Textured painting of walls with water-based paint. Textured wall paint: how to apply decorative volumetric painting with the effect of roughness or wax, concrete and under a stone with your own hands, methods of application and types of structural paints. How to do it right

Modern manufacturers building and renovation materials offer many tools for interior modeling and design. Textured paint is no exception.

Textured (structural, textured, embossed) paints allow you to create a special original texture and surface structure, like internal surfaces walls and facade.

This is explained by the fact that relief paint for walls is a thick, roughly dispersed mass, which, in addition to acrylic, includes inclusions of various structures (drop-like, scaly, and so on) due to which the necessary texture is created.

Thus, structural wall paints are a godsend for those who want to update the design of their home quickly, in an original and quite simple way.

Textured wall paint in the photo:

Structural paint application methods

The final appearance of the painted surface largely depends primarily on the composition of the paint used and the textural filler. However, the way the paint is applied plays a very important role in obtaining the desired result.

As a rule, structural paint is applied using a roller, trowel, sponge or brush, i.e. in the traditional way.

But pneumatic spraying of relief paint also takes place. Ultimately, not only depends on the method of applying embossed paint to the walls appearance the surface to be coated, but also the consumption of the starting material.

So, the methods of applying textured paint:

Brush painting

For this method, it is better to choose a wide brush. On the prepared surface, paint should be applied in large strokes in any direction. To get a more or less uniform wall texture, you must first perform horizontal and then vertical strokes. It is also possible to apply arbitrary patterns to the wall with a brush.

Roller painting

When applying relief paint with a roller, two conditions must be met: there must be at least three rollers: two identical and one smaller. The main painting involves two rollers of different sizes.

They must be completely lowered into the starting material and gradually apply the paint with vertical strokes on the wall, first with a larger tool, and then, if necessary, correct inaccuracies with a smaller roller. At the end of the work, be sure to check the thickness of the applied layer and, where there is too much paint, remove it with a clean dry roller.

Coating a surface from a spray gun

It should be noted that structured spray paint is commercially available. It should be applied with caution, because the thickness of the application is difficult to capture with this method. Therefore, before you start applying paint to the wall, you should try to spray paint on a piece of wood or drywall.

Spatula application

Spatula as a tool for painting surfaces textured paint suits perfectly when using thick embossed paint with a coarse filler or, if you wish, to obtain a non-uniform surface, and single various volumetric strokes. The spatula can be soft for a softer texture and hard for a rough texture.

Sponge application

The photo of applying textured wall paint with a sponge speaks for itself. This is an opportunity to bring to life any of your creative ideas. The best way satisfy the creative hunger for those wishing to paint.

Also, applying paint with a sponge makes it possible to use a variety of stencils when painting.

The depth of the texture in this case depends on the "grain" of the sponge.

DIY textured wall paint

Embossed paint can be prepared independently at home.

To do this, it is necessary to mix acrylic paint for the corresponding work (external or internal), for example, with granite crystals. These crystals are sold in bags at home improvement stores and will help give the painted surface the appearance of a sparkling mineral.

If you add special sand to the acrylic paint to give relief, then the wall will look like a surface painted with colored sand. You should not experiment and use sand that can be found on the beach or by the river.

You can also combine different structures. For example, to the main large relief applied with a brush, add small bright inserts of sandy islands or stencil pictures applied with a sponge.

Embossed wall paints: pros and cons

Pros:

A huge variety of textures and colors
Simplicity and speed of application
The ability to hide irregularities and various damage to the walls

Minuses:

A structured finish requires 15-30% more paint than a simple finish
Re-staining is possible only after removing the first

More photos of interiors:

The emergence of such an interesting finishing material, as a textured paint, made a splash in the construction market due to its bright color and unique structure created on the surface. Such a simple and technologically sophisticated coating immediately gained popularity.

But the question remains about how the factory and textured do-it-yourself paint differs from the usual types paints and varnishes?

What is textured paint?

Do-it-yourself or factory-made textured wall paint is a material that allows you to create a heterogeneous embossed coating. The scope of this type of finish is very diverse. Such surfaces can decorate the facade as well as the premises.

The application instructions provide for the possibility of creating a decorative coating on the following types of substrates:

Concrete;
Plaster;
Brickwork;
Wood.

Note!
If you need any finishing metal elements interior, it is more advisable to use products such as fireproof paints for metal Polistil or electrically conductive paint Zinga, which creates a coating that protects the surface from rust.

