow you to do this neatly and as discreetly as possible.

Common sizes of plinth cable channels: 15 x 100; 20 x 50; 20 x 70; 25 x 100 mm. Also available for sale are cable channels such as large sizes(35 x 80; 35 x 105; 50 x 80; 50 x 105; 50 x 150; 65 x 150 mm), and mini-series (20 x 12.5, 32 x 12.5; 40×12.5 ; 32×16:^0x16; 60 x 20;

The price of such a product depends on the manufacturer, the most budget models can be purchased at a price of 385 rubles. per linear meter, the price of accessories starts from 30 rubles. a piece.

FLOOR CABLE CHANNELS

It happens that you need to pull the wires to the center of the room along the floor.

You can, of course, throw in an extension cord. But in this case, wires will appear again, which are easy to touch and get caught, and computer chair It is not advisable to transport it along a wire - you will have to lift it every time.

This is where floor cable channels come to the rescue. They are used for reliable laying of cables along the floor, as they can withstand heavy loads. Moreover, the relatively low height of the structure allows you to move freely around the room without fear of tripping, and even a computer chair on wheels can easily overcome this obstacle.

This type of cable ducts differs in both shape and installation method. They are mounted on the floor, so on one side they have a rounded shape, so they do not interfere with movement. Available in impact-resistant plastic or aluminum. There are also accessories for them - joints, corners and plugs. The most common sizes: 50 x 12; 75×17; 92×20; 160×65 mm.

The price of floor cable channels is not much different from baseboard ones - they are sold at a price of 370 rubles. per linear meter.

FOR WALLS PARAPET CABLE CHANNELS

Cable channels of this type are similar in structure to baseboard ones. The main difference is this. that they are mounted above floor level. Installation of parapet cable channels is carried out, as a rule, at the level of window sills or at the level of the workplace. It is possible to install switches and various sockets (for 220 V power supply, television, Internet, etc.) in the body of parapet cable channels. They also consist of various elements that allow you to assemble any configuration.

Parapet cable channels have various options finishing that allows you to either make the channel invisible (then the elements are matched to the color of the walls), or, conversely, highlight it and make it an accent in the interior.

The price for parapet cable channels is almost twice as high as for floor ones and averages 600 rubles. per linear meter.

PERFORATED CABLE CHANNELS

This is a type of electrical box, distinctive feature of which there is perforation (comb-shaped profile) on the sides. They are, as a rule, a U-shaped profile 2 m long and have a different cross-section. If necessary, they are equipped with a lid with continuous or partial perforation. As with other cable channel models, the cover snaps into place after the cables have been laid. This profile design is used to lighten the weight and installation of cable routes. Perforated cable ducts are often used when the appearance of this installation is not so important (for example, in closets, basements, utility rooms).

The prices for such cable channels are among the most budget-friendly - on average 200 rubles. per linear meter.

FLEXIBLE CABLE CHANNELS

In situations where a “flexible approach” is important - if the walls, floor or ceiling have relief or height differences - we need cable channels that can easily repeat this shape. In this case, flexible cable channels are used. There are cable channels of open and closed types. Open ones are easy to maintain and install. Closed completely prevent the entry of foreign objects. TYPES OF FLEXIBLE CABLE CHANNELS:

  • flexible chains (or tracks)- multi-sectional structures that can bend along their entire length in one plane (up and down). Each element of the “chain” is connected to adjacent links by a hinged linkage and has a snap-on lid. There are small gaps between the links, which is why the cable channels are called semi-closed.

Most often they are used in production to connect machines. However, this does not mean that the owner of a private house cannot use such a cable channel. If he has his own home workshop or garage, this type will be very useful to him. Width of flexible chains - from 20 to 234 mm;

  • tubular: flexible cable channel for connecting to the door. Such a cable channel consists of a flexible metal hose and two fastening elements, which are attached to the wall and door. Typically, such transitions are used to power electric locks. Please note that the tubular cable duct can be bent countless times, but only if there are flexible wires inside (made of thin wire)
  • molded from soft plastic or rubber. Cable channels, molded from rubber or soft plastic, have fairly thick walls that can prevent moisture from getting inside. In a private home, cast cable ducts are successfully used for electrical wiring in a bathhouse (with the possible exception of a steam room).

Flexible cable channels will cost more - prices start from 1000 rubles. per linear meter.

MINI CABLE CHANNELS

By by and large mini cable channels are standard U-shaped channels with a cover, but with a much smaller cross-section. Another difference from conventional cable channels is the absence of accessories (plugs, joints, corners, etc.). They are used where there is no need to hide a large number of wires: for example, when connecting ceiling lighting to country house. Mini cable channels can be following sizes: 10 x 10; 12 x 12; 16 x 14; 20x20; 25x25; 40x40 mm.

The price for mini cable channels varies from 60 to 150 rubles. per linear meter.

FOR CORNERS

Due to their design, corner cable channels can be installed at the junction of the room wall and ceiling and, less often, instead of a baseboard.

Angled cable channels are cut with a hacksaw at the desired angle. Do this carefully so that the corners meet evenly with each other, as they can also serve as a decorative element - molding. No one will ever guess that there are wires hidden underneath! However, such a cable channel also has a drawback - it does not have as much space as in a baseboard one.

The most common dimensions are 40 x 40 mm, so you can’t fit a lot of cables into it, and we’re not even talking about wiring. Also, baseboard cable channels have thinner walls and are more likely to be damaged when laid underneath. Here you need to be careful not to damage the wires that you will lay.

The price for such cable channels varies from 60 to 150 rubles. per linear meter.

IS IT WORTH HIDING WIRES IN THE WALL?

If the interior style and your funds allow, you can take an extremely contradictory route: do not hide the wiring, but, on the contrary, expose it. How?

RETROWIRING

First we will, of course, talk about retro wiring.

Some time ago, this is exactly how wiring was done: insulators were nailed to the wall, and insulators were attached to them twisted wires. Then came the fashion for hidden wiring: everyone tried to hide the wires as much as possible, leaving only the frames of sockets and switches outside, but they also tried to make them as inconspicuous as possible. However, in Lately designers realized that everything new is a well-forgotten old, so open wiring in retro style is gaining popularity again.

It fits perfectly into the loft, English style, classic styles interiors, and also looks great in wooden houses made of logs, where a plastic cable channel would look simply ridiculous.

If everything is clear with the first reason (aesthetic), then the second reason why cable channels in log houses don't install - that's what wooden house changes its size all the time. Even after the main shrinkage has passed, there are changes and they are seasonal: in wet periods the wall becomes higher, in dry periods it settles. The difference in height can be up to 5 cm per floor! And since the cable channels do not change their size, the problem of their damage arises.

Retro wiring and all its components are not cheap: the twisted wire itself costs from 165 rubles. per linear meter, sockets - from 1200 per piece, switches - from 1500 per piece.

CREATIVE APPROACH TO WIRING

If you are young and active person or just keep up with modern trends, you will like our ideas.

Organize whole pictures out of wires! To do this, you will need a sketch or photograph of the future painting, a construction pencil, a couple of packs of staples for attaching the cable and the wire itself, the length of which depends on the size and complexity of the future drawing. The linear picture itself is outlined with a pencil, as well as the places where the cable begins (for example, a socket) and its end (a lamp).

But if there is not enough wire for the picture, but you still want to decorate it, cut out the silhouettes of birds from thick black cardboard and “plant” them on the wires - it will be original. Or

choose a cable in a bright, contrasting color and use it to create abstract shapes on the wall. For the most creative, there is another option: organize an entire installation on the wall - a tree from floor to ceiling.