In fact, textured paint is a homogeneous mass of snow-white color, which contains a filler of a thick consistency. It is this very filler that allows using this material to create surfaces that imitate various reliefs. It is these properties that distinguish structural finishing compounds from acrylic or latex-type compounds.

Classification of textured material

A large assortment of embossed paintwork on modern market assumes a classification.

Conventionally, compositions of this type last depending on the size of the filler present in the composition:

Fine-grained (0.5 mm or less);
Medium grain (0.5-1 mm);
Coarse-grained (1-2 mm).

Structural paint products may contain the following products as fillers:

Stone chips;
Quartz dust:
Synthetic fibers;
Crushed or crushed gas silicate;

Self-prepared textured paint

The material prepared with your own hands deserves special attention. But how to make textured paint with your own hands?

For cooking you will need acrylic paint for indoor or outdoor use, in accordance with which surfaces need to be painted. It mixes with granite crystals, which can be purchased at any hardware store, and the price of which is not high.

You can also mix paint with sand to create a relief. This coating will create a surface that resembles painted sand.

Advice. You should not experiment and use sea or river sand, this will not lead to anything good.

Textured dyeing technology

What kind of relief will be created on the final coating directly depends on what application technique was used in the work.

Do-it-yourself textured wall painting can be done using the following tools:

Combs made of metal;
Natural sponges;
Structural beads;

Advice. Before embossing, it is necessary to apply a deep penetration primer to the surface.

In addition to the tool with which the application is carried out, the composition also plays an important role.

To give the coating more relief, add quartz sand or wood chips.

Painting with a brush.
For this better fit wide brush. With such a tool, the composition is applied to the prepared walls with wide strokes in any direction;
Roller processing.
You will need three rollers, two large, of the same size, and one small. With a large roller, the mass is applied to the surface, with a small roller it is processed hard-to-reach places, and unevenness or too large stains of paint are removed with a clean large roller; (See also the article.)

Spray finish.
There are formulations that are sold immediately in a spray bottle. When applying the material in this way, you must be very careful, because it is quite difficult to control the thickness of the layer;
Working with a sponge.
The sponge opens up huge creative possibilities, since it allows you to use various stencils in your work. With sponges, you can literally paint on the surface, creating a relief.

The main pros and cons of textured paints

If we compare this type of paint with other paints and varnishes, then the following advantages can be distinguished:

The textured coating can be applied to the surface immediately, eliminating the long and expensive leveling procedure. The embossed coating makes the walls uniform and hides cracks, dents and irregularities in the base;
The textured layer is resistant to all kinds of mechanical damage, which expands the scope of this type of compound;
Low price combined with a huge variety of textures and color options;
This type of paint is applied quite easily and quickly.

The disadvantages of textured coating include the following points:

Relief coatings for their creation require 15-30% more material than conventional painting;
You can re-paint the surface only after the first coat has been completely removed.

Do-it-yourself textured wall paint is a great opportunity to make high-quality and beautiful finish rooms without wall alignment. You will be able to create an original and bright design facade or room, spending a minimum of time and effort. And the variety of colors, shades and different sizes filler grains will make it possible to bring to life even the most insane design idea.

Much more important information how to do it correctly, you can glean from the video in this article.

Decorative painting of walls is one of the most popular types of decoration. It is very diverse, individual, with its help you can create a unique beautiful room, which will not have an analogue. At the present time, this type of wall decoration, such as decorative painting, has become a strong competitor to conventional wallpaper.

Dyes for wall decoration, as a type of finishing material, are characterized by many advantages:

The service life of painted coatings is a couple of times higher than that of wallpaper or plaster.
There are no joints on the painted surface, resulting in a perfect continuous picture.
Huge assortment of different colors and effects.
Moisture-resistant properties help to make the walls unique, even in the kitchen and bathroom.
In case of repainting, the existing paint layer does not need to be cleaned.
The use of water-based paint for decoration guarantees an environmentally friendly surface that does not emit toxic substances and does not cause allergies, is ideal solution decoration of the children's bedroom.
Regardless of the basis of the surface (be it concrete, drywall, plaster), it fits equally well on the wall.

Decorative painting of walls has only one requirement for the coating - it must be even.

Painting tools

Painting the walls in the apartment, in addition to the paint itself, is carried out using the following tools:

roller;
spatulas (metal, plastic, notched, rubber);
sponges;
hard brush;
sandpaper;
stencil (for the effect of drawing on a painted wall).

Before you start decorating the walls, you need to decide what kind of decorative effect you want to get, so as not to buy an extra tool. Although the price of rollers and brushes is low, they can be used more than once.

Preparing the walls

If decorating the wall with paint for the first time, you need to prepare the surface for such design solution... Preparation of walls for primary painting is carried out in stages:

Cleaning the coating from the old finish.
Surface priming.
Inspection for flaws, which are repaired if necessary.
Uneven surfaces are putty and sanded.
Reprocessing with a primer.

After all the work done, the wall is ready for decorative painting.

In order for the paint to lay on the walls evenly, and there were no defects on the coating, it is necessary to wait until the putty mixture and primer on the wall dry completely.

Types of wall decoration with paint

Due to the fact that decorative paint is too expensive, an alternative is in demand by construction professionals - artistic painting of walls with ordinary cheap paint. There are several varieties to create unique premises using ordinary paints. Let's consider them in more detail.

This is the name of painting the walls with decorative paint, which creates the effect of an old shabby surface. To create such a masterpiece, you must:

Cover the surface with the selected color.
To apply acrylic painting to create tint contrast.
Apply colored glaze to the surface in combination with the shade of the painted wall, smooth it evenly over the plane with a wide brush, and when all surfaces are covered with glaze, touch the uncured paint with the same brush.
With a round paintbrush, you need to poke randomly over the surface, thus making the walls look antique.

This method of application has only one drawback: all irregularities and bulges become more noticeable.

Such decorative painting- a great idea for decorating an office, it gives the impression that the walls are covered with leather. After preparing the surface, you need to start finishing:

We cover the walls with latex paint of our favorite color.
Making a suede brush.
Mix the glaze with latex paint, slightly darker than the surface tone.
We cover a piece of the surface with the mixture, moisten the suede brush in water and wring it out, with light touches we apply it over the not dried coating, making stains, and partially removing it.
Blot any visible lines with a piece of wet suede to give the leather a natural look.

Venetian plaster effect

One of the most beautiful and decorative ways painting walls. To recreate the Venetian effect, you must perform the following stages of work:

In a wide container you need to place latex paint... Sprinkle a little pigment for paint on one side, gently stir half with a stick so that the dark and light side comes out in the container.
We take a lighter paint on a spatula and apply it to the coating like ordinary plaster.
Dip the spatula in dark color and cover a piece of the wall.
When light and light appear on the wall dark spots, we begin to drive with a spatula along the wall in different sides to evenly smudge colors for a harmonious look.

At the final stage, the Venetian plaster is sanded with fine sandpaper and rubbed with a special wax compound.

To create the "Venetian plaster" effect, only a plastic spatula should be used during the work.

Wrinkled skin effect

This effect is simple to create, but it takes patience, because everything is done slowly, gradually.

We take a piece of paper, paint a piece of the wall according to its size.
We crumple the sheet, apply it to the surface, begin to smooth it, while creating the outlines of the crumpled coating.

The entire wall is gradually processed in small pieces.

On the video: the effect of crumpled (shabby) skin on the wall.

For decorative painting walls, you can use not only purchased tools, but also improvised means. A regular rag roller creates an interesting indoor effect that is suitable for children's rooms. In case of application this method surface preparation may not be ideal, because this type of finish hides all the imperfections on the wall.

Roller painting steps:

Apply the first coat of paint, wait for it to dry.
Dilute another shade of the base color (slightly darker than the previous one).
We moisten a rag in paint, twist it to make a tourniquet, wrap a roller with it.
Paint from the very top of the wall to the bottom in different directions to get a textured pattern.

Types of paints

Wall decoration with special dyes for wall decoration is a diverse material. They have a variety of color tones and look beautiful. Types of decorative paint differ in properties based on the composition.

The components of the composition of the paint are divided:

acrylic;
latex;
water-based;
alkyd and oil.

Acrylic paints

They are most often used for painting walls in an apartment. They are popular due to their value for money. They have the following properties:

fireproof;
make walls strong and durable;
resistant to temperature changes;
dry quickly, create protective film on the walls;
adhere well to the coating;
environmentally friendly;
have an assortment of more than a thousand.

Latex paints

lack of a pungent odor;
high degree of fire safety;
the paint does not react to a sharp change in air temperature;
dilution with plain water is possible;
dries quickly after application;
resistance to abrasion;
environmental Safety.

In addition to positive qualities, there are also negative ones. The color scheme of this type of paint does not have bright colors, and under the resulting film are created good conditions for the residence of biological organisms. Prime the surface well before using the latex stain.

Water based paints

They are in demand for painting rooms without creating an interior, their price is low, and they cope with the direct purpose of painting surfaces. The advantages of water emulsion include:

low cost of material in the construction market;
low consumption during application;
harmlessness to health;
have good moisture permeability.

Among the disadvantages of a water-based coating, experts distinguish the speed of rinsing from the coating, as well as the need for a certain temperature in the room during painting.

Alkyd and oil paints

Alkyd and oil based dyes are characterized by a rich finish color, a durable layer. Positive qualities these types of finishes are:

rich beautiful colors;
very durable layer when dry;
long service life.

Negative qualities are also present: it is a very pungent smell during painting, a large consumption of material, high price, a small assortment of colors.

In order to save money, many want to paint the walls with their own hands, without the help of professionals. But how do you apply decorative paint yourself? There are some recommendations of experts regarding the application of decorative paints to the walls:

Before painting the surface, it must be primed to avoid the appearance of mold.
Prepare the room by covering the floor with protective film.
Stir the paint well after opening it.
When using a brush, apply horizontal stripes and then smudge them vertically.
If you use a roller, you need to roll it along the tray with the material, then - from top to bottom, then cover the walls with paint, pressing the tool well (for a uniform color).

In order for the coating to turn out to be evenly colored, you must first apply a layer with a brush, and then go over the painted surface with a roller. If desired, you can apply a variety of decorative staining methods.

Do-it-yourself decorative painting of walls is a very real task. The main thing is to adhere to the instructions for using the material along with the recommendations for application.

Learning to paint surfaces decoratively (2 videos)

Various decorative painting effects (28 photos)

Create a unique background that will become important detail interior, allows you to paint the walls with your own hands in accordance with your own taste and creativity. The minimum set of tools for conducting finishing works can be combined with an unlimited number of seamless coating options for each wall in the apartment. The technology allows you to choose methods of how to apply the desired texture using industrial products or independently adapted materials at hand.

Distinctive finishing features

How construction material decorative textured paint for walls is a thick mass (white or colored with pigments) with various fillers that create a relief texture when applied. The paint has the ability to hold the applied pattern until it hardens completely.

The thickness of the permissible staining layer makes it possible to fill in small surface defects, and the texture itself visually hides the unevenness of the plane processed by this composition.

The preparatory leveling of the plastered walls for the upcoming painting is a rather laborious process. Plasterboard cladding is often used to speed up the deadlines. This decision leads to the loss of a certain part of the usable area.

The problem is removed by the applied decorative layer of paint, which only acquires an even more unusual spectacular appearance from the play of the light flux on the embossed pattern.

Example stylish design an interior that is not demanding on the ideal plane of the base is shown in the photo:

Mastering the technology and methods of work with any textured paint is not very difficult, therefore, in the absence of experience in construction and finishing work, it is worth deciding on independent execution this type of finish. First, you need to practice on a sheet of plywood, a small and non-critical section of the prepared wall. The mixture has such a solidification period that it leaves enough time for the gradual application of the pattern, its correction, if the master thought that something did not work out.

When calculating the budget for the proposed repair, you need to take into account how much material is required for the total painted area. Depending on the type of paint, it will average 1 kg / m².

Characteristic advantages

In relation to other finishing topcoats, the advantages of painting walls with textured paint refer to both decorative properties and operational characteristics the resulting front surface of the walls.

Among the main advantages are the following positions:

the plasticity of the formed layer, which does not crack under deforming forces from the natural shrinkage of the house;
dust-repellent properties for easy cleaning when cleaning;
moisture-resistant film that prevents the absorption of odors, the formation, reproduction of mold and fungi;
frost resistance;
resistance to ultraviolet radiation;
high environmental friendliness, which can be used in bedrooms and children's rooms;
application on all types of substrates ( brickwork, cement and complex mortars, wood materials, glass, metal);
ease of changing the appearance to another color during the current repair.

With moderate use, the service life textured material on the wall will be about 10 years (wallpaper in similar conditions no more than 5 years).

The photo shows an example of a simple and indefinite texture that will make minor defects of the base invisible or give a natural look:

Materials on a water-dispersion basis are universal, suitable for use in the design of the working area of the kitchen, the respectable interior of the living room, the bright and colorful atmosphere in the rooms for children.

Resistance to moisture and temperature changes makes possible design walls with paint in the bathroom and on the front of the building. Mineral mixture for exterior decoration facades can be packaged in a dry bulk form, which must be diluted with water in a prescribed proportion before work.

Effect paint

Textured wall paints with effects that liven up the environment and look different when the lighting in the room is changed have become very popular.

In a ready-to-use form, formulations are implemented with the following capabilities:

Nacre. This paint is able to brighten the room by gently reflecting the incident light. At cloudy weather in the autumn-winter period, the walls resembling a silk cloth seem to radiate warmth. With a change in the angle of view or the type of lighting, pearlescent coatings change color shades. For this, the material is called chameleon paint.
Velvet (velor). The appearance of a fleecy fabric to the paint is given by the solid grains of various colors included in its composition.
Granite. The role of granite chips is played by acrylic granules of paints of different shades, which break against the wall during successive application of the material when spraying through a spray gun.
Textured decorative mixes. They contain mineral particles, shell fragments, fine sand and other characteristic additives. The label indicates which effect is planned by the manufacturer: coral reef, seabed, spectacular brilliant relief.

At correct location point light sources embossed painting of the walls, like another sun in the room (photo):

Ready-made decorative textured mixtures do not need additional pigment additives and the use of special technology when applied to the base.

Basic principles in working with textured paint

Textured wall painting is used to create the background interior. water-based paint, since it is these materials that are produced as a white base for later giving them the desired color separately packaged pigments.

Fillers of different fractions are added to the acrylic or silicone base, which, when rubbed, scratch the textured pattern. An example of such an operation is shown in the photo:

Wavy transitions of the outer layer are obtained by adding sawdust, the sharp edges of the furrows form hard grains of quartz sand.

According to the material of dense particles included in the paint to obtain the desired consistency and texture, fillers are of the following types:

quartz sand;
granite, marble chips;
gas silicate (crushed);
metal sawdust (give a characteristic shine and play of shades);
natural or synthetic fibers;
sawdust.

Modified starch is often used as a thickener in textured wall paint.

When deciding how to paint the walls in an apartment with your own hands, so that the desired relief is obtained on the applied paint, you should pay attention to the size of the filler fraction, which should be indicated in the attached description.

The clear expression and depth of the relief grooves that the trimmed parts of the interior will acquire will depend on the grain size:

up to 0.5 mm - fine-grained filler;
0.5-1 m - medium-grained;
1-2 mm - large.

A master class on applying one of the grades of textured paint is shown in this video:

Depending on the composition of the paint, the manufacturer's instructions are attached to it on how to properly apply it to a surface made of a certain material. Therefore, it is necessary to determine how to paint the walls in the apartment with your own hands, having previously studied all the recommendations. In them, in addition, the ranges of temperatures and humidity of the base are indicated, at which it is possible to carry out work. Otherwise, life expectancy is not always met.

Create your own texture

Technically, finishing the walls with textured paint is not difficult. The main thing is such a creative aspect as creating your own original design walls.

The use of a particular tool in the application procedure does not have strict standards. In practice, the following are most often used:

structured roller with attachments of different lengths and Ø;
natural sponge;
spatula, sharp knife;
stencils and stamps;
comb;
hard brushes and brushes;
crumpled plastic wrap, wet rags.

An example of using a textured roller and multi-colored thick paints to create a bright finish is shown in the photo:

Compositions of different color can be applied with separate strokes, and then rubbed with a wet sponge, spread with wide movements with a spatula or roller.

If desired, it is worth applying such an interesting material as do-it-yourself textured wall paint, literally. Put on their hands rubber gloves and form a variety of transitions on the painted plane with your fingers.

It is better to check the instructions, but, as a rule, all operations for decorating the selected area must be completed in 15 minutes. Then the paint thickens and begins to dry out. In this regard, the size of the area to be treated should be calculated in advance. To increase the speed of work, you can do painting together. Additional benefits in appearance and protection against environment gives a coating of the created texture with wax.

It is boring and inherent only in the last century, but when they see textured wall paints, they instantly change their mind. This is because before our eyes they create incredible effects on the walls, which are impossible to achieve with the help of other means, or it is so difficult that it completely loses any meaning as part of the renovation.

Basic concepts and features of the classification

Not everyone understands what textured wall paint is. In fact, this is a finishing decorative coating that resembles in most parameters. Her distinctive feature is its composition, consistency and structure. The last distinctive factor makes it possible to distinguish structural paints among such paints, containing large particles or microgranules.

In terms of their consistency, such compositions are more reminiscent of putties, but unlike them, no matter how fun it sounds, the paints do not need to be additionally painted after application.

The basic components of such decorative compositions are the following natural and polymer ingredients:

Acrylic;
Silicone;
Silicate (sand).

Fillers in such paints can be a variety of additions, including:

Marble chips;
Dye microcapsules;
Crushed gas silicate.

In addition, in addition, such ready-made compositions are divided according to the size of the largest inclusion - with small, medium and large fractions.

The textured paint of the walls of the apartment is not suitable for everyone. To fully appreciate the created effect, not by touch, but with your own eyes, you need a large enough room. It must have at least one or. But this does not prevent the use of such paints for, and not only internal parts premises.

Advantages of decorative material

The decorative properties that textured paint for walls gives a photo reflects especially brightly. It can be figuratively compared to clay, which the sculptor turns into a real masterpiece. But besides the good external qualities such paint has many side effects, but no less useful characteristics that can be used effectively.

One of the most important of these is the protective function. It implies multilateral protection against negative factors. The vapor permeability property of such paints allows you to create. Water resistance, if set by the manufacturer, allows you to preserve the appearance of the surface for a long time under the influence of dust and other pollutants, and some of these paints even perform a function that does not allow the room to lose temperature in the autumn-winter period.

However, finishing the walls with textured paint requires some preparatory activities, which are carried out in several stages. The first stage is not always required and its implementation is implied only in the case when the walls of the premises are repaired after a long period of operation.

At the first stage, the walls are cleaned of old layers. decorative coatings and swollen layers of plaster, as their presence will contribute to the flaking of the paint.

At the next stage, the walls are treated with primers. For the majority of such decorative compositions, it is sufficient to use only primers such as concrete contact, which improve the quality of the base and increase its adhesion ability. Some require the additional use of other primers, for example, with silicate fractions, to achieve a brighter effect using the selected type of decor. Each next layer the soil is applied after the previous one has dried. The application of the primer is carried out using a paint roller, and after it dries, they proceed to.

Application technology

Painting the walls with textured paint is not carried out with brushes at all, but with other tools that allow you to hold on to a thick consistency decorative solution... These are spatulas and trowels. In addition, professionals can use mechanization of the process, for example, spray guns and similar pneumatic tools, provided that this is allowed by the paint manufacturer.

The decorative composition is supplied ready-made in tinted or white version... If desired, you can additionally add another liquid dye to it.

Advice: be sure to observe the dye dosage. Otherwise, your walls or parts of one wall may get completely different shades and will require re-painting.

Some manufacturers distribute colorants in dosage-friendly packaging. If it is not provided, use a regular pharmacy syringe, the largest volume available on the market. Do not forget also that most dyes lose their color significantly when the tinted base dries.

The thickness of the textured paint layer can vary from 7 to 15 mm. If the layer is smaller, the texture will not appear, and if the thickness is greater, then it will be more difficult to work with the composition. It is important to remember that good physical fitness is required to work with such a composition. This is especially true when the area or height does not allow to cover it completely in one pass.

Application technique

After the composition has dried, if desired, the surface can be immediately sanded and the remnants of paint dust can be removed, or the surface can be pre-processed using additional decor.

Post-processing

After the paint is completely dry, it can be further processed special means... They are tinting and protective compounds... The first ones are the same paints of the same color, but of a different shade, varnishes and other tinting agents. They are applied to the surface in order to highlight or fully reveal the subtle texture.

The greatest effect can be achieved with the use of toning of unusual shades. These are metallic, golden and similar tones, as well as chameleon compositions. The latter change color depending on the type of lighting in the room. In daylight, they can have one shade, and when artificial lighting- absolutely different at all not similar.

Tip: use your own imagination to the maximum. Do not be afraid to experiment, add sparkles if appropriate in the style of the room.

Re-tinting is applied using absolutely different instruments – paint rollers, brushes, sponges, natural sponges and even rags, depending on what degree of color you want to achieve. Still fresh tinting can be washed off if it is water-based, creating decorative streaks.

The final result can be fixed simply by drying the surface of the walls, or after drying, it is additionally treated with protective agents, for example, liquid wax.

Price category and purchase features

No matter what type of textured paint for walls it belongs to, it will not be difficult to buy it. There are many similar products and it is produced not only by European, for example, Italian, Polish and German manufacturers, but also by domestic firms. They are not so popular, however, there are many high-quality analogues in their assortment.

production of masterbatches